Here's an odd one: I installed apcupsd, and it works with most of our UPSs. I'd swear it worked on this one. Then I replaced the Gin-u-wine APC batteries, which were dead, with new ones, non-APC. They're just dumb batteries, no chips or whatever on them.
If I hook it up using a serial cable, I can get info. If I hook it up the way I had it, with APC's weird USB cable - and this is the way it was working before - it fails. I run apctest, and it gives me:
Attached to driver: usb sharenet.type = DISABLE cable.type = USB_CABLE
You are using a USB cable type, so I'm entering USB test mode mode.type = USB_UPS Setting up the port ... Hello, this is the apcupsd Cable Test program. This part of apctest is for testing USB UPSes.
Getting UPS capabilities...SUCCESS
Then I tell it to do the self test, and get:
This test instructs the UPS to perform a self-test operation and reports the result when the test completes.
Clearing previous self test result...CLEARED Initiating self test...INITIATED Waiting for test to complete...ERROR READING STATUS 12.976 apcupsd: linux-usb.c:802 HIDIOCGREPORT for function SelftestStatus failed. ERR=Input/output error
Now, I've even found an rpm that was *not* two+ years old, as what comes with CentOS 5.4, current update, and get the same error.
In addition, even though the batteries are fully charged, and the info I get via the serial cable says they're at 100%, the red "change battery" light is still on on the front of the UPS. Hitting the "test" button doesn't help; I was hoping running the self-test that's available via the USB connection would reset it, but I can't do that.
Any clues for the poor?
mark
m.roth@5-cent.us wrote:
Here's an odd one: I installed apcupsd, and it works with most of our UPSs. I'd swear it worked on this one. Then I replaced the Gin-u-wine APC batteries, which were dead, with new ones, non-APC. They're just dumb batteries, no chips or whatever on them.
If I hook it up using a serial cable, I can get info. If I hook it up the way I had it, with APC's weird USB cable - and this is the way it was working before - it fails. I run apctest, and it gives me:
Attached to driver: usb sharenet.type = DISABLE cable.type = USB_CABLE
You are using a USB cable type, so I'm entering USB test mode mode.type = USB_UPS Setting up the port ... Hello, this is the apcupsd Cable Test program. This part of apctest is for testing USB UPSes.
Getting UPS capabilities...SUCCESS
Then I tell it to do the self test, and get:
This test instructs the UPS to perform a self-test operation and reports the result when the test completes.
Clearing previous self test result...CLEARED Initiating self test...INITIATED Waiting for test to complete...ERROR READING STATUS 12.976 apcupsd: linux-usb.c:802 HIDIOCGREPORT for function SelftestStatus failed. ERR=Input/output error
Now, I've even found an rpm that was *not* two+ years old, as what comes with CentOS 5.4, current update, and get the same error.
In addition, even though the batteries are fully charged, and the info I get via the serial cable says they're at 100%, the red "change battery" light is still on on the front of the UPS. Hitting the "test" button doesn't help; I was hoping running the self-test that's available via the USB connection would reset it, but I can't do that.
Any clues for the poor?
mark
Funny, after reading the above, I decided to try the apcupsd with my new fancy APC with the LCD display and everything. Got very similar results. Gnome Power Manager recognizes it from the get go, just with decreased functionality. It would be nice to have Centos able to 'plug' into all of its features and diagnostics. I'm running 5.4 on a hardware raid 10 server....old Adaptec 2400A with 128 megs of cache. This machine seems to have problems with the partition managers as well. Could LVM be getting in the way somehow?
Ed
m.roth@5-cent.us wrote:
Here's an odd one: I installed apcupsd, and it works with most of our UPSs. I'd swear it worked on this one. Then I replaced the Gin-u-wine APC batteries, which were dead, with new ones, non-APC. They're just dumb batteries, no chips or whatever on them.
If I hook it up using a serial cable, I can get info. If I hook it up the way I had it, with APC's weird USB cable - and this is the way it was working before - it fails. I run apctest, and it gives me:
Attached to driver: usb sharenet.type = DISABLE cable.type = USB_CABLE
You are using a USB cable type, so I'm entering USB test mode mode.type = USB_UPS Setting up the port ... Hello, this is the apcupsd Cable Test program. This part of apctest is for testing USB UPSes.
Getting UPS capabilities...SUCCESS
Then I tell it to do the self test, and get:
This test instructs the UPS to perform a self-test operation and reports the result when the test completes.
Clearing previous self test result...CLEARED Initiating self test...INITIATED Waiting for test to complete...ERROR READING STATUS 12.976 apcupsd: linux-usb.c:802 HIDIOCGREPORT for function SelftestStatus failed. ERR=Input/output error
Now, I've even found an rpm that was *not* two+ years old, as what comes with CentOS 5.4, current update, and get the same error.
In addition, even though the batteries are fully charged, and the info I get via the serial cable says they're at 100%, the red "change battery" light is still on on the front of the UPS. Hitting the "test" button doesn't help; I was hoping running the self-test that's available via the USB connection would reset it, but I can't do that.
Any clues for the poor?
Funny, after reading the above, I decided to try the apcupsd with my new fancy APC with the LCD display and everything. Got very similar results. Gnome Power Manager recognizes it from the get go, just with decreased functionality. It would be nice to have Centos able to 'plug' into all of its features and diagnostics. I'm running 5.4 on a hardware raid 10 server....old Adaptec 2400A with 128 megs of cache. This machine seems to have problems with the partition managers as well. Could LVM be getting in the way somehow?
Nope - we're not using LVM. And apcupsd's apctest is command line.
mark
-
Ed Westphal -
m.roth＠5-cent.us