Hi Friends,
I am trying to compile mod_jk on Centos 5.2 64-bit but I am getting apxs not found. Whereas apxs is already there on the server
type apxs apxs is /usr/sbin/apxs
./configure CFLAGS=' -arch x86_64 ' APXSLDFLAGS=' -arch x86_64 ' --with-apxs=/usr/sbin/apxs
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for test... /usr/bin/test
checking for rm... /bin/rm
checking for grep... /bin/grep
checking for echo... /bin/echo
checking for sed... /bin/sed
checking for cp... /bin/cp
checking for mkdir... /bin/mkdir
need to check for Perl first, apxs depends on it...
checking for perl... /usr/bin/perl
could not find /usr/sbin/apxs
configure: error: You must specify a valid --with-apxs path
httpd-devel is already installed on this server but still the error persisting.
Installed Packages httpd.x86_64 2.2.3-11.el5_1.centos. installed httpd-devel.x86_64 2.2.3-11.el5_1.centos. installed httpd-manual.x86_64 2.2.3-11.el5_1.centos. installed
Below is the config.log file
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.60. Invocation command line was
$ ./configure CFLAGS=-arch x86_64 APXSLDFLAGS=-arch x86_64 --with-apxs=/usr/sbin/apxs
## --------- ##
## Platform. ##
## --------- ##
hostname = webserver.example.com
uname -m = x86_64
uname -r = 2.6.18-92.el5
uname -s = Linux
uname -v = #1 SMP Tue Jun 10 18:51:06 EDT 2008
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/kerberos/sbin
PATH: /usr/kerberos/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /root/bin
/configure CFLAGS=' -arch x86_64 ' APXSLDFLAGS=' -arch x86_64 ' --with-apxs=/usr/sbin/apxs
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for test... /usr/bin/test
checking for rm... /bin/rm
checking for grep... /bin/grep
checking for echo... /bin/echo
checking for sed... /bin/sed
checking for cp... /bin/cp
checking for mkdir... /bin/mkdir
need to check for Perl first, apxs depends on it...
checking for perl... /usr/bin/perl
could not find /usr/sbin/apxs
configure: error: You must specify a valid --with-apxs path
cat config.log | more
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by configure, which was
generated by GNU Autoconf 2.60. Invocation command line was
$ ./configure CFLAGS=-arch x86_64 APXSLDFLAGS=-arch x86_64 --with-apxs=/usr/sbin/apxs
## --------- ##
## Platform. ##
## --------- ##
hostname = webserver.example.com
uname -m = x86_64
uname -r = 2.6.18-92.el5
uname -s = Linux
uname -v = #1 SMP Tue Jun 10 18:51:06 EDT 2008
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/kerberos/sbin
PATH: /usr/kerberos/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /root/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1996: checking build system type
configure:2014: result: x86_64-unknown-linux-gnu
configure:2036: checking host system type
configure:2051: result: x86_64-unknown-linux-gnu
configure:2073: checking target system type
configure:2088: result: x86_64-unknown-linux-gnu
configure:2134: checking for a BSD-compatible install
configure:2190: result: /usr/bin/install -c
configure:2201: checking whether build environment is sane
configure:2244: result: yes
configure:2309: checking for gawk
configure:2325: found /bin/gawk
configure:2336: result: gawk
configure:2347: checking whether make sets $(MAKE)
configure:2368: result: yes
configure:2563: checking for test
configure:2581: found /usr/bin/test
configure:2594: result: /usr/bin/test
configure:2605: checking for rm
configure:2623: found /bin/rm
configure:2636: result: /bin/rm
configure:2647: checking for grep
configure:2665: found /bin/grep
configure:2678: result: /bin/grep
configure:2689: checking for echo
configure:2707: found /bin/echo
configure:2720: result: /bin/echo
configure:2731: checking for sed
configure:2749: found /bin/sed
configure:2762: result: /bin/sed
configure:2773: checking for cp
configure:2791: found /bin/cp
configure:2804: result: /bin/cp
configure:2815: checking for mkdir
configure:2833: found /bin/mkdir
configure:2846: result: /bin/mkdir
configure:2871: result: need to check for Perl first, apxs depends on it...
configure:2875: checking for perl
configure:2893: found /usr/bin/perl
configure:2906: result: /usr/bin/perl
configure:2969: result: could not find /usr/sbin/apxs
configure:2971: error: You must specify a valid --with-apxs path
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-arch x86_64'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=
ac_cv_env_CXXFLAGS_value=
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_F77_set=
ac_cv_env_F77_value=
ac_cv_env_FFLAGS_set=
ac_cv_env_FFLAGS_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_path_CP=/bin/cp
ac_cv_path_ECHO=/bin/echo
ac_cv_path_GREP=/bin/grep
ac_cv_path_MKDIR=/bin/mkdir
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_RM=/bin/rm
ac_cv_path_SED=/bin/sed
ac_cv_path_TEST=/usr/bin/test
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_AWK=gawk
ac_cv_prog_make_make_set=yes
ac_cv_target=x86_64-unknown-linux-gnu
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='${SHELL} /home/ankush/tomcat-connectors-1.2.26-src/native/scripts/build/unix/missing --run aclocal-1.9'
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR='${SHELL} /home/ankush/tomcat-connectors-1.2.26-src/native/scripts/build/unix/missing --run tar'
APACHE20_OEXT=''
APACHE_CONFIG_VARS='/home/ankush/tomcat-connectors-1.2.26-src/native/scripts/build/config_vars.mk'
APACHE_DIR=''
APXS='/usr/sbin/apxs'
APXSCFLAGS=''
APXSCPPFLAGS=''
APXSLDFLAGS='-arch x86_64'
AR=''
AWK='gawk'
CC=''
CCDEPMODE=''
CFLAGS='-arch x86_64'
CP='/bin/cp'
CPP=''
CPPFLAGS=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR=''
ECHO='/bin/echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
F77=''
FFLAGS=''
GREP='/bin/grep'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
INSTALL_TYPE=''
JAVA_HOME=''
JK_JNI_WORKER=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_JK_TYPE=''
LN_S=''
LTLIBOBJS=''
MAKEINFO='${SHELL} /home/ankush/tomcat-connectors-1.2.26-src/native/scripts/build/unix/missing --run makeinfo'
MAKE_DYNAMIC_APACHE_FALSE=''
MAKE_DYNAMIC_APACHE_TRUE=''
MKDIR='/bin/mkdir'
OBJEXT=''
OS=''
PACKAGE='mod_jk'
PACKAGE_BUGREPORT=''
PACKAGE_NAME=''
PACKAGE_STRING=''
PACKAGE_TARNAME=''
PACKAGE_VERSION=''
PATH_SEPARATOR=':'
PERL='/usr/bin/perl'
RANLIB=''
RM='/bin/rm'
SED='/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
TEST='/usr/bin/test'
VERSION='1.2.26'
WEBSERVER=''
ac_ct_CC=''
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
apache_include=''
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='/home/ankush/tomcat-connectors-1.2.26-src/native/scripts/build/unix/install-sh'
int32_t_fmt=''
int32_value=''
int64_t_fmt=''
int64_value=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='mkdir -p --'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pid_t_fmt=''
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='x86_64-unknown-linux-gnu'
target_alias=''
target_cpu='x86_64'
target_os='linux-gnu'
target_vendor='unknown'
uint32_t_fmt=''
uint32_t_hex_fmt=''
uint64_t_fmt=''
uint64_t_hex_fmt=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""
#define PACKAGE_STRING ""
#define PACKAGE_BUGREPORT ""
#define PACKAGE "mod_jk"
#define VERSION "1.2.26"
configure: exit 1
What mistake I am making while compiling mod_jk?
Thanks & Regards
Ankush
-
ankush grover -
Farkas Levente