CentOS 6.4, clean install. Zimbra 8.0.3
I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27
I entered this in /etc/hosts:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me
but `hostname -f` says:
$ hostname -f hostname: Unknown host
Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to the virtual IP?
Jason
Jason T. Slack-Moehrle wrote:
CentOS 6.4, clean install. Zimbra 8.0.3
I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27
I entered this in /etc/hosts:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me
but `hostname -f` says:
$ hostname -f hostname: Unknown host
Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to the virtual IP?
Quick check: is the hostname showing in /var/log/messages? If not, did you either reboot the box, or set the hostname manually, or restart the network? It won't take effect until you do one of those.
mark
Hi Mark,
I did a reboot and not `hostname -f` says: mail.
But I think that will still be wrong in terms of what Zimbra is looking for.
When I did the install I set the hostname to `webserver.localdomain`, so I see in /var/log/messages: `Apr 7 12:35:48 webserver kernel: SRAT: PXM 0 -> APIC 0 -> Node 0`
I think I might need to trick Zimbra bu changing:
192.168.1.27 mail mail.meowbox.me meowbox.me
to
192.168.1.27 mail.meowbox.me mail.meowbox.me meowbox.me
Jason
On Mon, Apr 8, 2013 at 11:26 AM, m.roth@5-cent.us wrote:
Jason T. Slack-Moehrle wrote:
CentOS 6.4, clean install. Zimbra 8.0.3
I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27
I entered this in /etc/hosts:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me
but `hostname -f` says:
$ hostname -f hostname: Unknown host
Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to the virtual IP?
Quick check: is the hostname showing in /var/log/messages? If not, did you either reboot the box, or set the hostname manually, or restart the network? It won't take effect until you do one of those.
mark
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 04/08/2013 01:35 PM, Jason T. Slack-Moehrle wrote:
Hi Mark,
I did a reboot and not `hostname -f` says: mail.
But I think that will still be wrong in terms of what Zimbra is looking for.
When I did the install I set the hostname to `webserver.localdomain`, so I see in /var/log/messages: `Apr 7 12:35:48 webserver kernel: SRAT: PXM 0 -> APIC 0 -> Node 0`
I think I might need to trick Zimbra bu changing:
192.168.1.27 mail mail.meowbox.me meowbox.me
to
192.168.1.27 mail.meowbox.me mail.meowbox.me meowbox.me
Jason
On Mon, Apr 8, 2013 at 11:26 AM, m.roth@5-cent.us wrote:
Jason T. Slack-Moehrle wrote:
CentOS 6.4, clean install. Zimbra 8.0.3
I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27
I entered this in /etc/hosts:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me
but `hostname -f` says:
$ hostname -f hostname: Unknown host
Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to the virtual IP?
Quick check: is the hostname showing in /var/log/messages? If not, did you either reboot the box, or set the hostname manually, or restart the network? It won't take effect until you do one of those.
What is the hostname listed in /etc/sysconfig/network ?
Hi Johnny:
# cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=mail.meowbox.me
Jason
On Mon, Apr 8, 2013 at 11:45 AM, Johnny Hughes johnny@centos.org wrote:
On 04/08/2013 01:35 PM, Jason T. Slack-Moehrle wrote:
Hi Mark,
I did a reboot and not `hostname -f` says: mail.
But I think that will still be wrong in terms of what Zimbra is looking
for.
When I did the install I set the hostname to `webserver.localdomain`, so
I
see in /var/log/messages: `Apr 7 12:35:48 webserver kernel: SRAT: PXM 0 -> APIC 0 -> Node 0`
I think I might need to trick Zimbra bu changing:
192.168.1.27 mail mail.meowbox.me meowbox.me
to
192.168.1.27 mail.meowbox.me mail.meowbox.me meowbox.me
Jason
On Mon, Apr 8, 2013 at 11:26 AM, m.roth@5-cent.us wrote:
Jason T. Slack-Moehrle wrote:
CentOS 6.4, clean install. Zimbra 8.0.3
I am behind a PfSense box using a virtual IP. So the IP of the box is 192.168.1.27
I entered this in /etc/hosts:
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 192.168.1.27 mail mail.meowbox.me meowbox.me
but `hostname -f` says:
$ hostname -f hostname: Unknown host
Do I need to put the public IP for where this record resolves? Since PFSense is forwarding traffic from it to the virtual IP?
Quick check: is the hostname showing in /var/log/messages? If not, did
you
either reboot the box, or set the hostname manually, or restart the network? It won't take effect until you do one of those.
What is the hostname listed in /etc/sysconfig/network ?
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 4/8/2013 11:17 AM, Jason T. Slack-Moehrle wrote:
but `hostname -f` says:
$ hostname -f hostname: Unknown host
put the hostname in /etc/sysconfig/network, as ..
HOSTNAME=full.domain.name.com
example...
$ more /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=hostname.mydomain.com GATEWAY=x.y.w.x
John,
Weird question, but if web and e-mail are going to be on the same box. Do I need to do mail.hostname.tld or can I just to hostname.tld?
For the MeowBox.me domain. for DNS A-record: @ is the public IP A-record mail is the public IP.
Mx record is 0 mail mail.meowbox.me
On Mon, Apr 8, 2013 at 11:46 AM, John R Pierce pierce@hogranch.com wrote:
On 4/8/2013 11:17 AM, Jason T. Slack-Moehrle wrote:
but `hostname -f` says:
$ hostname -f hostname: Unknown host
put the hostname in /etc/sysconfig/network, as ..
HOSTNAME=full.domain.name.com
example...
$ more /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=hostname.mydomain.com GATEWAY=x.y.w.x
-- john r pierce 37N 122W somewhere on the middle of the left coast
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 4/8/2013 11:52 AM, Jason T. Slack-Moehrle wrote:
Weird question, but if web and e-mail are going to be on the same box. Do I need to do mail.hostname.tld or can I just to hostname.tld?
For the MeowBox.me domain. for DNS A-record: @ is the public IP A-record mail is the public IP.
Mx record is 0 mail mail.meowbox.me
the FQDN hostname can be whatever.
Thanks everyone for all of the help, I appreciate it.
On Mon, Apr 8, 2013 at 12:09 PM, John R Pierce pierce@hogranch.com wrote:
On 4/8/2013 11:52 AM, Jason T. Slack-Moehrle wrote:
Weird question, but if web and e-mail are going to be on the same box.
Do I
need to do mail.hostname.tld or can I just to hostname.tld?
For the MeowBox.me domain. for DNS A-record: @ is the public IP A-record mail is the public IP.
Mx record is 0 mail mail.meowbox.me
the FQDN hostname can be whatever.
-- john r pierce 37N 122W somewhere on the middle of the left coast
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
Jason T. Slack-Moehrle -
John R Pierce -
Johnny Hughes -
m.roth＠5-cent.us