We have a requirement for a new application that will be used fixed, portable, and mobile. The hardware requirements drive the need for networking as well as some general purpose and special purpose interfaces. The software requirements are quite simple in comparison to many of our much larger systems with similar hardware requirements. We are not significantly restricted in choice of storage peripherals or other devices that may be needed.
We believe that a small, single board computer will meet all requirements as long as it can run Linux. We have identified the need for approximately six prototyping units to support the initial production of about 200 to 300 operational systems. Our development and deployment time frame does not drive the need for an extremely rapid product decision, and there are pre-planned upgrade cycles over the next five years.
An internal group has achieved a significant head of steam in support of using the Pi 2 Model B. The support enthusiasm may be partly technical and partly the hype associated with jumping into the Pi community. The number of suppliers does appear to support our supply chain and sustainment requirements, however the Linux available for the Pi 2 does not appear to be optimal. It would be better if there were choices that include a standard Linux distribution such as CentOS.
This certainly seems like one of those situations where a trade of single board computer products is appropriate and achievable. There are products similar to the Pi 2 capable of running a more standard Linux distribution that we might consider. Does anyone have an experience-based single board computer recommendation?
Thanks in advance for any product recommendations.
On 04/02/2016 15:33, Chris Olson wrote:
We have a requirement for a new application that will be used fixed, portable, and mobile. The hardware requirements drive the need for networking as well as some general purpose and special purpose interfaces. The software requirements are quite simple in comparison to many of our much larger systems with similar hardware requirements. We are not significantly restricted in choice of storage peripherals or other devices that may be needed.
We believe that a small, single board computer will meet all requirements as long as it can run Linux. We have identified the need for approximately six prototyping units to support the initial production of about 200 to 300 operational systems. Our development and deployment time frame does not drive the need for an extremely rapid product decision, and there are pre-planned upgrade cycles over the next five years.
An internal group has achieved a significant head of steam in support of using the Pi 2 Model B. The support enthusiasm may be partly technical and partly the hype associated with jumping into the Pi community. The number of suppliers does appear to support our supply chain and sustainment requirements, however the Linux available for the Pi 2 does not appear to be optimal. It would be better if there were choices that include a standard Linux distribution such as CentOS.
This certainly seems like one of those situations where a trade of single board computer products is appropriate and achievable. There are products similar to the Pi 2 capable of running a more standard Linux distribution that we might consider. Does anyone have an experience-based single board computer recommendation?
Thanks in advance for any product recommendations.
Not sure if you are aware of this
https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32
But that might help the Pi fit your needs.
Tris
************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmaster@bgfl.org
The views expressed within this email are those of the individual, and not necessarily those of the organisation *************************************************************
On Fri, Feb 5, 2016 at 12:45 AM, Tris Hoar trishoar@bgfl.org wrote:
On 04/02/2016 15:33, Chris Olson wrote:
We have a requirement for a new application that will be used fixed, portable, and mobile. The hardware requirements drive the need for networking as well as some general purpose and special purpose interfaces. The software requirements are quite simple in comparison to many of our much larger systems with similar hardware requirements. We are not significantly restricted in choice of storage peripherals or other devices that may be needed.
We believe that a small, single board computer will meet all requirements as long as it can run Linux. We have identified the need for approximately six prototyping units to support the initial production of about 200 to 300 operational systems. Our development and deployment time frame does not drive the need for an extremely rapid product decision, and there are pre-planned upgrade cycles over the next five years.
An internal group has achieved a significant head of steam in support of using the Pi 2 Model B. The support enthusiasm may be partly technical and partly the hype associated with jumping into the Pi community. The number of suppliers does appear to support our supply chain and sustainment requirements, however the Linux available for the Pi 2 does not appear to be optimal. It would be better if there were choices that include a standard Linux distribution such as CentOS.
This certainly seems like one of those situations where a trade of single board computer products is appropriate and achievable. There are products similar to the Pi 2 capable of running a more standard Linux distribution that we might consider. Does anyone have an experience-based single board computer recommendation?
There are many single board computers around that can run Linux fine. But I would still personally go for Pi's because it is mainstream and lots of available resources around. If certain features are not available to fit your needs, Pi 3 is now available. I think it now supports wi-fi, in case your project need that networking capability.
Thanks in advance for any product recommendations.
Not sure if you are aware of this
https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32
But that might help the Pi fit your needs.
Tris
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmaster@bgfl.org
The views expressed within this email are those of the individual, and not necessarily those of the organisation
CentOS mailing list CentOS@centos.org https://lists.centos.org/mailman/listinfo/centos
On 04/02/16 15:33, Chris Olson wrote:
It would be better if there were choices that include a standard Linux distribution such as CentOS.
well, you can certainly run CentOS on a rpi2, and there are some other options as well.
https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32 for more info
-
Chris Olson -
Gener Badenas -
Karanbir Singh -
Tris Hoar