I am currently using Virtual PC 2007 to install/configure CentOS 4.5. I've got the O/S installed ok.
However since running a yum update, I can no longer successfully complete an init 5 boot. Virtual PC gives an internal error 13 message.
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and run 'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to init 5.
Anyone seen this before and can offer any assistance?
TIA, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ===========================================================
************************************************************************ The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Walker Martyn Ltd or any of its affiliates. If you are not the intended recipient please contact administrator@walkermartyn.co.uk
Walker Martyn Ltd, company number SC197533. Company is registered in Scotland and has its registered office at 1 Park Circus Place, Glasgow G3 6AH, UK. ****************************************************************
On 8/10/07, Robert Jackson rab@walkermartyn.co.uk wrote:
I am currently using Virtual PC 2007 to install/configure CentOS 4.5. I've got the O/S installed ok.
However since running a yum update, I can no longer successfully complete an init 5 boot. Virtual PC gives an internal error 13 message.
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and run 'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to init 5.
Anyone seen this before and can offer any assistance? Had you edited you /etc/inittab to default boot on runlevel 5?
TIA, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: * http://www.walkermartyn.co.uk* http://www.walkermartyn.co.uk ===========================================================
The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Walker Martyn Ltd or any of its affiliates. If you are not the intended recipient please contact administrator@walkermartyn.co.uk.
Walker Martyn Ltd, company number SC197533. Company is registered in Scotland and has its registered office at 1 Park Circus Place, Glasgow G3 6AH, UK.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Runlevel 5 is currently set as the default (by the install routine).
Regards, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk http://www.walkermartyn.co.uk/ ===========================================================
________________________________
From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of joseph blase Sent: Friday August 2007 13:31 To: CentOS mailing list Subject: rab@walkermartyn.co.uk - Email found in subject - Re: [CentOS] Cannot Boot XServer
On 8/10/07, Robert Jackson rab@walkermartyn.co.uk wrote:
I am currently using Virtual PC 2007 to install/configure CentOS 4.5. I've got the O/S installed ok.
However since running a yum update, I can no longer successfully complete an init 5 boot. Virtual PC gives an internal error 13 message.
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and run 'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to init 5.
Anyone seen this before and can offer any assistance?
Had you edited you /etc/inittab to default boot on runlevel 5?
TIA, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk http://www.walkermartyn.co.uk ===========================================================
************************************************************************
The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Walker Martyn Ltd or any of its affiliates. If you are not the intended recipient please contact administrator@walkermartyn.co.uk.
Walker Martyn Ltd, company number SC197533. Company is registered in Scotland and has its registered office at 1 Park Circus Place, Glasgow G3 6AH, UK.
****************************************************************
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Robert Jackson spake the following on 8/10/2007 5:43 AM:
Runlevel 5 is currently set as the default (by the install routine).
Regards, Rab.
Can you set your html e-mails to a smaller font? I can still read this one. ;-P
On Fri, Aug 10, 2007 at 02:21:08PM -0700, Scott Silva enlightened us:
Robert Jackson spake the following on 8/10/2007 5:43 AM:
Runlevel 5 is currently set as the default (by the install routine).
Regards, Rab.
Can you set your html e-mails to a smaller font? I can still read this one. ;-P
You read e-mails in html?
Matt Hyclak spake the following on 8/10/2007 2:23 PM:
On Fri, Aug 10, 2007 at 02:21:08PM -0700, Scott Silva enlightened us:
Robert Jackson spake the following on 8/10/2007 5:43 AM:
Runlevel 5 is currently set as the default (by the install routine).
Regards, Rab.
Can you set your html e-mails to a smaller font? I can still read this one. ;-P
You read e-mails in html?
Not usually, but thunderbird opened this one that way
On Friday 10 August 2007 14:28:20 Robert Jackson wrote:
I am currently using Virtual PC 2007 to install/configure CentOS 4.5. I've got the O/S installed ok.
However since running a yum update, I can no longer successfully complete an init 5 boot. Virtual PC gives an internal error 13 message.
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and run 'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to init 5.
Anyone seen this before and can offer any assistance?
Would you paste the logs somwhere please?
regards,
Unfortunately I don't have a website that I can upload the log file to. As it is a large file, I decided not to paste it into my original email.
Regards, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ===========================================================
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Tomasz Napierala Sent: Friday August 2007 13:34 To: CentOS mailing list Subject: rab@walkermartyn.co.uk - Bayesian Filter detected spam - Re: [CentOS] Cannot Boot XServer
On Friday 10 August 2007 14:28:20 Robert Jackson wrote:
I am currently using Virtual PC 2007 to install/configure CentOS 4.5.
I've
got the O/S installed ok.
However since running a yum update, I can no longer successfully
complete
an init 5 boot. Virtual PC gives an internal error 13 message.
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and
run
'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to
init 5.
Anyone seen this before and can offer any assistance?
Would you paste the logs somwhere please?
regards,
On Friday 10 August 2007 14:45:19 Robert Jackson wrote:
Unfortunately I don't have a website that I can upload the log file to. As it is a large file, I decided not to paste it into my original email.
You can use http://pastebin.com
Regards,
I've posted the contents of the /var/log/Xorg.0.log file at:
http://rabjac.pastebin.com/m47edf52c
Regards, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ===========================================================
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Tomasz Napierala Sent: Friday August 2007 13:49 To: CentOS mailing list Subject: rab@walkermartyn.co.uk - Bayesian Filter detected spam - Re: [CentOS] RE: Cannot Boot XServer
On Friday 10 August 2007 14:45:19 Robert Jackson wrote:
Unfortunately I don't have a website that I can upload the log file
to.
As it is a large file, I decided not to paste it into my original email.
You can use http://pastebin.com
Regards,
Anyone?
Regards, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ===========================================================
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Robert Jackson Sent: Friday August 2007 14:01 To: CentOS mailing list Subject: rab@walkermartyn.co.uk - Email found in subject - [CentOS] RE: Cannot Boot XServer
I've posted the contents of the /var/log/Xorg.0.log file at:
http://rabjac.pastebin.com/m47edf52c
Regards, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk ===========================================================
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Tomasz Napierala Sent: Friday August 2007 13:49 To: CentOS mailing list Subject: rab@walkermartyn.co.uk - Bayesian Filter detected spam - Re: [CentOS] RE: Cannot Boot XServer
On Friday 10 August 2007 14:45:19 Robert Jackson wrote:
Unfortunately I don't have a website that I can upload the log file
to.
As it is a large file, I decided not to paste it into my original email.
You can use http://pastebin.com
Regards,
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Robert Jackson Sent: Friday, August 10, 2007 8:28 AM To: centos@centos.org Subject: [CentOS] Cannot Boot XServer
I am currently using Virtual PC 2007 to install/configure CentOS 4.5. I've got the O/S installed ok.
However since running a yum update, I can no longer successfully complete an init 5 boot. Virtual PC gives an internal error 13 message.
Did ya re-compile the VM Additions for Linux after doing a yum update?
If a new kernel was installed you'll need new VM Additions drivers!
If I boot to init 3, I can reconfigure the /etc/X11/xorg.conf file and run 'startx' manually without any problems.
If I then shutdown the Virtual PC and restart, it will not boot to init 5.
Anyone seen this before and can offer any assistance?
TIA, Rab. =========================================================== Robert Jackson Phone: +44 (0) 141 332 7999 Software Engineer Fax: +44 (0) 141 331 2820 Walker Martyn Ltd 1 Park Circus Place Email: rab@walkermartyn.co.uk Glasgow G3 6AH, Scotland Web: http://www.walkermartyn.co.uk http://www.walkermartyn.co.uk ===========================================================
The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Walker Martyn Ltd or any of its affiliates. If you are not the intended recipient please contact administrator@walkermartyn.co.uk.
Walker Martyn Ltd, company number SC197533. Company is registered in Scotland and has its registered office at 1 Park Circus Place, Glasgow G3 6AH, UK.
______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
-
joseph blase -
Matt Hyclak -
Robert Jackson -
Ross S. W. Walker -
Scott Silva -
Tomasz Napierała