Hi,
I'm trying to disconnect some iSCSI targets, but can't seem to.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I need to disconnect all 4 of these
[root@localhost ~]# iscsiadm -m node -T 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb -p 196.34.136.200 --logout
The target is still there, even though I tell it to disconnect.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I can't delete it either: [root@localhost ~]# iscsiadm -m node --op delete --targetname 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb iscsiadm: no records found!
Restarting iscsi gives some odd errors:
[root@localhost ~]# /etc/init.d/iscsi restart Logging out of session [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging out of session [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging out of session [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging out of session [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logout of [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful Logout of [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Logout of [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Logout of [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful Stopping iSCSI daemon: iscsid dead but pid file exists [ OK ] Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260] Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) iscsiadm: Could not log into all portals. Err 19.
Interestingly, the targets which iscsi reports as not existing, does exist:
[root@localhost ~]# iscsiadm -m discovery -t sendtargets -p 192.168.2.200 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb
Is there any other way to force these disconnects, and re-connect them? The machine runs on CentOS 5.5 x64 + XEN:
[root@localhost ~]# cat /etc/redhat-release CentOS release 5.5 (Final) [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.18-194.el5xen #1 SMP Fri Apr 2 15:34:40 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux [root@localhost ~]#
On Mon, Feb 28, 2011 at 12:02 PM, Rudi Ahlers Rudi@softdux.com wrote:
Hi,
I'm trying to disconnect some iSCSI targets, but can't seem to.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I need to disconnect all 4 of these
[root@localhost ~]# iscsiadm -m node -T 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb -p 196.34.136.200 --logout
The target is still there, even though I tell it to disconnect.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I can't delete it either: [root@localhost ~]# iscsiadm -m node --op delete --targetname 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb iscsiadm: no records found!
Restarting iscsi gives some odd errors:
[root@localhost ~]# /etc/init.d/iscsi restart Logging out of session [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging out of session [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging out of session [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging out of session [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logout of [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful Logout of [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Logout of [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Logout of [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful Stopping iSCSI daemon: iscsid dead but pid file exists [ OK ] Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260] Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) iscsiadm: Could not log into all portals. Err 19.
Interestingly, the targets which iscsi reports as not existing, does exist:
[root@localhost ~]# iscsiadm -m discovery -t sendtargets -p 192.168.2.200 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb
Is there any other way to force these disconnects, and re-connect them? The machine runs on CentOS 5.5 x64 + XEN:
[root@localhost ~]# cat /etc/redhat-release CentOS release 5.5 (Final) [root@localhost ~]# uname -a Linux localhost.localdomain 2.6.18-194.el5xen #1 SMP Fri Apr 2 15:34:40 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux [root@localhost ~]#
-- Kind Regards Rudi Ahlers SoftDux
Website: http://www.SoftDux.com Technical Blog: http://Blog.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
This is driving me nuts! Does anyone know if this is a bug, or am I doing something wrong?
I searched the RHEL bug list, but can't find anything related to this. Some other people (via google search) seems to have simila problems, but I can't see any fixes on the web.
I can logout out of all sessions, but as soon as I restart iscsi, the sessions gets restored again:
[root@localhost ~]# fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 121584 976519057+ 8e Linux LVM
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 13 104391 83 Linux /dev/sdb2 14 121584 976519057+ 8e Linux LVM
Disk /dev/sdc: 1084.4 GB, 1084480290816 bytes 255 heads, 63 sectors/track, 131847 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdc doesn't contain a valid partition table
Disk /dev/sdd: 539.7 GB, 539771273216 bytes 255 heads, 63 sectors/track, 65623 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdd1 1 65623 527116716 fd Linux raid autodetect
Disk /dev/sde: 536.8 GB, 536870912000 bytes 255 heads, 63 sectors/track, 65270 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sde doesn't contain a valid partition table
Disk /dev/sdf: 536.8 GB, 536870912000 bytes 255 heads, 63 sectors/track, 65270 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdf1 1 65270 524281243+ fd Linux raid autodetect
[root@localhost ~]# iscsiadm -m node -u Logging out of session [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging out of session [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging out of session [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging out of session [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logout of [sid: 1, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful Logout of [sid: 3, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Logout of [sid: 4, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Logout of [sid: 5, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful
So, iscsi logs out of the targets, and fdisk -l confirms it: [root@localhost ~]# fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 121584 976519057+ 8e Linux LVM
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 13 104391 83 Linux /dev/sdb2 14 121584 976519057+ 8e Linux LVM
But as soon as I restart iscsi, it logs back-in:
[root@localhost ~]# /etc/init.d/iscsi restart Stopping iSCSI daemon: iscsid dead but pid file exists [ OK ] Starting iSCSI daemon: [ OK ] [ OK ] Setting up iSCSI targets: Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260] Logging in to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260] Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:500gb, portal: 192.168.2.202,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin1.vg0.2tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba, portal: 192.168.2.200,3260]: successful Login to [iface: default, target: iqn.2011.01.22.freenas.nvr:extent0, portal: 192.168.2.202,3260]: successful Login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb, portal: 192.168.2.200,3260]: successful iscsiadm: Could not login to [iface: default, target: iqn.2011-2.za.co.securehosting:RAID.thin2.vg0.1tb, portal: 192.168.2.200,3260]: iscsiadm: initiator reported error (19 - encountered non-retryable iSCSI login failure) iscsiadm: Could not log into all portals. Err 19.
Why? Or, how do I completely get rid of them?
On Mon, Feb 28, 2011 at 09:44, Rudi Ahlers Rudi@softdux.com wrote:
On Mon, Feb 28, 2011 at 12:02 PM, Rudi Ahlers Rudi@softdux.com wrote:
Hi,
I'm trying to disconnect some iSCSI targets, but can't seem to.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb I can't delete it either: [root@localhost ~]# iscsiadm -m node --op delete --targetname 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb iscsiadm: no records found!
I think your node names are wrong. I can logout and delete a target exactly with this two lines:
iscsiadm -m node -T iqn.1992-08.com.netapp:sn.151737287 -p 172.16.1.10 --logout iscsiadm -m node -T iqn.1992-08.com.netapp:sn.151737287 -p 172.16.1.10 -o delete
note that the parameter to -T is the string starting with iqn up to the space.
Hope this helps
-- Marcelo
"¿No será acaso que ésta vida moderna está teniendo más de moderna que de vida?" (Mafalda)
On Mon, Feb 28, 2011 at 7:26 PM, Marcelo Roccasalva marcelo-centos@irrigacion.gov.ar wrote:
On Mon, Feb 28, 2011 at 09:44, Rudi Ahlers Rudi@softdux.com wrote:
On Mon, Feb 28, 2011 at 12:02 PM, Rudi Ahlers Rudi@softdux.com wrote:
Hi,
I'm trying to disconnect some iSCSI targets, but can't seem to.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb I can't delete it either: [root@localhost ~]# iscsiadm -m node --op delete --targetname 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb iscsiadm: no records found!
I think your node names are wrong. I can logout and delete a target exactly with this two lines:
iscsiadm -m node -T iqn.1992-08.com.netapp:sn.151737287 -p 172.16.1.10 --logout iscsiadm -m node -T iqn.1992-08.com.netapp:sn.151737287 -p 172.16.1.10 -o delete
note that the parameter to -T is the string starting with iqn up to the space.
Hope this helps
--
I don't understand, how are the node names wrong? They're get wrapped in this email though, but those are setup on the SAN device and I don't have much control over them, other than the date (i.e. 2011.01.22) the ".freenas.nvr" gets edded automatically ( that's the server's name) and then I need to specify a unique name to the target itself (i.e. the "500gb") - from "2011.01.22.freenas.nvr:500gb"
on 12:02 Mon 28 Feb, Rudi Ahlers (Rudi@SoftDux.com) wrote:
Hi,
I'm trying to disconnect some iSCSI targets, but can't seem to.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I need to disconnect all 4 of these
[root@localhost ~]# iscsiadm -m node -T 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb -p 196.34.136.200 --logout
That's a logout to a specific node and dataport. If you're wrong about the IQN and/or dataport, it's not going to work.
I think you want:
iscsiadm -m node -u
And for good measure:
iscsiadm -m session -u
If you do want to delete specific discovery records and need to identify the dataport associated with them:
iscsiadm -m discoverydb
... will print them.
The target is still there, even though I tell it to disconnect.
[root@localhost ~]# iscsiadm -m session tcp: [1] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb tcp: [3] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.thin3.vg0.1tba tcp: [4] 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:extent0 tcp: [5] 192.168.2.200:3260,1 iqn.2011-2.za.co.securehosting:RAID.iscsi0.vg0.500gb
I can't delete it either: [root@localhost ~]# iscsiadm -m node --op delete --targetname 192.168.2.202:3260,1 iqn.2011.01.22.freenas.nvr:500gb iscsiadm: no records found!
Restarting iscsi gives some odd errors:
If you're going to that extent, you can umount all remote targets, disable iscsid and iscsi services, reboot, and clear out the various entries under /var/lib/iscsi/. Leave the directories (/var/lib/iscsi/*/), but remove the files beneath them.
Note that this is a bit like doing brain surgery with a sledgehammer. Lacking in finess, but for some jobs, effective.
You might also try posting to the open-iscsi mailing list. I've found that iscsi is very tempermental and poorly understood by most.
-
Dr. Ed Morbius -
Marcelo Roccasalva -
Rudi Ahlers