I need to add persistent routes to a policy routing table. I can add rules to an IP policy table after installing NetworkManager-config- routing-rules; but I have not found how to add routes to a table other than the specific table.
Manually I do a: ip route add default via 192.168.1.6 dev ens192 table pods
Rules load automatically via the /etc/sysconfig/network-scripts/rules- {interface} files. Routes added to /etc/sysconfig/network- scripts/routes-{interface} are always added to the default policy.
[root@aqueduct rc.d]# ip rule 0: from all lookup local 32763: from 192.168.65.0/24 lookup pods 32764: from 192.168.41.0/24 lookup pods 32765: from 192.168.43.0/24 lookup pods 32766: from all lookup main 32767: from all lookup default
Once upon a time, Adam Tauno Williams awilliam@whitemice.org said:
Rules load automatically via the /etc/sysconfig/network-scripts/rules- {interface} files. Routes added to /etc/sysconfig/network- scripts/routes-{interface} are always added to the default policy.
What are you putting in the routes-<if> file? I just put something like:
table 200 default via 192.168.41.1 dev eth1
On Tue, 2018-05-15 at 13:04 -0500, Chris Adams wrote:
Once upon a time, Adam Tauno Williams awilliam@whitemice.org said:
Rules load automatically via the /etc/sysconfig/network- scripts/rules- {interface} files. Routes added to /etc/sysconfig/network- scripts/routes-{interface} are always added to the default policy.
What are you putting in the routes-<if> file? I just put something like: table 200 default via 192.168.41.1 dev eth1
My route-ens192 file looks like -
... ADDRESS20=192.168.10.0 NETMASK20=255.255.255.0 GATEWAY20=192.168.1.6 METRIC20=0 ADDRESS21=192.168.40.0 NETMASK21=255.255.255.0 GATEWAY21=192.168.1.6 METRIC21=0 ...
Adding a ^table line doesn't do anything.
Once upon a time, Adam Tauno Williams awilliam@whitemice.org said:
On Tue, 2018-05-15 at 13:04 -0500, Chris Adams wrote:
Once upon a time, Adam Tauno Williams awilliam@whitemice.org said:
Rules load automatically via the /etc/sysconfig/network- scripts/rules- {interface} files. Routes added to /etc/sysconfig/network- scripts/routes-{interface} are always added to the default policy.
What are you putting in the routes-<if> file? I just put something like: table 200 default via 192.168.41.1 dev eth1
My route-ens192 file looks like -
... ADDRESS20=192.168.10.0 NETMASK20=255.255.255.0 GATEWAY20=192.168.1.6 METRIC20=0 ADDRESS21=192.168.40.0 NETMASK21=255.255.255.0 GATEWAY21=192.168.1.6 METRIC21=0 ...
Adding a ^table line doesn't do anything.
You can't mix and match the two styles of route file entries, and IIRC the only way to set a "table" is with the type I posted. So, you'd have to replace the contents of the file like:
table 123 192.168.10.0/24 via 192.168.1.6 dev eth1 table 123 192.168.40.0/24 via 192.168.1.6 dev eth1
and so on. Each line in the file is all the arguments to "ip route add" for a single entry.
-
Adam Tauno Williams -
Chris Adams