Hi All,
I received a Intel Nuc D34010WYK. nice and small. I installed 6.5 x86_64 on it in LEGACY boot mode on the mSATA disk. All worked except sound.
In process of trying to get that working I saw posts about Need to not use LEGACY boot mode for HDMI sound to work.
I am trying to find a document on how to use the UEFI boot on 6.5 Any great resource out there for that?
Thanks,
Jerry
There's this document:
https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/...
The important thing is that you need to install the OS with the firmware that you want to run the system with, so you'll need to re-install the system using the UEFI boot mode to boot your installation media in order to get the system going with UEFI.
Erik
On 05/02/14 07:49 AM, Jerry Geis wrote:
Hi All,
I received a Intel Nuc D34010WYK. nice and small. I installed 6.5 x86_64 on it in LEGACY boot mode on the mSATA disk. All worked except sound.
In process of trying to get that working I saw posts about Need to not use LEGACY boot mode for HDMI sound to work.
I am trying to find a document on how to use the UEFI boot on 6.5 Any great resource out there for that?
Thanks,
Jerry _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Hi Jerry,
As UEFI and LEGACY mode installations are hardware features, you need to go through the systems BIOS settings where you can find installation method settings, then flip the method from LEGACY to UEFI . You need to reinstall the OS after making this change.
Thanks,
-
dOminic -
Erik Laxdal -
Jerry Geis