Afraid not, no /proc/net/bonding either. This is all I can see:
[root@inbfop03 ~]# find / -name bonding 2>/dev/null /lib/modules/2.6.18-194.32.1.el5/kernel/drivers/net/bonding /lib/modules/2.6.18-194.el5/kernel/drivers/net/bonding /usr/src/kernels/2.6.18-194.el5-x86_64/drivers/net/bonding /usr/src/kernels/2.6.18-194.32.1.el5-x86_64/drivers/net/bonding [root@inbfop03 ~]# find / -name bond0 2>/dev/null /sys/class/net/bond0 /proc/sys/net/ipv6/conf/bond0 /proc/sys/net/ipv6/neigh/bond0 /proc/sys/net/ipv4/conf/bond0 /proc/sys/net/ipv4/neigh/bond0 /proc/net/dev_snmp6/bond0
It's not really a problem as it's working OK, just odd it's not there.
--Russell
-----Original Message----- From: Steve Thompson [mailto:smt@vgersoft.com] Sent: Monday, 17 January 2011 2:13 p.m. To: Smithies, Russell Subject: Re: [CentOS] nic bonding
On Mon, 17 Jan 2011, Smithies, Russell wrote:
I've just setup nic bonding on our server (DL585-G7 running Centos
5.5
x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be
a
/proc/net/bond0/info
That would be /proc/net/bonding/bond0
-steve
======================================================================= Attention: The information contained in this message and/or attachments from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by AgResearch Limited. If you have received this message in error, please notify the sender immediately. =======================================================================
Greetings,
do updatedb Please locate the <something>bonding.txt in the installation
go through the procedure
You need to modprobe bonding (with mii settings) you need to manually create the bond0 files you need to edit ethx interfaces to enslave them to the bonding master you need to configure the ports in a managed switch to accomodate bonded interface ports.
Don't expect n x speed (where n is the number of NICs bonded).
HTH
Regards,
Rjagopal
On 1/17/11, Smithies, Russell Russell.Smithies@agresearch.co.nz wrote:
Afraid not, no /proc/net/bonding either. This is all I can see:
[root@inbfop03 ~]# find / -name bonding 2>/dev/null /lib/modules/2.6.18-194.32.1.el5/kernel/drivers/net/bonding /lib/modules/2.6.18-194.el5/kernel/drivers/net/bonding /usr/src/kernels/2.6.18-194.el5-x86_64/drivers/net/bonding /usr/src/kernels/2.6.18-194.32.1.el5-x86_64/drivers/net/bonding [root@inbfop03 ~]# find / -name bond0 2>/dev/null /sys/class/net/bond0 /proc/sys/net/ipv6/conf/bond0 /proc/sys/net/ipv6/neigh/bond0 /proc/sys/net/ipv4/conf/bond0 /proc/sys/net/ipv4/neigh/bond0 /proc/net/dev_snmp6/bond0
It's not really a problem as it's working OK, just odd it's not there.
--Russell
-----Original Message----- From: Steve Thompson [mailto:smt@vgersoft.com] Sent: Monday, 17 January 2011 2:13 p.m. To: Smithies, Russell Subject: Re: [CentOS] nic bonding
On Mon, 17 Jan 2011, Smithies, Russell wrote:
I've just setup nic bonding on our server (DL585-G7 running Centos
5.5
x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all seems fine but from other "howto's" I've seen on the web, they're should be
a
/proc/net/bond0/info
That would be /proc/net/bonding/bond0
-steve
======================================================================= Attention: The information contained in this message and/or attachments from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by AgResearch Limited. If you have received this message in error, please notify the sender immediately. ======================================================================= _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Sorry, I'm not sure I understand your comments. I understand what bonding is and how it works and ours is working fine. Just not sure why I don't have any /proc/net/bond* files
--Russell
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Rajagopal Swaminathan Sent: Monday, 17 January 2011 4:31 p.m. To: CentOS mailing list Subject: Re: [CentOS] nic bonding
Greetings,
do updatedb Please locate the <something>bonding.txt in the installation
go through the procedure
You need to modprobe bonding (with mii settings) you need to manually create the bond0 files you need to edit ethx interfaces to enslave them to the bonding master you need to configure the ports in a managed switch to accomodate bonded interface ports.
Don't expect n x speed (where n is the number of NICs bonded).
HTH
Regards,
Rjagopal
On 1/17/11, Smithies, Russell Russell.Smithies@agresearch.co.nz wrote:
Afraid not, no /proc/net/bonding either. This is all I can see:
[root@inbfop03 ~]# find / -name bonding 2>/dev/null /lib/modules/2.6.18-194.32.1.el5/kernel/drivers/net/bonding /lib/modules/2.6.18-194.el5/kernel/drivers/net/bonding /usr/src/kernels/2.6.18-194.el5-x86_64/drivers/net/bonding /usr/src/kernels/2.6.18-194.32.1.el5-x86_64/drivers/net/bonding [root@inbfop03 ~]# find / -name bond0 2>/dev/null /sys/class/net/bond0 /proc/sys/net/ipv6/conf/bond0 /proc/sys/net/ipv6/neigh/bond0 /proc/sys/net/ipv4/conf/bond0 /proc/sys/net/ipv4/neigh/bond0 /proc/net/dev_snmp6/bond0
It's not really a problem as it's working OK, just odd it's not
there.
--Russell
-----Original Message----- From: Steve Thompson [mailto:smt@vgersoft.com] Sent: Monday, 17 January 2011 2:13 p.m. To: Smithies, Russell Subject: Re: [CentOS] nic bonding
On Mon, 17 Jan 2011, Smithies, Russell wrote:
I've just setup nic bonding on our server (DL585-G7 running Centos
5.5
x86_64) as detailed on the wiki: http://wiki.centos.org/TipsAndTricks/BondingInterfaces and all
seems
fine but from other "howto's" I've seen on the web, they're should
be
a
/proc/net/bond0/info
That would be /proc/net/bonding/bond0
-steve
=======================================================================
Attention: The information contained in this message and/or
attachments
from AgResearch Limited is intended only for the persons or entities to which it is addressed and may contain confidential and/or
privileged
material. Any review, retransmission, dissemination or other use of,
or
taking of any action in reliance upon, this information by persons or entities other than the intended recipients is prohibited by
AgResearch
Limited. If you have received this message in error, please notify
the
sender immediately.
=======================================================================
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
Rajagopal Swaminathan -
Smithies, Russell