Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message.
¿Any help on how I can configure correctly this ethernet device?
This are the data that I have:
# lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports at a000 [size=256] Memory at e1000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
ArcosCom Linux User wrote:
Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message.
¿Any help on how I can configure correctly this ethernet device?
Hi ArcosCom,
We have a few boxes with this chip (running CentOS4,i386), and I'm sorry to say that this NIC is not supported out of the box by the included drivers.
We've got it running by using the 'r1000' driver, which seems to be Realteks own driver. I'll be happy to make the archive we have (v1.05) available to you if you don't find a more recent version on your own.
Yours, -S
This are the data that I have:
# lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports at a000 [size=256] Memory at e1000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Fri, Dec 28, 2007 at 05:54:02PM +0100, ArcosCom Linux User wrote:
Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message.
On my (older) Gigabyte board with a Realtek 8169 chip I see this in "lspci -v":
01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology GA-8I915ME-G Mainboard Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 209 I/O ports at 9400 [size=256] Memory at e7000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 50020000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2
and "lspci -vv" shows this:
01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology GA-8I915ME-G Mainboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 209 Region 0: I/O ports at 9400 [size=256] Region 1: Memory at e7000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 50020000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I note that mine does NOT list it (as yours does) as "RTL-8110SC/8169SC", but rather as "RTL-8169", so it may not be the identical chip.
I don't have any gigabit networking in the house, but it works fine (and always has) at 10 or 100 (I've done both, currently 100).
BTW, I'm using Centos 5 fully updated.
¿Any help on how I can configure correctly this ethernet device?
This are the data that I have:
# lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports at a000 [size=256] Memory at e1000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Fri, 2007-12-28 at 17:54 +0100, ArcosCom Linux User wrote:
Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message.
¿Any help on how I can configure correctly this ethernet device?
Have you tested with the driver disk provided here : http://wiki.centos.org/HardwareList/CentOS5/RealTek/r1000 ?
Thanks to all.
I tried this:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&...
And works now.
Regards
El Vie, 28 de Diciembre de 2007, 17:54, ArcosCom Linux User escribió:
Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process.
I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message.
¿Any help on how I can configure correctly this ethernet device?
This are the data that I have:
# lspci 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
More detailed: 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) Subsystem: Giga-byte Technology Unknown device e000 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10 I/O ports at a000 [size=256] Memory at e1000000 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 20000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
ArcosCom Linux User -
Fabian Arrotin -
fred smith -
Simen Timian Thoresen