On Monday 10 December 2007 00:23:27 Saurabh Sharma wrote:
[root@localhost log]# tail -10 dmesg EXT3 FS on hdc9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Adding 522072k swap on /dev/hdc11. Priority:-1 extents:1 across:522072k
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
on 12/10/2007 8:59 AM Saurabh Sharma spake the following:
Fajar Priyanto wrote:
On Monday 10 December 2007 00:23:27 Saurabh Sharma wrote:
[root@localhost log]# tail -10 dmesg EXT3 FS on hdc9, internal journal EXT3-fs: mounted filesystem with ordered data mode. FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value FAT: Unrecognized mount option "rw.defaults" or missing value EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Adding 522072k swap on /dev/hdc11. Priority:-1 extents:1 across:522072k
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Thanks for correcting me ,with the mistake.Now no error were logged and directories were mounted. :-) But the File Sytem type is still FAT16.what's the issue with file system type. I formated the /dev/hdc12 using /mkfs.ext3 /but the file system shown is still FAT16.
/[root@localhost etc]# mkfs.ext3 /dev/hdc12 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2289280 inodes, 4570484 blocks 228524 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 140 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
But what is the partition type set to? If they are set to 0x04 they will show up as fat16, for ext2/3 they need to be 0x83.
Scott Silva wrote:
on 12/10/2007 8:59 AM Saurabh Sharma spake the following:
Fajar Priyanto wrote:
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Thanks for correcting me ,with the mistake.Now no error were logged and directories were mounted. :-) But the File Sytem type is still FAT16.what's the issue with file system type. I formated the /dev/hdc12 using /mkfs.ext3 /but the file system shown is still FAT16.
/[root@localhost etc]# mkfs.ext3 /dev/hdc12 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2289280 inodes, 4570484 blocks 228524 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 140 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
But what is the partition type set to? If they are set to 0x04 they will show up as fat16, for ext2/3 they need to be 0x83.
Thanks for replying,as i'm too new to linux i dont know how to set the partition type,i just google for things and move ahead.Can you please let me know how to get this done or what all you meant.After Scott's comments i just goggled and found parted,which showed partitions type as FAT32,this is just opposite to one shown by fdisk -l.
[root@XBox ~]# parted /dev/hdc print
Model: ST3250820A (ide) Disk /dev/hdc: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos
Number Start End Size Type File system Flags 1 32.3kB 10.5GB 10.5GB primary ntfs boot 2 10.5GB 250GB 240GB extended lba 5 10.5GB 62.9GB 52.4GB logical fat32 6 62.9GB 115GB 52.4GB logical fat32 7 115GB 168GB 52.4GB logical fat32 8 168GB 220GB 52.4GB logical fat32 9 220GB 220GB 107MB logical ext3 10 220GB 231GB 10.5GB logical ext3 11 231GB 231GB 535MB logical linux-swap 12 231GB 250GB 18.7GB logical ext3
Information: Don't forget to update /etc/fstab, if necessary.
Please help me grow...!
Thanks and Regards Saurabh Sharma
on 12/11/2007 8:02 AM Saurabh Sharma spake the following:
Scott Silva wrote:
on 12/10/2007 8:59 AM Saurabh Sharma spake the following:
Fajar Priyanto wrote:
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Thanks for correcting me ,with the mistake.Now no error were logged and directories were mounted. :-) But the File Sytem type is still FAT16.what's the issue with file system type. I formated the /dev/hdc12 using /mkfs.ext3 /but the file system shown is still FAT16.
/[root@localhost etc]# mkfs.ext3 /dev/hdc12 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2289280 inodes, 4570484 blocks 228524 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 140 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
But what is the partition type set to? If they are set to 0x04 they will show up as fat16, for ext2/3 they need to be 0x83.
Thanks for replying,as i'm too new to linux i dont know how to set the partition type,i just google for things and move ahead.Can you please let me know how to get this done or what all you meant.After Scott's comments i just goggled and found parted,which showed partitions type as FAT32,this is just opposite to one shown by fdisk -l.
[root@XBox ~]# parted /dev/hdc print
Model: ST3250820A (ide) Disk /dev/hdc: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos
Number Start End Size Type File system Flags 1 32.3kB 10.5GB 10.5GB primary ntfs boot 2 10.5GB 250GB 240GB extended lba 5 10.5GB 62.9GB 52.4GB logical fat32 6 62.9GB 115GB 52.4GB logical fat32 7 115GB 168GB 52.4GB logical fat32 8 168GB 220GB 52.4GB logical fat32 9 220GB 220GB 107MB logical ext3 10 220GB 231GB 10.5GB logical ext3 11 231GB 231GB 535MB logical linux-swap 12 231GB 250GB 18.7GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary.
Please help me grow...!
If you run fdisk /dev/hdc, you can change the partition types. At the fdisk prompt, a "p" will list the partition table. From there you use "t" to change a partition type. Ext2/3 partitions are type 83 and linux swap is type 82. Make sure you only change the partitions that you wanted to be ext3, and not your windows partitions. A "w" will write the new table and exit, and a "q" exits without writing if you make a mistake. A "m" gives a list of choices (menu).
Scott Silva wrote:
on 12/11/2007 8:02 AM Saurabh Sharma spake the following:
Scott Silva wrote:
on 12/10/2007 8:59 AM Saurabh Sharma spake the following:
Fajar Priyanto wrote:
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Thanks for correcting me ,with the mistake.Now no error were logged and directories were mounted. :-) But the File Sytem type is still FAT16.what's the issue with file system type. I formated the /dev/hdc12 using /mkfs.ext3 /but the file system shown is still FAT16.
/[root@localhost etc]# mkfs.ext3 /dev/hdc12 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2289280 inodes, 4570484 blocks 228524 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 140 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
But what is the partition type set to? If they are set to 0x04 they will show up as fat16, for ext2/3 they need to be 0x83.
Thanks for replying,as i'm too new to linux i dont know how to set the partition type,i just google for things and move ahead.Can you please let me know how to get this done or what all you meant.After Scott's comments i just goggled and found parted,which showed partitions type as FAT32,this is just opposite to one shown by fdisk -l.
[root@XBox ~]# parted /dev/hdc print
Model: ST3250820A (ide) Disk /dev/hdc: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos
Number Start End Size Type File system Flags 1 32.3kB 10.5GB 10.5GB primary ntfs boot 2 10.5GB 250GB 240GB extended lba 5 10.5GB 62.9GB 52.4GB logical fat32 6 62.9GB 115GB 52.4GB logical fat32 7 115GB 168GB 52.4GB logical fat32 8 168GB 220GB 52.4GB logical fat32 9 220GB 220GB 107MB logical ext3 10 220GB 231GB 10.5GB logical ext3 11 231GB 231GB 535MB logical linux-swap 12 231GB 250GB 18.7GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary.
Please help me grow...!
If you run fdisk /dev/hdc, you can change the partition types. At the fdisk prompt, a "p" will list the partition table. From there you use "t" to change a partition type. Ext2/3 partitions are type 83 and linux swap is type 82. Make sure you only change the partitions that you wanted to be ext3, and not your windows partitions. A "w" will write the new table and exit, and a "q" exits without writing if you make a mistake. A "m" gives a list of choices (menu).
The thing worked,the way is really great...... ...thanks for the support.... :-) Thanks & Regards Saurabh
on 12/12/2007 4:40 PM Saurabh Sharma spake the following:
Scott Silva wrote:
on 12/11/2007 8:02 AM Saurabh Sharma spake the following:
Scott Silva wrote:
on 12/10/2007 8:59 AM Saurabh Sharma spake the following:
Fajar Priyanto wrote:
Hello, I believe the options in /etc/fstab should be: defaults,rw ? Not defaults [dot] rw
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Thanks for correcting me ,with the mistake.Now no error were logged and directories were mounted. :-) But the File Sytem type is still FAT16.what's the issue with file system type. I formated the /dev/hdc12 using /mkfs.ext3 /but the file system shown is still FAT16.
/[root@localhost etc]# mkfs.ext3 /dev/hdc12 mke2fs 1.39 (29-May-2006) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 2289280 inodes, 4570484 blocks 228524 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 140 block groups 32768 blocks per group, 32768 fragments per group 16352 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 25 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
But what is the partition type set to? If they are set to 0x04 they will show up as fat16, for ext2/3 they need to be 0x83.
Thanks for replying,as i'm too new to linux i dont know how to set the partition type,i just google for things and move ahead.Can you please let me know how to get this done or what all you meant.After Scott's comments i just goggled and found parted,which showed partitions type as FAT32,this is just opposite to one shown by fdisk -l.
[root@XBox ~]# parted /dev/hdc print
Model: ST3250820A (ide) Disk /dev/hdc: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos
Number Start End Size Type File system Flags 1 32.3kB 10.5GB 10.5GB primary ntfs boot 2 10.5GB 250GB 240GB extended lba 5 10.5GB 62.9GB 52.4GB logical fat32 6 62.9GB 115GB 52.4GB logical fat32 7 115GB 168GB 52.4GB logical fat32 8 168GB 220GB 52.4GB logical fat32 9 220GB 220GB 107MB logical ext3 10 220GB 231GB 10.5GB logical ext3 11 231GB 231GB 535MB logical linux-swap 12 231GB 250GB 18.7GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary.
Please help me grow...!
If you run fdisk /dev/hdc, you can change the partition types. At the fdisk prompt, a "p" will list the partition table. From there you use "t" to change a partition type. Ext2/3 partitions are type 83 and linux swap is type 82. Make sure you only change the partitions that you wanted to be ext3, and not your windows partitions. A "w" will write the new table and exit, and a "q" exits without writing if you make a mistake. A "m" gives a list of choices (menu).
The thing worked,the way is really great...... ...thanks for the support.... :-) Thanks & Regards Saurabh
Since you are just starting out, there is a wealth of info on the net for every level from newbie to guru. http://www.linuxhelp.net/ http://www.linuxquestions.org/ http://www.justlinux.com/ http://www.reallylinux.com/docs/consult.shtml
Just some from a quick google search. There are answers to every question floating around on the world's largest public library. Welcome to the Linux world!
-
Fajar Priyanto -
Saurabh Sharma -
Scott Silva