When I try to burn anything to cd, I get a message to insert a CD large enough for my file (normally an ISO image). Doesn't matter if the iso image is a 600Mb Centos ISO or a 48Mb DSL ISO. Same warning.
My CD-Rs are Memorex 700MB/80min 52x disks that work just fine on XP systems.
So what am I missing configuration-wise?
On Tue, 25 Dec 2007 07:30:51 -0500 Robert Moskowitz rgm@htt-consult.com wrote:
So what am I missing configuration-wise?
Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.)
Frank Cox wrote:
On Tue, 25 Dec 2007 07:30:51 -0500 Robert Moskowitz rgm@htt-consult.com wrote:
So what am I missing configuration-wise?
Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.)
No it does not.
It prompts me for media, even if I preload the disk before start k3b. If I 'force' I get a failure and this is the details (I see a message in the gui error window about using TAO?):
System ----------------------- K3b Version: 0.12.17
KDE Version: 3.5.4-13.el5.centos CentOS QT Version: 3.3.6 Kernel: 2.6.18-53.1.4.el5 Devices ----------------------- HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R]
COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None] Used versions ----------------------- cdrecord: 2.1
cdrecord ----------------------- scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200f' Revision : '1.0A' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.017s timeout 200s /usr/bin/cdrecord: No disk / Wrong disk! Track 01: data 528 MB Total size: 606 MB (60:05.53) = 270415 sectors Lout start: 606 MB (60:07/40) = 270415 sectors
cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data /root/CentOS-5.1-i386-bin-6of6.iso
=================================
Note that this is a USB device.
on 12/25/2007 4:39 PM Robert Moskowitz spake the following:
Frank Cox wrote:
On Tue, 25 Dec 2007 07:30:51 -0500 Robert Moskowitz rgm@htt-consult.com wrote:
So what am I missing configuration-wise?
Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.)
No it does not.
It prompts me for media, even if I preload the disk before start k3b. If I 'force' I get a failure and this is the details (I see a message in the gui error window about using TAO?):
System
K3b Version: 0.12.17
KDE Version: 3.5.4-13.el5.centos CentOS QT Version: 3.3.6 Kernel: 2.6.18-53.1.4.el5 Devices
HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R]
COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None] Used versions
cdrecord: 2.1
cdrecord
scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200f' Revision : '1.0A' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.017s timeout 200s /usr/bin/cdrecord: No disk / Wrong disk! Track 01: data 528 MB Total size: 606 MB (60:05.53) = 270415 sectors Lout start: 606 MB (60:07/40) = 270415 sectors
cdrecord command:
/usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data /root/CentOS-5.1-i386-bin-6of6.iso
=================================
Note that this is a USB device.
I had an old drive like that that I had to retire as it wouldn't accept any newer disks. I saw mention of XP systems. Do those disks work in that drive running under windows?
Scott Silva wrote:
on 12/25/2007 4:39 PM Robert Moskowitz spake the following:
Frank Cox wrote:
On Tue, 25 Dec 2007 07:30:51 -0500 Robert Moskowitz rgm@htt-consult.com wrote:
So what am I missing configuration-wise?
Does k3b work? (You can use k3b on a Gnome system -- I do it all the time.)
No it does not.
It prompts me for media, even if I preload the disk before start k3b. If I 'force' I get a failure and this is the details (I see a message in the gui error window about using TAO?):
System
K3b Version: 0.12.17
KDE Version: 3.5.4-13.el5.centos CentOS QT Version: 3.3.6 Kernel: 2.6.18-53.1.4.el5 Devices
HP CD-Writer+ 8200f 1.0A (/dev/scd0, ) at [CD-R; CD-RW; CD-ROM] [Error] [SAO; TAO; RAW; SAO/R96R; RAW/R16; RAW/R96R]
COMPAQ CD-ROM CRN-8241B 2.23 (/dev/hdc, ) at [CD-ROM] [Error] [None] Used versions
cdrecord: 2.1
cdrecord
scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'HP ' Identifikation : 'CD-Writer+ 8200f' Revision : '1.0A' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.017s timeout 200s /usr/bin/cdrecord: No disk / Wrong disk! Track 01: data 528 MB Total size: 606 MB (60:05.53) = 270415 sectors Lout start: 606 MB (60:07/40) = 270415 sectors
cdrecord command:
/usr/bin/cdrecord -v gracetime=2 dev=/dev/scd0 speed=4 -dao -eject -data /root/CentOS-5.1-i386-bin-6of6.iso
=================================
Note that this is a USB device.
I had an old drive like that that I had to retire as it wouldn't accept any newer disks. I saw mention of XP systems. Do those disks work in that drive running under windows?
The drive was used on a Win2000 system. disks it burned have been used in:
Win98 Win2000 XP many Linux variants CD audio and video players
So the disk it made were not at issue.
Though perhaps only Win2000 systems can handle this? hmm should go put it on the DSL system. DSL has stayed with the 2.4 kernel to keep old hardware running. Or so Roberts states...
-
Frank Cox -
Robert Moskowitz -
Scott Silva