Hi,
I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get:
$mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only
The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263
Here is my mtab:
$ cat /etc/mtab
/dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/shm tmpfs rw 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0 /dev/hdc /media/cdrecorder iso9660 ro,nosuid,nodev,user=froggy 0 0
How do I change /dev/hdc /media/cdrecorder iso9660 ro to rw?
$ cat /etc/fstab
# This file is edited by fstab-sync - see 'man fstab-sync' for details /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 /dev/hdc /media/cdrecorder auto pamconsole,exec,noauto,managed 0 0
Am Mi, den 15.06.2005 schrieb centos@911networks.com um 23:48:
I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get:
$mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only
What do you try to mount?
The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263
Here is my mtab:
$ cat /etc/mtab
/dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/shm tmpfs rw 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0 /dev/hdc /media/cdrecorder iso9660 ro,nosuid,nodev,user=froggy 0 0
Looks good.
How do I change /dev/hdc /media/cdrecorder iso9660 ro to rw?
You can't. This is a misconception.
Use cdrecord or if you prefer a GUI use k3b for CD-R/CD-RW burning.
Alexander
On Thu, 2005-06-16 at 00:03 +0200, Alexander Dalloz wrote:
Am Mi, den 15.06.2005 schrieb centos@911networks.com um 23:48:
How do I change /dev/hdc /media/cdrecorder iso9660 ro to rw?
You can't. This is a misconception.
Use cdrecord or if you prefer a GUI use k3b for CD-R/CD-RW burning.
Or graveman from CentOS Extras if you prefer a GTK+-based GUI solution.
Hi Alexander Dalloz ,
Wednesday, June 15, 2005, 3:03:20 PM, you wrote:
Am Mi, den 15.06.2005 schrieb centos@911networks.com um 23:48:
I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get:
$mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only
What do you try to mount?
Because if not, it does not recognize that there is a CD in the drive. If I mount it, then I can read the CD.
The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263
Here is my mtab:
$ cat /etc/mtab
/dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/shm tmpfs rw 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0 /dev/hdc /media/cdrecorder iso9660 ro,nosuid,nodev,user=froggy 0 0
Looks good.
How do I change /dev/hdc /media/cdrecorder iso9660 ro to rw?
You can't. This is a misconception.
Use cdrecord or if you prefer a GUI use k3b for CD-R/CD-RW burning.
I do and get the following message:
Reload rewritable or blank media. Please replace the in-drive media by a rewritable or blank media
I know that the CD-RW media is good, I have Centos 4 on another computer and it works properly there.
On Wed, 2005-06-15 at 17:48 -0700, centos@911networks.com wrote:
Hi Alexander Dalloz ,
Wednesday, June 15, 2005, 3:03:20 PM, you wrote:
Am Mi, den 15.06.2005 schrieb centos@911networks.com um 23:48:
I have just installed 4.1 on a new Dell Latitude d610. It does not automount the CDs. When I mount the CD manually I get:
$mount /media/cdrecorder mount: block device /dev/hdc is write-protected, mounting read-only
What do you try to mount?
Because if not, it does not recognize that there is a CD in the drive. If I mount it, then I can read the CD.
The CD writer is an Philips IDE: CDRW/DVD-ROM CDD5263
Here is my mtab:
$ cat /etc/mtab
/dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0 none /proc proc rw 0 0 none /sys sysfs rw 0 0 none /dev/pts devpts rw,gid=5,mode=620 0 0 usbfs /proc/bus/usb usbfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/shm tmpfs rw 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0 /dev/hdc /media/cdrecorder iso9660 ro,nosuid,nodev,user=froggy 0 0
Looks good.
How do I change /dev/hdc /media/cdrecorder iso9660 ro to rw?
You can't. This is a misconception.
Use cdrecord or if you prefer a GUI use k3b for CD-R/CD-RW burning.
I do and get the following message:
Reload rewritable or blank media. Please replace the in-drive media by a rewritable or blank media
I know that the CD-RW media is good, I have Centos 4 on another computer and it works properly there.
You don't mount CD-RW's to write to them ... you use a special program like cdrecord or k3b to write to the CD-RWs.
You use the program mkisofs to create ISO files and then cdrecord or k3b to write the ISO files
You mount CDs to read them.
-
Alexander Dalloz -
centos＠911networks.com -
Ignacio Vazquez-Abrams -
Johnny Hughes