I am playing with a new machine I just got in and it is dying on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board.
The error I'm seeing is on loading the Kernel, I get a message that says "CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm loading Centos to make sure it is working correctly...
thanks, john
Yohoo!
From a first guess I would think the memory isnt' balanced right. On a NUMA
system (like the Opterons) it is strongly recommended to have all CPUs with the same amount of local memory. So open the case and check if the CPU0 really has some memory in his slots.
Christian Volker
Technical Support Engineer
Each CPU has 16 gig
john
Christian Volker wrote:
Yohoo!
From a first guess I would think the memory isnt' balanced right. On a NUMA
system (like the Opterons) it is strongly recommended to have all CPUs with the same amount of local memory. So open the case and check if the CPU0 really has some memory in his slots.
Christian Volker
Technical Support Engineer
John:
I have had strange problems like this from a bad or mis-seated memory stick.
Run a memtest and see if it gives you an errors.
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 1:37 PM To: centos@centos.org Subject: [CentOS] New machine dying on boot.... - CPU 0 not enough memory for domain -
I am playing with a new machine I just got in and it is dying on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board.
The error I'm seeing is on loading the Kernel, I get a message that says "CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm loading Centos to make sure it is working correctly...
thanks, john
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
All the memory tested OK , no errors...
john
Neil Aggarwal wrote:
John:
I have had strange problems like this from a bad or mis-seated memory stick.
Run a memtest and see if it gives you an errors.
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 1:37 PM To: centos@centos.org Subject: [CentOS] New machine dying on boot.... - CPU 0 not enough memory for domain -
I am playing with a new machine I just got in and it is dying on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board.
The error I'm seeing is on loading the Kernel, I get a message that says "CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm loading Centos to make sure it is working correctly...
thanks, john
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
John:
That was too quick. Did you run the test before?
What test did you use?
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com http://www.spammilter.com/ for details.
_____
From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 3:43 PM To: CentOS mailing list Subject: Re: [CentOS] New machine dying on boot.... - CPU 0 not enough memoryfor domain -
All the memory tested OK , no errors...
john
Neil Aggarwal wrote:
John:
I have had strange problems like this from a bad
or mis-seated memory stick.
Run a memtest and see if it gives you an errors.
Neil
--
Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com
Eliminate junk email and reclaim your inbox.
Visit http://www.spammilter.com for details.
-----Original Message-----
From: centos-bounces@centos.org
[mailto:centos-bounces@centos.org] On Behalf Of John Plemons
Sent: Tuesday, November 13, 2007 1:37 PM
To: centos@centos.org
Subject: [CentOS] New machine dying on boot.... - CPU 0 not
enough memory for domain -
I am playing with a new machine I just got in and it is dying
on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8)
eight dual core AMD 855 cpu's with 128 gig of ram, not 128
meg, but 128
gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built
onto the board.
The error I'm seeing is on loading the Kernel, I get a
message that says
"CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it
chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm
loading Centos to make sure it is working correctly...
thanks,
john
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
I ran the test prior to trying to do the OS load... I defaulted to the mem test on board, it ran 4-5 times, guessing about 15 minutes per run...
john
Neil Aggarwal wrote:
John:
That was too quick. Did you run the test before?
What test did you use?
Neil-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com http://www.spammilter.com/ for details.
------------------------------------------------------------------------ *From:* centos-bounces@centos.org [mailto:centos-bounces@centos.org] *On Behalf Of *John Plemons *Sent:* Tuesday, November 13, 2007 3:43 PM *To:* CentOS mailing list *Subject:* Re: [CentOS] New machine dying on boot.... - CPU 0 not enough memoryfor domain - All the memory tested OK , no errors... john Neil Aggarwal wrote:John: I have had strange problems like this from a bad or mis-seated memory stick. Run a memtest and see if it gives you an errors. Neil -- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 1:37 PM To: centos@centos.org Subject: [CentOS] New machine dying on boot.... - CPU 0 not enough memory for domain - I am playing with a new machine I just got in and it is dying on boot... I'm wondering if it is to much machine for Centos to run.. It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board. The error I'm seeing is on loading the Kernel, I get a message that says "CPU 0 not enough memory for domain" I'm lost with 128 gig of ram I'd think there is plenty of memory... The load is a fresh install ( today ) of Centos 5 - x86_64 version Used the defaults on all of the items it is vanilla as can be, yet it chokes and dies... As for the machine, it is a new machine that I just picked up, I'm loading Centos to make sure it is working correctly... thanks, john _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
John:
Are you talking about the BIOS memory check? That is not very thorough.
Try booting from the CD and typing linux memtest from the boot prompt. It should take hours to run.
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com http://www.spammilter.com/ for details.
_____
From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 3:50 PM To: CentOS mailing list Subject: Re: [CentOS] New machine dying on boot.... - CPU 0 notenough memoryfor domain -
I ran the test prior to trying to do the OS load... I defaulted to the mem test on board, it ran 4-5 times, guessing about 15 minutes per run...
john
Neil Aggarwal wrote:
John:
That was too quick. Did you run the test before?
What test did you use?
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com http://www.spammilter.com/ for details.
_____
From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 3:43 PM To: CentOS mailing list Subject: Re: [CentOS] New machine dying on boot.... - CPU 0 not enough memoryfor domain -
All the memory tested OK , no errors...
john
Neil Aggarwal wrote:
John:
I have had strange problems like this from a bad
or mis-seated memory stick.
Run a memtest and see if it gives you an errors.
Neil
--
Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com
Eliminate junk email and reclaim your inbox.
Visit http://www.spammilter.com for details.
-----Original Message-----
From: centos-bounces@centos.org
[mailto:centos-bounces@centos.org] On Behalf Of John Plemons
Sent: Tuesday, November 13, 2007 1:37 PM
To: centos@centos.org
Subject: [CentOS] New machine dying on boot.... - CPU 0 not
enough memory for domain -
I am playing with a new machine I just got in and it is dying
on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8)
eight dual core AMD 855 cpu's with 128 gig of ram, not 128
meg, but 128
gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built
onto the board.
The error I'm seeing is on loading the Kernel, I get a
message that says
"CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it
chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm
loading Centos to make sure it is working correctly...
thanks,
john
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
_____
_______________________________________________
CentOS mailing list
CentOS@centos.org
Interesting that the error didn't show up during the install of the OS, Centos saw all of the CPU's, the memory and didn't blink once. I did an install everything, maybe I should back off and reduce the role of the machine. Perhaps there is something trying to load in the Kernel it doesn't like..
john
Neil Aggarwal wrote:
John:
I have had strange problems like this from a bad or mis-seated memory stick.
Run a memtest and see if it gives you an errors.
Neil
-- Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of John Plemons Sent: Tuesday, November 13, 2007 1:37 PM To: centos@centos.org Subject: [CentOS] New machine dying on boot.... - CPU 0 not enough memory for domain -
I am playing with a new machine I just got in and it is dying on boot...
I'm wondering if it is to much machine for Centos to run..
It is a Generic machine using a Tyan Thunder motherboard running (8) eight dual core AMD 855 cpu's with 128 gig of ram, not 128 meg, but 128 gig of ram. (2) SCSI 146 Seagate Drives. ATI Graphics built onto the board.
The error I'm seeing is on loading the Kernel, I get a message that says "CPU 0 not enough memory for domain"
I'm lost with 128 gig of ram I'd think there is plenty of memory...
The load is a fresh install ( today ) of Centos 5 - x86_64 version
Used the defaults on all of the items it is vanilla as can be, yet it chokes and dies...
As for the machine, it is a new machine that I just picked up, I'm loading Centos to make sure it is working correctly...
thanks, john
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
Christian Volker -
John Plemons -
Neil Aggarwal