I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration I know of, and nothing tells it to mirror, or one rotate and the other not. But when I use the menu, and go to system->preferences-display, it shows mirror screens *always* checked. I uncheck that, and hit apply, and nothing happens. I move the one off from over the other, and rotate the other, and still, nothing at all happens, and I don't see anything written, anywhere.
Suggestions?
mark
m.roth@5-cent.us wrote:
I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration I know of, and nothing tells it to mirror, or one rotate and the other not. But when I use the menu, and go to system->preferences-display, it shows mirror screens *always* checked. I uncheck that, and hit apply, and nothing happens. I move the one off from over the other, and rotate the other, and still, nothing at all happens, and I don't see anything written, anywhere.
Suggestions?
A couple other things: the /etc/X11/xorg.conf that I fought successfully last year is still in place, but it acts as though it's ignoring it.
mark
Anything enlightening showing up in /var/log/Xorg.0.log? Maybe something explaining why your conf is being ignored?
Kahlil (Kal) Hodgson GPG: C9A02289 Head of Technology (m) +61 (0) 4 2573 0382 DealMax Pty Ltd (w) +61 (0) 3 9008 5281
Suite 1415 401 Docklands Drive Docklands VIC 3008 Australia
"All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer." -- IBM maintenance manual, 1925
On Tue, Sep 23, 2014 at 7:37 AM, m.roth@5-cent.us wrote:
m.roth@5-cent.us wrote:
I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration I know of, and nothing tells it to mirror, or one rotate and the other not. But when I use the menu, and go to system->preferences-display, it shows mirror screens *always* checked. I uncheck that, and hit apply, and nothing happens. I move the one off from over the other, and rotate the other, and still, nothing at all happens, and I don't see anything written, anywhere.
Suggestions?
A couple other things: the /etc/X11/xorg.conf that I fought successfully last year is still in place, but it acts as though it's ignoring it.
mark
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 22/09/14 22:37, m.roth@5-cent.us wrote:
m.roth@5-cent.us wrote:
I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration I know of, and nothing tells it to mirror, or one rotate and the other not. But when I use the menu, and go to system->preferences-display, it shows mirror screens *always* checked. I uncheck that, and hit apply, and nothing happens. I move the one off from over the other, and rotate the other, and still, nothing at all happens, and I don't see anything written, anywhere.
Suggestions?
A couple other things: the /etc/X11/xorg.conf that I fought successfully last year is still in place, but it acts as though it's ignoring it.
mark
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Hi,
Is this C6 or C7?
If it's C7 I had the same issue with ignoring nvidia configuration, turns out it wasn't Xorg at all.
It was GDM resetting everything when it loaded, switched to LightDM problem solved as it was using Xorg configuration again!
Worth a shot if it's C7 :-).
Kind Regards, Jake Shipton (JakeMS) GPG Key: 0xE3C31D8F GPG Fingerprint: 7515 CC63 19BD 06F9 400A DE8A 1D0B A5CF E3C3 1D8F
On 09/23/14 19:21, Jake Shipton wrote:
On 22/09/14 22:37, m.roth@5-cent.us wrote:
m.roth@5-cent.us wrote:
I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration
<snip>
Is this C6 or C7?
If it's C7 I had the same issue with ignoring nvidia configuration, turns out it wasn't Xorg at all.
It was GDM resetting everything when it loaded, switched to LightDM problem solved as it was using Xorg configuration again!
Worth a shot if it's C7 :-).
C6, and yep, that's probably what's happening anyway. I went to apologize yesterday morning for having left it that way, and he was fine: *after* he logged in, everything was the correct direction.
I need to lok at the damn GDM (another reason to dislike gnome).
mark
On 24/09/14 13:02, mark wrote:
On 09/23/14 19:21, Jake Shipton wrote:
On 22/09/14 22:37, m.roth@5-cent.us wrote:
m.roth@5-cent.us wrote:
I have one user. We've pretty much all got two monitors, but he insists on rotating both of them vertically - that is, they're taller than they are wide, and he's got a Radeon card. I always have X grief on his system when I update it....
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored. I've logged in as root, looked at all the configuration
<snip> > Is this C6 or C7? > > If it's C7 I had the same issue with ignoring nvidia > configuration, turns out it wasn't Xorg at all. > > It was GDM resetting everything when it loaded, switched to > LightDM problem solved as it was using Xorg configuration again! > > Worth a shot if it's C7 :-).
C6, and yep, that's probably what's happening anyway. I went to apologize yesterday morning for having left it that way, and he was fine: *after* he logged in, everything was the correct direction.
I need to lok at the damn GDM (another reason to dislike gnome).
mark
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Yeah.. I'm not a fan of gnome either.
I had XFCE during the lifetime of my C6 Install, and now have XFCE on my C7 install.
I know XFCE isn't exactly very "modern" or "hip" "cool" etc. But it does the job, and works for me :). I like it.
I had issues getting the sort order of my 3 monitors correct, the third monitor would overlap onto the second monitor and the first monitor was detected to be in position 2, so the mouse had to go the other way to reach it.
(Basically, all wrong)
I resolved all display issues using the following method on C6: 1) Install LightDM 2) Set LightDM as default display manager 3) Remove any "display" configuration set by Gnome/XFCE.. in case of XFCE remove ~/.config/xfce4/xfconf/xfce-perchannel-xml/display.xml
I'm sure gnome has a similar file around somewhere. 4) Reboot 5) Done, you should now be using xorg.conf only.
Hope this helps :-).
Kind Regards, Jake Shipton (JakeMS) GPG Key: 0xE3C31D8F GPG Fingerprint: 7515 CC63 19BD 06F9 400A DE8A 1D0B A5CF E3C3 1D8F
On 09/23/2014 12:06 AM, m.roth@5-cent.us wrote:
I just did a full update. X comes up in both screens... but the left one is *not* rotated, while the right one is. And they're mirrored.
I tend to use arandr for screens settings. It generates the appropriate xrandr invocation that I call at session login. Unfortunately, that doesnt solved the issue for thing before the session (boot sequence and display manager)...
Hi Guys ..
Had some attempted attacks on my Apache server has been blocked in firewall. But I'm still getting the messages below in /var/log/messages.
httpd[2620] general protection ip:3bf3e06bdb sp:7f0b93ffd5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[15000] general protection ip:3bf3e06bdb sp:7f0b921fa5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[5082] general protection ip:3bf3e06bdb sp:7f0b93ffd5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[51964] general protection ip:3bf3e06bdb sp:7f0b92bfb5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[22943] general protection ip:7f0b9d5b8698 sp:7f0b6f1c3e78 error:0 in libapr- 1.so.0.5.0[7f0b9d591000+31000] httpd[32595] general protection ip:3bf3e06bdb sp:7f0b93ffd5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[64221] general protection ip:3bf3e06bdb sp:7f0b9abea5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[29063] trap stack segment ip:7f0b9d5a95fc sp:7f0b9bfed640 error:0 httpd[15530] general protection ip:3bf3e06bdb sp:7f0b921fa5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[44466] general protection ip:3bf3e06bdb sp:7f0b997e85c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[23080] general protection ip:3bf3e06bdb sp:7f0b98de75c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[42886] general protection ip:3bf3e06bdb sp:7f0b9b5eb5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[27568] general protection ip:3bf3e06bdb sp:7f0b917f95c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[7030] general protection ip:3bf3e06bdb sp:7f0b921fa5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[60528] general protection ip:3bf3e06bdb sp:7f0b997e85c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[41597] general protection ip:3bf3e06bdb sp:7f0b921fa5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[19705] general protection ip:3bf3e06bdb sp:7f0b93ffd5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[44412] general protection ip:3bf3e06bdb sp:7f0b9b5eb5c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] httpd[39649] general protection ip:3bf3e06bdb sp:7f0b9a1e95c0 error:0 in libpthread- 2.12.so[3bf3e00000+17000] TCP: Peer 186.218.135.23:39270/80 unexpectedly shrunk window 3452381837:3452385970 (repaired) TCP: Peer 189.102.77.211:49948/80 unexpectedly shrunk window 3478909007:3478933827 (repaired) TCP: Peer 189.102.77.211:49948/80 unexpectedly shrunk window 3478909007:3478933827 (repaired)
Can anyone tell me what does this mean? Researched but I not found.
Thank you
-
Eduardo Augusto Pinto -
Jake Shipton -
Kahlil Hodgson -
m.roth＠5-cent.us -
mark
-
Mihamina Rakotomandimby