Message-ID: 499CC7D9.9050207@gmail.com
Date: Thu, 19 Feb 2009 08:15:45 +0530, partha chowdhury kira.laucas@gmail.com wrote:
what do /sbin/lsusb and fdisk -l show ?
[root@inet04 ~]# /sbin/lsusb Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 007 Device 001: ID 0000:0000 Bus 003 Device 002: ID 046d:c312 Logitech, Inc. Bus 003 Device 001: ID 0000:0000 Bus 006 Device 001: ID 0000:0000 Bus 008 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 004 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical [root@inet04 ~]# fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 121601 976655610 8e Linux LVM [root@inet04 ~]#
Pardon the delay but I get the digest version of the mailing list.
Based on another message respecting power to the USB key I inserted it into a port located at the back of the host and it was recognized immediately. I have no idea why it is not picked up when placed into on of the front panel usb ports but it matters not so long as I can mount it.
Thanks for the help.
On Thu, 2009-02-19 at 14:31 -0500, James B. Byrne wrote:
Based on another message respecting power to the USB key I inserted it into a port located at the back of the host and it was recognized immediately. I have no idea why it is not picked up when placed into on of the front panel usb ports but it matters not so long as I can mount it.
Check BIOIS setup and see if all the on-board usb ports are enabled. Also, front-panel ports usually have a small cable from the mainboard port to the panel connector. It may have become dislodged or be reversed if the connector is not keyed.
Thanks for the help.
HTH
At Thu, 19 Feb 2009 14:31:26 -0500 (EST) CentOS mailing list centos@centos.org wrote:
Based on another message respecting power to the USB key I inserted it into a port located at the back of the host and it was recognized immediately. I have no idea why it is not picked up when placed into on of the front panel usb ports but it matters not so long as I can mount it.
Sounds like your front panel usb ports don't have the power connections wired or maybe they are broken?
Thanks for the help.
-
James B. Byrne -
Robert Heller -
William L. Maltby