Hi,
The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
/usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/
Device: DELL PERC H700 Version: 2.10
DELL PERC controllers are not supported.
Any clue to the above issue?
Regards,
Kaushal
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/
Device: DELL PERC H700 Version: 2.10
DELL PERC controllers are not supported.
A newer version of smartmontools does. E.g. the one that comes with CentOS6.
On Thu, Jul 26, 2012 at 6:22 PM, Lars Hecking lhecking@users.sourceforge.net wrote:
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/
Device: DELL PERC H700 Version: 2.10
DELL PERC controllers are not supported.
A newer version of smartmontools does. E.g. the one that comes with CentOS6.
Lars Hecking,
Is it available for CentOS 5.8?
Regards,
Kaushal
DELL PERC controllers are not supported.
A newer version of smartmontools does. E.g. the one that comes with CentOS6.
Lars Hecking,
Is it available for CentOS 5.8?
Not to my knowledge. The CentOS6 SRPM may build on CentOS5, or you could try and roll your own based on the CentOS5 SRPM and latest smartmontools from SourceForge.
-
Kaushal Shriyan -
Lars Hecking