segfaults with 8 gig of ram

List overview All Threads
Download

newer

older

RE: [CentOS] Tape drive...

Cups issue - keeps re-writing...

tblader

22 Mar 2007 22 Mar '07

12:27 p.m.

Hello All. I have five Centos 4.4 x86_64 (amd fx-62) boxes with 4 gig of Corsair dual channel ram running kernel 2.6.9-42.0.10.EL (smp).

The sixth box is the same except for video card and ram. It is using 8gig of GSkill dual channel ram and has a very cheap ATI video card in it. This box will segfault on boot unless I use noapic acpi=off and nolapic. Even with these boot params, the box is not 100% stable. I have seen udev segfault right when booting and also when copying 15 meg files from /tmp to /usr will lock things up sometimes. Yum and Perl have gotten corrupted as well at different times. I have 5 fans in the box to vent heat and the BIOS reports the CPU running around 90 degrees Farenheit when rebooting.

I have run memtest86 (from Knoppix 5.1) all night long on the 8 gig of ram and it comes up OK. In the past, we have found problematic Corsair ram this way. This 8 gig seems to be OK as far as memtest thinks.

Today I will begin removing ram and testing to see what happens. Does anyone have some ideas what might be the problem? All the other five boxes with Corsair ram work fine.

Thanks

Show replies by date

William Warren

22 Mar 22 Mar

1:04 p.m.

on the unstable machine..what mobo, cpu, nic, vid, hdd, etc etc etc.

tblader wrote:

...

Hello All. I have five Centos 4.4 x86_64 (amd fx-62) boxes with 4 gig of Corsair dual channel ram running kernel 2.6.9-42.0.10.EL (smp).

The sixth box is the same except for video card and ram. It is using 8gig of GSkill dual channel ram and has a very cheap ATI video card in it. This box will segfault on boot unless I use noapic acpi=off and nolapic. Even with these boot params, the box is not 100% stable. I have seen udev segfault right when booting and also when copying 15 meg files from /tmp to /usr will lock things up sometimes. Yum and Perl have gotten corrupted as well at different times. I have 5 fans in the box to vent heat and the BIOS reports the CPU running around 90 degrees Farenheit when rebooting.

I have run memtest86 (from Knoppix 5.1) all night long on the 8 gig of ram and it comes up OK. In the past, we have found problematic Corsair ram this way. This 8 gig seems to be OK as far as memtest thinks.

Today I will begin removing ram and testing to see what happens. Does anyone have some ideas what might be the problem? All the other five boxes with Corsair ram work fine.

Thanks _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

-- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/

tblader

2:30 p.m.

William Warren wrote:

...

on the unstable machine..what mobo, cpu, nic, vid, hdd, etc etc etc.

<snip>

motherboard = nvidia kn9 (Nforce 4 Ultra) cpu = amd fx-62 (socket am2) nic = nVidia Corporation CK804 Ethernet Controller hd = seagate ST380815AS cdrom = LH-20A1P-186 ps = antec sp-500 video card = asus en6200le (nvidia geforce 6200le pci-e gpu) ram = Gskill f2-6400cl6d-4gbmq (4 sticks of 2gig)

I pulled a stick of ram out today just to try something different. I think that will take the mainboard out of dual channel mode. I hocked the nvidia-bug-report.sh script off another box to get the listing. I don't have the nvidia.com video driver loaded though. listing below will show 6gig now instead of 8. Also, I have a USB-> Serial adapter to get to a serial console on the box (headless right now).

Sorry so long, but want to be thorough.

____________________________________________

Start of NVIDIA bug report log file. Please send this report, along with a description of your bug, to linux-bugs@nvidia.com.

nvidia-bug-report.sh Version: 1697347

Date: Thu Mar 22 08:10:38 CDT 2007 uname: Linux oas.localdomain 2.6.9-42.0.10.ELsmp #1 SMP Tue Feb 27 09:40:21 EST 2007 x86_64 x86_64 x86_64 GNU/Linux

____________________________________________

/proc/driver/nvidia/version does not exist

____________________________________________

/proc/driver/nvidia/registry does not exist

____________________________________________

/proc/cmdline ro root=LABEL=/ rhgb quiet noapic nolapic vga=794 console=/dev/ttyUSB0,38400 selinux=0

____________________________________________

/proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 FX-62 Dual Core Processor stepping : 2 cpu MHz : 2800.041 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext lm 3dnowext 3dnow pni cx16 bogomips : 5603.51 TLB size : 1088 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp [4] [5]

processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 FX-62 Dual Core Processor stepping : 2 cpu MHz : 2800.041 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext lm 3dnowext 3dnow pni cx16 bogomips : 5599.20 TLB size : 1088 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp [4] [5]

____________________________________________

/proc/interrupts CPU0 CPU1 0: 567760 8489 XT-PIC timer 1: 7 1 XT-PIC i8042 2: 0 0 XT-PIC cascade 5: 1 1 XT-PIC ehci_hcd 8: 0 0 XT-PIC rtc 9: 0 0 XT-PIC acpi 10: 61312 2168 XT-PIC libata, eth0 11: 34366 877 XT-PIC libata, NVidia CK804, ohci_hcd 14: 4915 89 XT-PIC ide0 NMI: 16 12 LOC: 575397 575922 ERR: 679227 MIS: 0

____________________________________________

/proc/meminfo MemTotal: 6107040 kB MemFree: 5822424 kB Buffers: 11528 kB Cached: 207024 kB SwapCached: 0 kB Active: 67804 kB Inactive: 171980 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 6107040 kB LowFree: 5822424 kB SwapTotal: 16383992 kB SwapFree: 16383992 kB Dirty: 256 kB Writeback: 0 kB Mapped: 33680 kB Slab: 18260 kB CommitLimit: 19437512 kB Committed_AS: 35420 kB PageTables: 2172 kB VmallocTotal: 536870911 kB VmallocUsed: 270540 kB VmallocChunk: 536600247 kB HugePages_Total: 0 HugePages_Free: 0 Hugepagesize: 2048 kB

____________________________________________

/proc/modules parport_pc 29569 0 - Live 0xffffffffa025e000 lp 15345 0 - Live 0xffffffffa0257000 parport 44493 2 parport_pc,lp, Live 0xffffffffa024b000 autofs4 24393 0 - Live 0xffffffffa0244000 nfs 246641 3 - Live 0xffffffffa0206000 lockd 78449 2 nfs, Live 0xffffffffa01f1000 nfs_acl 5313 1 nfs, Live 0xffffffffa01ee000 sunrpc 176441 7 nfs,lockd,nfs_acl, Live 0xffffffffa01c1000 ds 21705 0 - Live 0xffffffffa01ba000 yenta_socket 23105 0 - Live 0xffffffffa01b3000 pcmcia_core 69841 2 ds,yenta_socket, Live 0xffffffffa01a0000 ipt_REJECT 8897 1 - Live 0xffffffffa019c000 ipt_state 3393 3 - Live 0xffffffffa019a000 ip_conntrack 54297 1 ipt_state, Live 0xffffffffa018b000 iptable_filter 4673 1 - Live 0xffffffffa0188000 ip_tables 21825 3 ipt_REJECT,ipt_state,iptable_filter, Live 0xffffffffa0181000 dm_mirror 32721 0 - Live 0xffffffffa0178000 button 9313 0 - Live 0xffffffffa0174000 battery 11465 0 - Live 0xffffffffa0170000 ac 6985 0 - Live 0xffffffffa016d000 ftdi_sio 37189 1 - Live 0xffffffffa0162000 usbserial 33713 3 ftdi_sio, Live 0xffffffffa0158000 ohci_hcd 24529 0 - Live 0xffffffffa0151000 ehci_hcd 33989 0 - Live 0xffffffffa0147000 shpchp 94345 0 - Live 0xffffffffa012e000 snd_intel8x0 38921 0 - Live 0xffffffffa0123000 snd_ac97_codec 81345 1 snd_intel8x0, Live 0xffffffffa010e000 snd_pcm_oss 59896 0 - Live 0xffffffffa00fe000 snd_mixer_oss 21697 1 snd_pcm_oss, Live 0xffffffffa00f7000 snd_pcm 110409 2 snd_intel8x0,snd_pcm_oss, Live 0xffffffffa00db000 snd_timer 29001 1 snd_pcm, Live 0xffffffffa00d2000 snd_page_alloc 13265 2 snd_intel8x0,snd_pcm, Live 0xffffffffa00cd000 snd_mpu401_uart 10561 1 snd_intel8x0, Live 0xffffffffa00c9000 snd_rawmidi 29797 1 snd_mpu401_uart, Live 0xffffffffa00c0000 snd_seq_device 10829 1 snd_rawmidi, Live 0xffffffffa00bc000 snd 63497 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xffffffffa00ab000 soundcore 12641 1 snd, Live 0xffffffffa00a6000 forcedeth 26305 0 - Live 0xffffffffa009e000 floppy 66065 0 - Live 0xffffffffa008c000 ext3 138193 6 - Live 0xffffffffa0069000 jbd 69105 1 ext3, Live 0xffffffffa0057000 dm_mod 68097 14 dm_mirror, Live 0xffffffffa0045000 sata_nv 12229 2 - Live 0xffffffffa0041000 libata 78345 1 sata_nv, Live 0xffffffffa002c000 sd_mod 19393 3 - Live 0xffffffffa0026000 scsi_mod 141457 2 libata,sd_mod, Live 0xffffffffa0002000

____________________________________________

/proc/version Linux version 2.6.9-42.0.10.ELsmp (mockbuild@builder5.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Feb 27 09:40:21 EST 2007

____________________________________________

/proc/pci PCI devices found: Bus 0, device 0, function 0: Class 0580: PCI device 10de:005e (rev 163). Bus 0, device 1, function 0: Class 0601: PCI device 10de:0050 (rev 163). Bus 0, device 1, function 1: Class 0c05: PCI device 10de:0052 (rev 162). IRQ 10. Master Capable. No bursts. Min Gnt=3.Max Lat=1. I/O at 0xfc00 [0xfc1f]. I/O at 0x1c00 [0x1c3f]. I/O at 0x1c40 [0x1c7f]. Bus 0, device 2, function 0: Class 0c03: PCI device 10de:005a (rev 162). IRQ 11. Master Capable. No bursts. Min Gnt=3.Max Lat=1. Non-prefetchable 32 bit memory at 0xfe02f000 [0xfe02ffff]. Bus 0, device 2, function 1: Class 0c03: PCI device 10de:005b (rev 163). IRQ 5. Master Capable. No bursts. Min Gnt=3.Max Lat=1. Non-prefetchable 32 bit memory at 0xfeb00000 [0xfeb000ff]. Bus 0, device 4, function 0: Class 0401: PCI device 10de:0059 (rev 162). IRQ 11. Master Capable. No bursts. Min Gnt=2.Max Lat=5. I/O at 0xf000 [0xf0ff]. I/O at 0xec00 [0xecff]. Non-prefetchable 32 bit memory at 0xfe02d000 [0xfe02dfff]. Bus 0, device 6, function 0: Class 0101: PCI device 10de:0053 (rev 242). Master Capable. No bursts. Min Gnt=3.Max Lat=1. I/O at 0xe800 [0xe80f]. Bus 0, device 7, function 0: Class 0101: PCI device 10de:0054 (rev 243). IRQ 10. Master Capable. No bursts. Min Gnt=3.Max Lat=1. I/O at 0x9f0 [0x9f7]. I/O at 0xbf0 [0xbf3]. I/O at 0x970 [0x977]. I/O at 0xb70 [0xb73]. I/O at 0xd400 [0xd40f]. Non-prefetchable 32 bit memory at 0xfe02c000 [0xfe02cfff]. Bus 0, device 8, function 0: Class 0101: PCI device 10de:0055 (rev 243). IRQ 11. Master Capable. No bursts. Min Gnt=3.Max Lat=1. I/O at 0x9e0 [0x9e7]. I/O at 0xbe0 [0xbe3]. I/O at 0x960 [0x967]. I/O at 0xb60 [0xb63]. I/O at 0xc000 [0xc00f]. Non-prefetchable 32 bit memory at 0xfe02b000 [0xfe02bfff]. Bus 0, device 9, function 0: Class 0604: PCI device 10de:005c (rev 162). Master Capable. No bursts. Min Gnt=4.Max Lat=2. Bus 0, device 10, function 0: Class 0200: PCI device 10de:0057 (rev 163). IRQ 10. Master Capable. No bursts. Min Gnt=1.Max Lat=20. Non-prefetchable 32 bit memory at 0xfe02a000 [0xfe02afff]. I/O at 0xbc00 [0xbc07]. Bus 0, device 11, function 0: Class 0604: PCI device 10de:005d (rev 163). Master Capable. No bursts. Min Gnt=4. Bus 0, device 12, function 0: Class 0604: PCI device 10de:005d (rev 163). Master Capable. No bursts. Min Gnt=4. Bus 0, device 13, function 0: Class 0604: PCI device 10de:005d (rev 163). Master Capable. No bursts. Min Gnt=4. Bus 0, device 14, function 0: Class 0604: PCI device 10de:005d (rev 163). Master Capable. No bursts. Min Gnt=28. Bus 0, device 24, function 0: Class 0600: PCI device 1022:1100 (rev 0). Bus 0, device 24, function 1: Class 0600: PCI device 1022:1101 (rev 0). Bus 0, device 24, function 2: Class 0600: PCI device 1022:1102 (rev 0). Bus 0, device 24, function 3: Class 0600: PCI device 1022:1103 (rev 0). Bus 5, device 0, function 0: Class 0300: PCI device 10de:0163 (rev 161). IRQ 5. Non-prefetchable 32 bit memory at 0xfa000000 [0xfaffffff]. Prefetchable 64 bit memory at 0xd0000000 [0xdfffffff]. Non-prefetchable 64 bit memory at 0xfb000000 [0xfbffffff].

____________________________________________

/proc/iomem 00000000-0009f3ff : System RAM 0009f400-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cedff : Video ROM 000f0000-000fffff : System ROM 00100000-bffeffff : System RAM 00100000-0030e99b : Kernel code 0030e99c-004537ce : Kernel data bfff0000-bfff2fff : ACPI Non-volatile Storage bfff3000-bfffffff : ACPI Tables d0000000-dfffffff : PCI Bus #05 d0000000-dfffffff : 0000:05:00.0 e0000000-efffffff : reserved fa000000-fcffffff : PCI Bus #05 fa000000-faffffff : 0000:05:00.0 fb000000-fbffffff : 0000:05:00.0 fd800000-fd8fffff : PCI Bus #04 fd900000-fd9fffff : PCI Bus #04 fda00000-fdafffff : PCI Bus #03 fdb00000-fdbfffff : PCI Bus #03 fdc00000-fdcfffff : PCI Bus #02 fdd00000-fddfffff : PCI Bus #02 fe02a000-fe02afff : 0000:00:0a.0 fe02a000-fe02afff : forcedeth fe02b000-fe02bfff : 0000:00:08.0 fe02b000-fe02bfff : sata_nv fe02c000-fe02cfff : 0000:00:07.0 fe02c000-fe02cfff : sata_nv fe02d000-fe02dfff : 0000:00:04.0 fe02d000-fe02dfff : NVidia CK804 fe02f000-fe02ffff : 0000:00:02.0 fe02f000-fe02ffff : ohci_hcd feb00000-feb000ff : 0000:00:02.1 feb00000-feb000ff : ehci_hcd fec00000-ffffffff : reserved

____________________________________________

/proc/mtrr reg00: base=0x00000000 ( 0MB), size=2048MB: write-back, count=1 reg01: base=0x80000000 (2048MB), size=1024MB: write-back, count=1 reg02: base=0x100000000 (4096MB), size=2048MB: write-back, count=1 reg03: base=0x180000000 (6144MB), size=1024MB: write-back, count=1

____________________________________________

/etc/issue CentOS release 4.4 (Final) Kernel \r on an \m

____________________________________________

/etc/redhat-release CentOS release 4.4 (Final)

____________________________________________

/var/log/nvidia-installer.log does not exist

____________________________________________

/var/log/XFree86.0.log does not exist

____________________________________________

/var/log/Xorg.0.log

X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.9-34.0.2.EL x86_64 [ELF] Current Operating System: Linux localhost.localdomain 2.6.9-42.ELsmp #1 SMP Tue Aug 15 10:35:26 BST 2006 x86_64 Build Date: 23 August 2006 Build Host: mehak.karan.org

Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.9-42.ELsmp (buildcentos@mehak.karan.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Aug 15 10:35:26 BST 2006 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 19 12:26:16 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib64/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib64/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib64/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (++) using VT number 7

(II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 147b,1c28 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0050 card 147b,1c28 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 147b,1c28 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 147b,1c28 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 147b,1c28 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 147b,1c28 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 147b,1c28 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 147b,1c28 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 147b,1c28 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0056 card 147b,1c28 rev a3 class 02,00,00 hdr 00 (II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:00:0: chip 10de,0163 card 1043,8205 rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B] [1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B] [2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B] [3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B] [1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B] [2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B] [3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xfdc00000 - 0xfdcfffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x00008000 - 0x000080ff (0x100) IX[B] [1] -1 0 0x00008400 - 0x000084ff (0x100) IX[B] [2] -1 0 0x00008800 - 0x000088ff (0x100) IX[B] [3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xfdb00000 - 0xfdbfffff (0x100000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0xfda00000 - 0xfdafffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 4 I/O range: [0] -1 0 0x00007000 - 0x000070ff (0x100) IX[B] [1] -1 0 0x00007400 - 0x000074ff (0x100) IX[B] [2] -1 0 0x00007800 - 0x000078ff (0x100) IX[B] [3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B] (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xfd900000 - 0xfd9fffff (0x100000) MX[B] (II) Bus 4 prefetchable memory range: [0] -1 0 0xfd800000 - 0xfd8fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x001c (VGA_EN is set) (II) Bus 5 I/O range: [0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] [1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B] [2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B] [3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B] (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[B] (II) Bus 5 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(5:0:0) nVidia Corporation unknown chipset (0x0163) rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [1] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [2] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [3] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [6] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [8] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [9] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [10] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [12] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [15] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [17] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [20] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [21] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [22] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [23] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [24] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [25] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [1] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [2] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [3] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [6] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [7] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [8] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [9] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [10] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [11] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [12] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [13] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [14] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [15] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [16] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [17] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [18] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [19] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [20] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [21] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [22] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [23] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [24] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [25] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [10] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [11] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [17] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [19] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [22] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [24] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [27] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [28] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [29] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [30] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [31] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [32] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib64/modules/extensions/libdbe.a (II) Module dbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib64/modules/extensions/libextmod.a (II) Module extmod: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib64/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 6.8.2, module version = 0.0.2 ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib64/modules/extensions/libglx.a (II) Module glx: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib64/modules/extensions/libGLcore.a (II) Module GLcore: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib64/modules/extensions/librecord.a (II) Module record: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.2 (II) Loading extension RECORD (II) LoadModule: "freetype" (II) Loading /usr/X11R6/lib64/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 6.8.2, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib64/modules/fonts/libtype1.a (II) Module type1: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib64/modules/extensions/libdri.a (II) Module dri: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib64/modules/linux/libdrm.a (II) Module drm: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.2 (II) Loading extension XFree86-DRI (II) LoadModule: "vesa" (II) Loading /usr/X11R6/lib64/modules/drivers/vesa_drv.o (II) Module vesa: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 0.7 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib64/modules/input/mouse_drv.o (II) Module mouse: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) LoadModule: "kbd" (II) Loading /usr/X11R6/lib64/modules/input/kbd_drv.o (II) Module kbd: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.4 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 05:00:0 (--) Assigning device section with no busID to primary device (--) Chipset vesa found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [10] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [11] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [17] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [18] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [19] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [20] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [21] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [22] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [23] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [24] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [25] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [26] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [27] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [28] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [29] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [30] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [31] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [32] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [10] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [11] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [20] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [22] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [25] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [27] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [30] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [31] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [32] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [33] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [34] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [35] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib64/modules/libvbe.a (II) Module vbe: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.1.0 ABI class: X.Org Video Driver, version 0.7 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib64/modules/linux/libint10.a (II) Module int10: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 3.0 (II) VESA(0): VESA VBE Total Mem: 65536 kB (II) VESA(0): VESA VBE OEM: NVIDIA (II) VESA(0): VESA VBE OEM Software Rev: 5.68 (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation (II) VESA(0): VESA VBE OEM Product: nv44 Board - p262h17 (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev (**) VESA(0): Depth 24, (--) framebuffer bpp 32 (==) VESA(0): RGB weight 888 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib64/modules/libddc.a (II) Module ddc: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (II) VESA(0): VESA VBE DDC supported (II) VESA(0): VESA VBE DDC Level 2 (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. (II) VESA(0): VESA VBE DDC read successfully (II) VESA(0): Manufacturer: DEL Model: 4015 Serial#: 1111769413 (II) VESA(0): Year: 2006 Week: 8 (II) VESA(0): EDID Version: 1.3 (II) VESA(0): Digital Display Input (II) VESA(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30 (II) VESA(0): Gamma: 2.20 (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) VESA(0): Default color space is primary color space (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621 (II) VESA(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329 (II) VESA(0): Supported VESA Video Modes: (II) VESA(0): 720x400@70Hz (II) VESA(0): 640x480@60Hz (II) VESA(0): 640x480@75Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): 800x600@75Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): 1024x768@75Hz (II) VESA(0): 1280x1024@75Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) VESA(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 108.0 MHz Image Size: 376 x 301 mm (II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) VESA(0): Serial No: DC32362LBDAE (II) VESA(0): Monitor name: DELL 1907FP (II) VESA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz (II) VESA(0): Searching for matching VESA mode(s): Mode: 100 (640x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 640 XResolution: 640 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 14 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 101 (640x480) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 10 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 10 LinNumberOfImagePages: 10 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 102 (800x600) ModeAttributes: 0x31f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 100 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 4 BitsPerPixel: 4 NumberOfBanks: 1 MemoryModel: 3 BankSize: 0 NumberOfImages: 14 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 100 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 108500000 Mode: 103 (800x600) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 800 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 6 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 800 BnkNumberOfImagePages: 6 LinNumberOfImagePages: 6 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 104 (1024x768) ModeAttributes: 0x31f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 128 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 4 BitsPerPixel: 4 NumberOfBanks: 1 MemoryModel: 3 BankSize: 0 NumberOfImages: 6 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 128 BnkNumberOfImagePages: 6 LinNumberOfImagePages: 6 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 108500000 Mode: 105 (1024x768) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 3 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 106 (1280x1024) ModeAttributes: 0x31f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 160 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 4 BitsPerPixel: 4 NumberOfBanks: 1 MemoryModel: 3 BankSize: 0 NumberOfImages: 3 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 160 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 108500000 Mode: 107 (1280x1024) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 1 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 10e (320x200) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 640 XResolution: 320 YResolution: 200 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 30 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 30 LinNumberOfImagePages: 30 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 10f (320x200) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 320 YResolution: 200 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 14 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 111 (640x480) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 112 (640x480) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 114 (800x600) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 115 (800x600) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 117 (1024x768) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 118 (1024x768) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 11a (1280x1024) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 2560 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 11b (1280x1024) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 5120 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 130 (320x200) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 320 XResolution: 320 YResolution: 200 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 62 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 320 BnkNumberOfImagePages: 62 LinNumberOfImagePages: 62 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 131 (320x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 320 XResolution: 320 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 30 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 320 BnkNumberOfImagePages: 30 LinNumberOfImagePages: 30 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 132 (320x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 640 XResolution: 320 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 14 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 133 (320x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 320 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 6 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 6 LinNumberOfImagePages: 6 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 134 (320x240) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 320 XResolution: 320 YResolution: 240 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 30 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 320 BnkNumberOfImagePages: 30 LinNumberOfImagePages: 30 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 Mode: 135 (320x240) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 640 XResolution: 320 YResolution: 240 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 19 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 19 LinNumberOfImagePages: 19 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *Mode: 136 (320x240) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 320 YResolution: 240 XCharSize: 8 YCharSize: 8 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 10 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 10 LinNumberOfImagePages: 10 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000 Mode: 13d (640x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 1280 XResolution: 640 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 6 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 6 LinNumberOfImagePages: 6 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 229500000 *(II) VESA(0): Not using built-in mode "640x400" (vrefresh out of range) Mode: 13e (640x400) ModeAttributes: 0x39f WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0009f11 BytesPerScanline: 2560 XResolution: 640 YResolution: 400 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 229500000

(II) VESA(0): Total Memory: 1024 64KB banks (65536kB) (WW) VESA(0): config file vrefresh range 50-75Hz not within DDC vrefresh ranges. (II) VESA(0): Monitor0: Using hsync range of 31.50-67.00 kHz (II) VESA(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz (II) VESA(0): Not using mode "1280x960" (no mode of this name) (II) VESA(0): Not using mode "1152x864" (no mode of this name) (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): *Built-in mode "1280x1024" (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (--) VESA(0): Display dimensions: (380, 300) mm (--) VESA(0): DPI set to (85, 86) (WW) (1280x1024,Monitor0) mode clock 157.5MHz exceeds DDC maximum 140MHz (II) VESA(0): Attempting to use 60Hz refresh for mode "1280x1024" (11b) (II) VESA(0): Attempting to use 75Hz refresh for mode "1024x768" (118) (II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (115) (II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (112) (**) VESA(0): Using "Shadow Framebuffer" (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/X11R6/lib64/modules/libshadow.a (II) Module shadow: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib64/modules/libfb.a (II) Module fb: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.2 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B] [6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B] [7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B] [8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B] [9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B] [10] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[B] [11] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[B](B) [12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [13] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B] [20] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[B] [21] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B] [22] -1 0 0x00000960 - 0x00000967 (0x8) IX[B] [23] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B] [24] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B] [25] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [26] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B] [27] -1 0 0x00000970 - 0x00000977 (0x8) IX[B] [28] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B] [29] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B] [30] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B] [31] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B] [32] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B] [33] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[B] [34] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[B] [35] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[B] [36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib64/modules/linux/libint10.a (II) VESA(0): initializing int10 (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 3.0 (II) VESA(0): VESA VBE Total Mem: 65536 kB (II) VESA(0): VESA VBE OEM: NVIDIA (II) VESA(0): VESA VBE OEM Software Rev: 5.68 (II) VESA(0): VESA VBE OEM Vendor: NVIDIA Corporation (II) VESA(0): VESA VBE OEM Product: nv44 Board - p262h17 (II) VESA(0): VESA VBE OEM Product Rev: Chip Rev (==) VESA(0): Write-combining range (0xd0000000,0x4000000) (II) VESA(0): virtual address = 0x2a962a2000, physical address = 0xd0000000, size = 67108864 (==) VESA(0): Default visual is TrueColor (==) VESA(0): Backing store disabled (**) Option "dpms" (**) VESA(0): DPMS enabled (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (**) Option "Protocol" "IMPS/2" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "IMPS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "yes" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) Mouse0: ps2EnableDataReporting: succeeded

____________________________________________

/etc/X11/xorg.conf

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection

Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection

Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection

Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1280x1024" HorizSync 31.5 - 67.0 VertRefresh 50.0 - 75.0 Option "dpms" EndSection

Section "Device" Identifier "Videocard0" Driver "vesa" VendorName "Videocard vendor" BoardName "VESA driver (generic)" EndSection

Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection

Section "DRI" Group 0 Mode 0666 EndSection

____________________________________________

ldd /usr/X11R6/bin/glxinfo

libGLU.so.1 => /usr/X11R6/lib64/libGLU.so.1 (0x0000003e46c00000) libGL.so.1 => /usr/X11R6/lib64/libGL.so.1 (0x0000003e46a00000) libXext.so.6 => /usr/X11R6/lib64/libXext.so.6 (0x0000003e46800000) libX11.so.6 => /usr/X11R6/lib64/libX11.so.6 (0x0000003e46600000) libpthread.so.0 => /lib64/tls/libpthread.so.0 (0x0000003e46400000) libm.so.6 => /lib64/tls/libm.so.6 (0x0000003e45e00000) libc.so.6 => /lib64/tls/libc.so.6 (0x0000003e45b00000) libstdc++.so.6 => /usr/lib64/libstdc++.so.6 (0x0000003e48700000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x0000003e48900000) libXxf86vm.so.1 => /usr/X11R6/lib64/libXxf86vm.so.1 (0x0000003e46200000) libdl.so.2 => /lib64/libdl.so.2 (0x0000003e46000000) /lib64/ld-linux-x86-64.so.2 (0x0000003e45900000)

____________________________________________

/sbin/lspci -d "10de:*" -v -xxx

00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [e0] HyperTransport: MSI Mapping 00: de 10 5e 00 06 00 b0 00 a3 00 80 05 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 28 1c 08 e0 e0 01 22 00 11 11 d0 00 00 00 50: 23 06 7f 80 03 00 00 00 00 00 03 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 06 36 00 00 70: 44 44 00 00 d0 09 00 00 00 00 00 00 88 00 00 00 80: 13 ff 88 00 fa 00 00 00 03 00 00 00 61 00 00 00 90: 0e 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 00 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0 00: de 10 50 00 0f 00 a0 00 a3 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00 40: 7b 14 28 1c 00 f0 ff fe fa 3e ff 00 fa 3e ff 00 50: fa 3e ff 00 00 5a 62 02 00 00 00 01 00 00 ff ff 60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 f9 ff 70: 10 00 ff ff c1 00 00 00 00 00 04 19 00 05 b0 0a 80: 09 5a 00 ab 0b 0a 0b 00 c0 00 00 01 00 00 00 00 90: 00 00 00 00 00 00 00 00 21 64 87 a9 de bc 00 00 a0: 03 00 10 80 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 95 02 97 02 00 00 00 00 00 00 00 00 c0: 35 82 80 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 1c 10 01 00 00 00 50 00 80 20 00 20 61 44 44 11 f0: 5a ff 5f bf 00 00 00 c0 10 ff ff ff 00 00 30 07

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: 66Mhz, fast devsel, IRQ 10 I/O ports at fc00 [size=32] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 00: de 10 52 00 01 00 b0 00 a2 00 05 0c 00 00 80 00 10: 01 fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 1c 00 00 41 1c 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: 7b 14 28 1c 01 00 02 c0 00 00 00 00 00 00 00 00 50: 01 1c 00 00 41 1c 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00: de 10 5a 00 07 00 b0 00 a2 10 03 0c 00 00 80 00 10: 00 f0 02 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 7b 14 28 1c 01 00 02 fe 00 00 00 00 00 00 00 00 50: 08 00 00 00 1d 47 40 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 03 0c 30 07

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI]) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5 Memory at feb00000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port Capabilities: [80] Power Management version 2 00: de 10 5b 00 06 00 b0 00 a3 20 03 0c 00 00 80 00 10: 00 00 b0 fe 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 05 02 03 01 40: 7b 14 28 1c 0a 80 98 20 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00 70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 04 00 80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00 b0: 33 00 11 22 44 00 00 00 ff 03 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07

00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11 I/O ports at f000 [size=256] I/O ports at ec00 [size=256] Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00: de 10 59 00 07 00 b0 00 a2 00 01 04 00 00 00 00 10: 01 f0 00 00 01 ec 00 00 00 d0 02 fe 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 05 40: 7b 14 28 1c 01 00 02 06 00 00 00 00 06 01 00 21 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 05 08 30 07

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP]) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0 I/O ports at e800 [size=16] Capabilities: [44] Power Management version 2 00: de 10 53 00 05 00 b0 00 f2 8a 01 01 00 00 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 01 e8 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01 40: 7b 14 28 1c 01 00 02 00 00 00 00 00 00 00 00 00 50: 03 f0 01 00 00 00 00 00 a8 a8 a8 20 2a 00 99 20 60: 00 00 00 c5 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at d400 [size=16] Memory at fe02c000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00: de 10 54 00 07 00 b0 00 f3 85 01 01 00 00 00 00 10: f1 09 00 00 f1 0b 00 00 71 09 00 00 71 0b 00 00 20: 01 d4 00 00 00 c0 02 fe 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 03 01 40: 7b 14 28 1c 01 00 02 00 00 00 00 00 00 00 00 00 50: 17 00 00 15 00 00 00 00 a8 a8 a8 20 6a 00 99 20 60: 00 00 00 c7 51 0c 00 00 08 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 40 00 f0 a2 06 00 00 02 2c 00 00 00 00 90: 00 00 00 00 00 00 00 00 06 00 06 10 00 00 01 01 a0: 50 01 00 7c 00 00 00 00 00 00 00 00 33 bb aa 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 0a 00 02 68 42 00 00 00 00 00 00 00 00 00 00 80 e0: 0a 00 02 68 42 00 00 00 00 00 00 00 33 12 64 00 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 0e 38 32 07

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 11 I/O ports at 09e0 [size=8] I/O ports at 0be0 [size=4] I/O ports at 0960 [size=8] I/O ports at 0b60 [size=4] I/O ports at c000 [size=16] Memory at fe02b000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 00: de 10 55 00 07 00 b0 00 f3 85 01 01 00 00 00 00 10: e1 09 00 00 e1 0b 00 00 61 09 00 00 61 0b 00 00 20: 01 c0 00 00 00 b0 02 fe 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01 40: 7b 14 28 1c 01 00 02 00 00 00 00 00 00 00 00 00 50: 17 00 00 15 00 00 00 00 a8 a8 a8 a8 aa 00 99 99 60: 00 00 00 00 51 0c 00 00 08 0f 06 42 00 00 00 00 70: 2c 78 c4 40 01 10 00 00 01 10 00 00 20 00 20 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 06 00 06 10 00 00 01 01 a0: 50 01 00 00 00 00 00 00 00 00 00 00 33 bb aa 02 b0: 05 cc 84 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 0a 00 0a 00 08 00 02 a8 d0: 0a 00 02 57 42 00 00 00 00 00 00 00 b0 06 00 01 e0: 0a 00 02 57 42 00 00 00 00 00 00 00 0f 00 f0 07 f0: 00 00 00 00 00 00 00 00 00 ff ff ff 00 00 30 07

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66Mhz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: fdf00000-fdffffff 00: de 10 5c 00 07 00 a0 00 a2 01 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 20 a0 a0 80 22 20: e0 fd e0 fd f0 fd f0 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 04 02 40: 00 00 07 00 01 00 02 00 07 00 00 00 00 00 44 01 50: 00 00 fe bf 00 00 00 00 ff 1f ff 1f 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 fe bf 01 00 00 00 80: 00 03 00 00 80 00 00 00 00 00 00 00 08 00 00 a8 90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0a.0 Ethernet controller: nVidia Corporation CK804 Ethernet Controller (rev a3) Subsystem: ABIT Computer Corp.: Unknown device 1c28 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 10 Memory at fe02a000 (32-bit, non-prefetchable) [size=4K] I/O ports at bc00 [size=8] Capabilities: [44] Power Management version 2 00: de 10 56 00 07 00 b0 00 a3 00 00 02 00 00 00 00 10: 00 a0 02 fe 01 bc 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 7b 14 28 1c 30: 00 00 00 00 44 00 00 00 00 00 00 00 0a 01 01 14 40: 7b 14 28 1c 01 00 02 fe 00 01 00 00 0a 00 00 10 50: 05 64 84 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 0f 00 00 00 08 00 02 a8 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 11 00 00 00 00 ff ff ff 04 22 30 07

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000fdc00000-00000000fdc00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00: de 10 5d 00 07 00 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 00 91 91 00 00 20: d0 fd d0 fd c1 fd c1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 21 34 01 03 90: 00 00 41 10 80 0c 40 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fdb00000-fdbfffff Prefetchable memory behind bridge: 00000000fda00000-00000000fda00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00: de 10 5d 00 07 00 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 03 03 00 81 81 00 00 20: b0 fd b0 fd a1 fd a1 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 02 90: 00 00 41 10 00 05 20 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd900000-fd9fffff Prefetchable memory behind bridge: 00000000fd800000-00000000fd800000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00: de 10 5d 00 07 00 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 04 04 00 71 71 00 00 20: 90 fd 90 fd 81 fd 81 fd 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 04 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 11 34 01 01 90: 00 00 81 10 00 05 10 00 c0 01 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fa000000-fcffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000 Capabilities: [40] Power Management version 2 Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Capabilities: [58] HyperTransport: MSI Mapping Capabilities: [80] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel 00: de 10 5d 00 07 00 10 00 a3 00 04 06 10 00 01 00 10: 00 00 00 00 00 00 00 00 00 05 05 00 61 61 00 20 20: 00 fa f0 fc 01 d0 f1 df 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 00 1c 00 40: 01 48 02 f8 00 00 00 00 05 58 82 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 08 80 00 a8 00 00 e0 fe 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 41 01 c0 04 00 00 10 28 00 00 01 35 01 00 90: 00 00 01 11 80 25 08 00 c0 01 40 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

05:00.0 VGA compatible controller: nVidia Corporation NV44 [GeForce 6200 LE] (rev a1) (prog-if 00 [VGA]) Subsystem: ASUSTeK Computer Inc.: Unknown device 8205 Flags: bus master, fast devsel, latency 0, IRQ 5 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fb000000 (64-bit, non-prefetchable) [size=16M] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting 00: de 10 63 01 07 00 10 00 a1 00 00 03 10 00 00 00 10: 00 00 00 fa 0c 00 00 d0 00 00 00 00 04 00 00 fb 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 05 82 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 00 01 00 c0 04 2c 01 80: 10 28 0a 00 01 4d 01 00 08 00 01 11 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

____________________________________________

/sbin/lspci -t

-[0000:00]-+-00.0 +-01.0 +-01.1 +-02.0 +-02.1 +-04.0 +-06.0 +-07.0 +-08.0 +-09.0-[0000:01]-- +-0a.0 +-0b.0-[0000:02]-- +-0c.0-[0000:03]-- +-0d.0-[0000:04]-- +-0e.0-[0000:05]----00.0 +-18.0 +-18.1 +-18.2 -18.3

Skipping dmidecode output (dmidecode not found) ____________________________________________

Scanning kernel log files for NVRM messages:

/var/log/messages:

____________________________________________

dmesg:

Bootdata ok (command line is ro root=LABEL=/ rhgb quiet noapic nolapic vga=794 console=/dev/ttyUSB0,38400 selinux=0) Linux version 2.6.9-42.0.10.ELsmp (mockbuild@builder5.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Feb 27 09:40:21 EST 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable) BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS) BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 00000001c0000000 (usable) ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7cd0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff3040 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff30c0 ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfff96c0 ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9a00 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x00000000bfff9600 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 Enabling SRAT NUMA discovery Warning: acpi_table_parse(ACPI_SRAT) returned 0! Warning: acpi_table_parse(ACPI_SLIT) returned 0! acpi_numa_init() failed, disabling ACPI NUMA config Scanning NUMA topology in Northbridge 24 Number of nodes 1 (10000) Node 0 MemBase 0000000000000000 Limit 00000001bfffffff Using 21 for the hash shift. Max addr is 1bfffffff Using node hash shift of 21 Bootmem setup node 0 0000000000000000-00000001bfffffff No mptable found. On node 0 totalpages: 1835007 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 1830911 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. Nvidia board detected. Ignoring ACPI timer override. ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Setting APIC routing to flat ACPI: Skipping IOAPIC probe due to 'noapic' option. Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 <6>Product ID: PROD00000000 <6>APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) Checking aperture... CPU 0: aperture @ 4000000 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet noapic nolapic vga=794 console=/dev/ttyUSB0,38400 selinux=0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2800.041 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Memory: 6106484k/7340032k available (2106k kernel code, 0k reserved, 1299k data, 196k init) Calibrating delay using timer specific routine.. 5603.51 BogoMIPS (lpj=2801758) Security Scaffold v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 ACPI: IRQ9 SCI: Edge set to Level Trigger. Using local APIC NMI watchdog using perfctr0 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(2) -> Node 0 CPU0: AMD Athlon(tm) 64 FX-62 Dual Core Processor stepping 02 per-CPU timeslice cutoff: 1023.85 usecs. task migration cache decay timeout: 2 msecs. Booting processor 1/1 rip 6000 rsp 10008c75f58 Initializing CPU#1 Calibrating delay using timer specific routine.. 5599.20 BogoMIPS (lpj=2799601) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(2) -> Node 0 AMD Athlon(tm) 64 FX-62 Dual Core Processor stepping 02 Total of 2 processors activated (11202.71 BogoMIPS). Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. checking TSC synchronization across 2 CPUs: passed. spurious 8259A interrupt: IRQ7. Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. checking if image is initramfs... it is NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040816 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *5 10 11) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LUBB] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LACI] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LMCI] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LUB2] (IRQs *5 10 11) ACPI: PCI Interrupt Link [LIDE] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 5 *10 11) ACPI: PCI Interrupt Link [LFID] (IRQs 5 10 *11) ACPI: PCI Interrupt Link [LPCA] (IRQs 5 10 11) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5 ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 5 (level, low) -> IRQ 5 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 4000000 size 65536 KB PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1174550466.322:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key F6CD757FDE265743 - User ID: CentOS (Kernel Module GPG key) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Thermal Zone [THRM] (32 C) Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: LITE-ON DVDRW LH-20A1P, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 262144 (order: 10, 4194304 bytes) TCP: Hash tables configured (established 262144 bind 262144) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 (1350 mV) powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe (1200 mV) powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 (1150 mV) powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 (1150 mV) powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: cpu_init done, current fid 0x14, vid 0x8 powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8 (1350 mV) powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc (1250 mV) powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe (1200 mV) powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 (1150 mV) powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 (1150 mV) powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) powernow-k8: cpu_init done, current fid 0x14, vid 0x8 ACPI: (supports S0 S3 S4 S5) ACPI wakeup devices: HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI Freeing unused kernel memory: 196k freed Warning: unable to open an initial console. SCSI subsystem initialized libata version 1.20 loaded. sata_nv 0000:00:07.0: version 0.8 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 10 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 10 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48 nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv ata2: SATA link down (SStatus 0) scsi1 : sata_nv Vendor: ATA Model: ST380815AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda:<4>nv_sata: Primary device added nv_sata: Primary device removed nv_sata: Secondary device added nv_sata: Secondary device removed sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 11 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 11 ata3: SATA link down (SStatus 0) scsi2 : sata_nv ata4: SATA link down (SStatus 0) scsi3 : sata_nv device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. inserting floppy driver for 2.6.9-42.0.10.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.41. ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:0a.0 to 64 divert: allocating divert_blk for eth0 eth0: forcedeth.c: subsystem: 0147b:1c28 bound to 0000:00:0a.0 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:04.0 to 64 intel8x0_measure_ac97_clock: measured 50020 usecs intel8x0: clocking to 46772 shpchp: Address64 -------- Resource unparsed shpchp: Address64 -------- Resource unparsed shpchp: Address64 -------- Resource unparsed shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:02.1: EHCI Host Controller PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 5, pci mem ffffff0000022000 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: OHCI Host Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 11, pci mem ffffff0000024000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. ohci_hcd 0000:00:02.0: wakeup usb 2-4: new full speed USB device using address 2 drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver ftdi_sio 2-4:1.0: FTDI FT232BM Compatible converter detected usb 2-4: FTDI FT232BM Compatible converter now attached to ttyUSB0 usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver ACPI: Power Button (FF) [PWRF] EXT3 FS on sda1, internal journal cdrom: open failed. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 16383992k swap on /dev/vg1/lvm_swap. Priority:-1 extents:1 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 456 bytes per conntrack Linux Kernel Card Services options: [pci] [cardbus] [pm] lp: driver loaded but no devices found drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes drivers/usb/serial/ftdi_sio.c: write request of 0 bytes ____________________________________________

Reading specs from /usr/lib/gcc/x86_64-redhat-linux/3.4.6/specs Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --disable-checking --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-java-awt=gtk --host=x86_64-redhat-linux Thread model: posix gcc version 3.4.6 20060404 (Red Hat 3.4.6-3) ____________________________________________

xset -q:

____________________________________________

nvidia-settings -q all:

____________________________________________

End of NVIDIA bug report log file.

[2]$ hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media Model Number: ST380815AS Serial Number: 5QZ0SXAP Firmware Revision: 3.AAC Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 156301488 LBA48 user addressable sectors: 156301488 device size with M = 1024*1024: 76319 MBytes device size with M = 1000*1000: 80026 MBytes (80 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 208, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * FLUSH CACHE EXT command * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * 48-bit Address feature set SET MAX security extension * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count not supported: enhanced erase Checksum: correct

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

tblader

2:40 p.m.

tblader wrote:

...

William Warren wrote:

...
on the unstable machine..what mobo, cpu, nic, vid, hdd, etc etc etc.

<snip>

motherboard = nvidia kn9 (Nforce 4 Ultra)

This is incorrect - motherboard is Abit KN9 (Nforce 4 Ultra chipset)

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Feizhou

23 Mar 23 Mar

7:52 a.m.

...

This is incorrect - motherboard is Abit KN9 (Nforce 4 Ultra chipset)

Are you sure? The Abit KN9 does not use Nforce 4.

tblader

2:25 p.m.

Feizhou wrote:

...

...
This is incorrect - motherboard is Abit KN9 (Nforce 4 Ultra chipset)

Are you sure? The Abit KN9 does not use Nforce 4.

I know - Abit has made things confusing with the KN9, KN9S and KN9 SLI. The boards I have are the KN9 NF4 Ultra [0]. The other offerings are chipsets Nvidia 550 MCP [1], Nvidia 570 SLI [2], and Nvidia 570 Ultra MCP [3].

I can only imagine the marketing department at Abit is only a little less than schizophrenic these days.

[0] - http://www.newegg.com/Product/Product.aspx?Item=N82E16813127010 [1] - http://www.newegg.com/Product/Product.aspx?Item=N82E16813127007 [2] - http://www.newegg.com/Product/Product.aspx?Item=N82E16813127236 [3] - http://www.newegg.com/Product/Product.aspx?Item=N82E16813127008

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Feizhou

2:54 p.m.

tblader wrote:

...

Feizhou wrote:

...
...
This is incorrect - motherboard is Abit KN9 (Nforce 4 Ultra chipset)

Are you sure? The Abit KN9 does not use Nforce 4.

I know - Abit has made things confusing with the KN9, KN9S and KN9 SLI. The boards I have are the KN9 NF4 Ultra [0]. The other offerings are chipsets Nvidia 550 MCP [1], Nvidia 570 SLI [2], and Nvidia 570 Ultra MCP [3].

Is the thing stable with 6GB without the kernel parameters? :D

I am asking because someone else reports using an Abit KN9 without any acpi or apic related parameters and having stability.

tblader

4:42 p.m.

Feizhou wrote: <snip>

...

Is the thing stable with 6GB without the kernel parameters? :D

I am asking because someone else reports using an Abit KN9 without any acpi or apic related parameters and having stability.

I tried running with all 4 sticks and the dram clocked down to DDR-667 without the noapic and nolapic params and it hurled after a short time. I was using the default BIOS settings originally (ddr-800) and started with the kernel parameters, so I would say it was unstable at ddr-800 as well.

Right now, it's been running for about 40 minutes (the Java install loop mentioned previously) with the dram clocked down to ddr-533. All four sticks are in and I ssh'd in and started another java install loop over the wire just to aggravate things. If this continues to run for a few hours I'll call it good enough.

I don't believe this to be a Kernel/Centos issue at all from what I've learned, so thanks for all the off-topic support :)

Thomas

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

John R Pierce

4:46 p.m.

tblader wrote:

...

I tried running with all 4 sticks and the dram clocked down to DDR-667 without the noapic and nolapic params and it hurled after a short time. .....

http://www.memtest.org/

tblader

5:04 p.m.

John R Pierce wrote: <snip>

...

http://www.memtest.org/

Thanks. I ran memtest86 off a knoppix5.1 cd for about 12 hours on all four sticks. It made 6 passes and did not return any errors. Perhaps I should have left it run longer?

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Morten Torstensen

24 Mar 24 Mar

12:06 a.m.

tblader wrote:

...

Thanks. I ran memtest86 off a knoppix5.1 cd for about 12 hours on all four sticks. It made 6 passes and did not return any errors. Perhaps I should have left it run longer?

I don't trust memtest86 for 64-bit mode kernels... I've seen examples of it running just fine for days, when the kernel barfs after an hours usage. It is just 2 machines, so not a large sample from my side.

Clocking down the memory helped in one case.

-- //Morten Torstensen //Email: morten@mortent.org //IM: Cartoon@jabber.no morten.torstensen@gmail.com And if it turns out that there is a God, I don't believe that he is evil. The worst that can be said is that he's an underachiever.

John R Pierce

12:34 a.m.

Morten Torstensen wrote:

...

tblader wrote:

...
Thanks. I ran memtest86 off a knoppix5.1 cd for about 12 hours on all four sticks. It made 6 passes and did not return any errors. Perhaps I should have left it run longer?

I don't trust memtest86 for 64-bit mode kernels... I've seen examples of it running just fine for days, when the kernel barfs after an hours usage. It is just 2 machines, so not a large sample from my side.

Clocking down the memory helped in one case.

I do think a 64bit version of memtest86 would be a good thing... I'm unclear how a 32bit app could test memory above about 3GB unless its playing the PAE game (3GB because in a 32bit system, the PCI bus peripherals take about the top ~ 1GB for their I/O space, so the ram has to be mapped to a higher physical address, only accessible via PAE...

Morten Torstensen

12:10 p.m.

John R Pierce wrote:

...

I do think a 64bit version of memtest86 would be a good thing... I'm unclear how a 32bit app could test memory above about 3GB unless its playing the PAE game (3GB because in a 32bit system, the PCI bus peripherals take about the top ~ 1GB for their I/O space, so the ram has to be mapped to a higher physical address, only accessible via PAE...

Yea, addressing is one issue, but I have seen problems on 1GB machines too. Mind you, memtest is probably right and the memory modules probably were ok. It is some combination of chipsets, memory and linux in 64-bit mode that stress parts of the entire memory system. That is what memtest is unable to detect. Few people run in 64-bit mode compared to 32-bit... still some snags to work in the chipsets/memory I guess.

In real life a "while true; compile kernel; done" loop would panic the kernel in 10-30 minutes. Memtest didn't find problems. Changing memory modules to a different brand or lowering clockspeed made the system stable.

As for 32-bit and testing... remember there is a big difference between address space and memory. You would just map the memory in the 4GB address range and test it, same method as you would do with PAE mapping - up to 64GB. But that is still big enough for most people :)

Feizhou

9:37 a.m.

tblader wrote:

...

Feizhou wrote:

<snip> > > Is the thing stable with 6GB without the kernel parameters? :D > > I am asking because someone else reports using an Abit KN9 without any > acpi or apic related parameters and having stability.

I tried running with all 4 sticks and the dram clocked down to DDR-667 without the noapic and nolapic params and it hurled after a short time. I was using the default BIOS settings originally (ddr-800) and started with the kernel parameters, so I would say it was unstable at ddr-800 as well.

Well...I don't think the previous guy used all four slots but thanks for reporting :)

...

Right now, it's been running for about 40 minutes (the Java install loop mentioned previously) with the dram clocked down to ddr-533. All four sticks are in and I ssh'd in and started another java install loop over the wire just to aggravate things. If this continues to run for a few hours I'll call it good enough.

So all four sticks, clocked down and kernel parameters = A-OKAY (assuming it is stable)

...

I don't believe this to be a Kernel/Centos issue at all from what I've learned, so thanks for all the off-topic support :)

:) When using noapic and acpi=off, it is a given that it is not a kernel problem. These parameters are to work around BIOS or other motherboard issues.

Morten Torstensen

2:23 p.m.

Feizhou wrote:

...

:) When using noapic and acpi=off, it is a given that it is not a kernel problem. These parameters are to work around BIOS or other motherboard issues.

And noapic especially severely limits your computer... no advanced irq mapping or routing. For a server it is a no-go option, for a desktop it might be a temporary workaround.

If noapic and/or acpi=off solves a problem, it is just a help to pinpoint the problem, it is not a solution. The solution is to get the manufacturer to fix their broken bios.

Speaking of that... maybe OpenFirmware would be a solution? Never tried it myself on x86 class machines. Anyone with any experience?

tblader

2:46 p.m.

Feizhou wrote: <snip>

...

...
Right now, it's been running for about 40 minutes (the Java install loop mentioned previously) with the dram clocked down to ddr-533. All four sticks are in and I ssh'd in and started another java install loop over the wire just to aggravate things. If this continues to run for a few hours I'll call it good enough.

So all four sticks, clocked down and kernel parameters = A-OKAY (assuming it is stable)

Almost. Much to my dismay, the 4 stick testing went well but the BIOS screens occasionally hung during reboot through the course of the day. I finally just pulled the 4th stick and went home.

I've modified the rc3.d/S99local* script to just reboot every 10 minutes and compile a kernel and modules in between. I thought I'd heat things up a bit piping urandom into /dev/null as well.

I've got other fx-62 boxes running the same mainboard with all 4 ram slots full, but those are Corsair ram @1G each - the ram timings are different as well; 5-5-5-12 for the Corsair and 6-6-6-18 for the GSkill. Maybe the GSkill ram just isn't up to the task running Dual channel. I have the weekend to play with it so maybe I'll try two sticks in Dual Channel for a while and see what happens.

I'll post kernel compile times between the 3 sticks in single channel and 2 in dual channel :)

[*] echo /sbin/reboot | at now+10min dd if=/dev/urandom of=/dev/null & /usr/src/t/kerncompile &

Scott Silva

7:25 p.m.

tblader spake the following on 3/24/2007 6:46 AM:

...

Feizhou wrote:

<snip>

...
...
Right now, it's been running for about 40 minutes (the Java install loop mentioned previously) with the dram clocked down to ddr-533. All four sticks are in and I ssh'd in and started another java install loop over the wire just to aggravate things. If this continues to run for a few hours I'll call it good enough.

So all four sticks, clocked down and kernel parameters = A-OKAY (assuming it is stable)

Almost. Much to my dismay, the 4 stick testing went well but the BIOS screens occasionally hung during reboot through the course of the day. I finally just pulled the 4th stick and went home.

I've modified the rc3.d/S99local* script to just reboot every 10 minutes and compile a kernel and modules in between. I thought I'd heat things up a bit piping urandom into /dev/null as well.

I've got other fx-62 boxes running the same mainboard with all 4 ram slots full, but those are Corsair ram @1G each - the ram timings are different as well; 5-5-5-12 for the Corsair and 6-6-6-18 for the GSkill. Maybe the GSkill ram just isn't up to the task running Dual channel. I have the weekend to play with it so maybe I'll try two sticks in Dual Channel for a while and see what happens.

I'll post kernel compile times between the 3 sticks in single channel and 2 in dual channel :)

I bet the bios of the board is either not honoring the SPD settings of the memory, or the memory just isn't a good match for the board. I have had this problem before, and now I usually only buy memory that is on the recommended list of the manufacturer, especially on critical systems. It just isn't worth the extra trouble to maybe save a few bucks. Your time tracking down the problem probably has already gone over the difference in memory cost.

-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

John R Pierce

8:21 p.m.

Scott Silva wrote:

...

I bet the bios of the board is either not honoring the SPD settings of the memory, or the memory just isn't a good match for the board.

or, the SPD data is bogus or overly optimistic, often a issue with offbrand memory.

re: motherboard recommended memory, the taiwanese mobo makers (asus, gigabyte, abit, etc etc) rarely even have any such recommendations published. I usually only find that sort of data on the US brands (Intel, SuperMicro, Tyan, and so forth), and, of course, the major server makers like IBM, HP, Dell, etc. only 'recommend' their own memory, which while expensive, is covered by factory service and warranty, and will almost certainly meet the systems specifications and requirements.

Things like motherboards are sold as OEM components, and it is assumed that the OEM will do the testing and qualification.

That all said, with AMD Athlon 64 and Opteron CPUs, the memory controller is in the CPU chip, not the chipset, so all the motherboard contributes is the board layout and DIMM sockets, and the BIOS configured memory timings... So, going with memory thats been certified by AMD is probably a good idea.

Unluckily, it doesn't appear AMD has much of a memory compatability program.... From their website, http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_869_9460%5E...

* AMD Athlon™ 64 Processor Family Memory Guidelines*

In our ongoing efforts to support industry standards, AMD Athlon™ 64 processor-based platforms may be designed to leverage industry standard DDR unbuffered DIMMs. An independent testing company, Computer Memory Test Labs (CMTL), has conducted memory compatibility testing. CMTL is an independent test facility and is able to test RAM modules from different module suppliers. System builders should access the CMTL web site a www.cmtlabs.com http://www.cmtlabs.com and view the recommended memory module list for the specific motherboard manufacturer and motherboard model.

* Note*: The CMTL website is provided for informational purposes only, and AMD recommends that a system builder conduct its own testing and validation to confirm that the memory modules are suitable for its systems.

Feizhou

26 Mar 26 Mar

6:54 a.m.

...

I've got other fx-62 boxes running the same mainboard with all 4 ram slots full, but those are Corsair ram @1G each - the ram timings are different as well; 5-5-5-12 for the Corsair and 6-6-6-18 for the GSkill. Maybe the GSkill ram just isn't up to the task running Dual channel. I have the weekend to play with it so maybe I'll try two sticks in Dual Channel for a while and see what happens.

Do you need any of these kernel parameters on those other boxes?

Dave K

28 Mar 28 Mar

7:40 p.m.

I know this won't help the original poster right away, but I'm wondering if what's needed is a memory test that not only spins through the memory but also does DMA transfers back and forth to a disk, and/or other similar functions. It might also be useful to have a second thread exercising the cpu core(s) to "heat things up".

These are some of the things different between running memtest86 and running the OS and doing "something".

-- Dave K Unix Systems & Network Administrator Mount Laurel NJ

tblader

29 Mar 29 Mar

3:44 p.m.

Dave K wrote:

...

I know this won't help the original poster right away, but I'm wondering if what's needed is a memory test that not only spins through the memory but also does DMA transfers back and forth to a disk, and/or other similar functions. It might also be useful to have a second thread exercising the cpu core(s) to "heat things up".

These are some of the things different between running memtest86 and running the OS and doing "something".

Good point. Memtest86 didn't find any problems for the 6 or so passes it made when running the 8gig in dual channel. Someone also mentioned memtest86 doesn't run the cpu in 64bit mode.

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

tblader

3:42 p.m.

Feizhou wrote:

...

...
I've got other fx-62 boxes running the same mainboard with all 4 ram slots full, but those are Corsair ram @1G each - the ram timings are different as well; 5-5-5-12 for the Corsair and 6-6-6-18 for the GSkill. Maybe the GSkill ram just isn't up to the task running Dual channel. I have the weekend to play with it so maybe I'll try two sticks in Dual Channel for a while and see what happens.

Do you need any of these kernel parameters on those other boxes?

nah - the other boxes boot fine without the boot params. The problem box is running fine with the three sticks - I'll remove the boot params from grub at some point and see if anything changes.

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Feizhou

5:41 p.m.

...

nah - the other boxes boot fine without the boot params. The problem box is running fine with the three sticks - I'll remove the boot params from grub at some point and see if anything changes.

Thanks a lot for your information and trouble.

Stephen Harris

22 Mar 22 Mar

1:50 p.m.

...

I have run memtest86 (from Knoppix 5.1) all night long on the 8 gig of ram and it comes up OK. In the past, we have found problematic Corsair ram this way. This 8 gig seems to be OK as far as memtest thinks.

Today I will begin removing ram and testing to see what happens. Does anyone have some ideas what might be the problem? All the other five boxes with Corsair ram work fine.

Is this the only box with 8Gb RAM? Do the others have smaller amounts? Is the motherboard and BIOS the same? Are you running the same kernel?

Is the machine stable if you run it with mem=1024M on the kernel options line (so limitting it to 1Gb RAM). Do you need the hugemem kernel?

-- rgds Stephen

Peter Kjellstrom

2:24 p.m.

On Thursday 22 March 2007, Stephen Harris wrote:

...

...
I have run memtest86 (from Knoppix 5.1) all night long on the 8 gig of ram and it comes up OK. In the past, we have found problematic Corsair ram this way. This 8 gig seems to be OK as far as memtest thinks.

Today I will begin removing ram and testing to see what happens. Does anyone have some ideas what might be the problem? All the other five boxes with Corsair ram work fine.

Is this the only box with 8Gb RAM? Do the others have smaller amounts? Is the motherboard and BIOS the same? Are you running the same kernel?

Is the machine stable if you run it with mem=1024M on the kernel options line (so limitting it to 1Gb RAM). Do you need the hugemem kernel?

He's on x86_64, no need for hugemem.

/Peter

tblader

2:42 p.m.

Stephen Harris wrote: <snip>

...

Is this the only box with 8Gb RAM? Do the others have smaller amounts? Is the motherboard and BIOS the same? Are you running the same kernel?

Other boxes run 4 sticks of 1 gig each of Corsair XMS-2 dual channel pc6400 ram. Some boxes are at Abit BIOS rev level 10 and some at 11. the 8gig box is at rev 11 (abit-kn9-kn9c11.zip)

...

Is the machine stable if you run it with mem=1024M on the kernel options line (so limitting it to 1Gb RAM). Do you need the hugemem kernel?

I have not tried the mem= kernel param yet but I will probably remove sticks of ram 1 at a time to see what happens.

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Peter Kjellstrom

2:26 p.m.

On Thursday 22 March 2007, tblader wrote:

...

Hello All. I have five Centos 4.4 x86_64 (amd fx-62) boxes with 4 gig of Corsair dual channel ram running kernel 2.6.9-42.0.10.EL (smp).

The sixth box is the same except for video card and ram.

Have you tried to switch memory modules between two of your machines? ..would be interesting to see if the problem follows that memory or stays with the box.

...

It is using 8gig of GSkill dual channel ram and has a very cheap ATI video card in it.

Do you use fglrx (ati's kernel module). If so, does it die even if you don't load it?

/Peter

tblader

2:38 p.m.

Peter Kjellstrom wrote:

...

On Thursday 22 March 2007, tblader wrote:

...
Hello All. I have five Centos 4.4 x86_64 (amd fx-62) boxes with 4 gig of Corsair dual channel ram running kernel 2.6.9-42.0.10.EL (smp).

The sixth box is the same except for video card and ram.

Have you tried to switch memory modules between two of your machines? ..would be interesting to see if the problem follows that memory or stays with the box.

...
It is using 8gig of GSkill dual channel ram and has a very cheap ATI video card in it.

Do you use fglrx (ati's kernel module). If so, does it die even if you don't load it?

I have not swapped memory modules for the Corsair ones yet however I have pulled one stick of the Gskill ram out to leave 6 gig now. Will see if I can reproduce the lockup with the 6 gig and keep removing ram until something changes. I can swap out the GSkill for the corsair during the weekend as the other boxes are in use during the day.

I have left the X configuration as default. xorg.conf shows vesa mode and the following modules (probably only used when vncserver is running on localhost?):

... Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection ...

Section "Device" Identifier "Videocard0" Driver "vesa" VendorName "Videocard vendor" BoardName "VESA driver (generic)" EndSection ...

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

tblader

5:01 p.m.

Hi All, Just a follow up. Pulling out one stick (2 gig) of the 8 seems to fix the problem.

I ran into the most problems while installing Sun's Java (jre-1_5_0_11-linux-i586.bin) while this is unzipping into /usr/local is when things consistently lock up. This is what I've been using to test things. There is sufficient disk space in the partition.

I bypassed the prompt during the install and made a loop that removes the jre1.5.0_11 directory and then just does sh -x on the jre-1_5_0_11-linux-i586.bin. Leaving this run will lock the machine within a couple loops. Removing 1 stick of ram , the loop continues to run at least for 15 minutes before I terminated it.

I've moved the ram around in different slots to see if it made a difference, as well as removed different single sticks to test. It seems the only thing that improves stability is to remove a single stick out of either the channel A or channel B slots.

On the last test with all 4 sticks in, this message was printed to my ssh session right before hurling.

oas kernel: Assertion failure in __journal_temp_unlink_buffer() at fs/jbd/transaction.c:1521: "jbd_is_locked_bh_state(bh)"

Hopefully this all makes sense to someone more knowlegeable than I.

Thomas

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Scott Silva

6:16 p.m.

tblader spake the following on 3/22/2007 9:01 AM:

...

Hi All, Just a follow up. Pulling out one stick (2 gig) of the 8 seems to fix the problem.

I ran into the most problems while installing Sun's Java (jre-1_5_0_11-linux-i586.bin) while this is unzipping into /usr/local is when things consistently lock up. This is what I've been using to test things. There is sufficient disk space in the partition.

I bypassed the prompt during the install and made a loop that removes the jre1.5.0_11 directory and then just does sh -x on the jre-1_5_0_11-linux-i586.bin. Leaving this run will lock the machine within a couple loops. Removing 1 stick of ram , the loop continues to run at least for 15 minutes before I terminated it.

I've moved the ram around in different slots to see if it made a difference, as well as removed different single sticks to test. It seems the only thing that improves stability is to remove a single stick out of either the channel A or channel B slots.

On the last test with all 4 sticks in, this message was printed to my ssh session right before hurling.

oas kernel: Assertion failure in __journal_temp_unlink_buffer() at fs/jbd/transaction.c:1521: "jbd_is_locked_bh_state(bh)"

Hopefully this all makes sense to someone more knowlegeable than I.

Thomas

Maybe this MOBO is just choking on the combination of the type and quantity of ram. Maybe the ram timing is just slightly under spec, and pulling one stick puts the board into single channel mode. Have you tried pulling a stick from the other channel also, so the board goes back into dual-channel mode, and testing again? You could also see if you can change the memory timing slightly with the 8 gigs of ram. See if the bios will let you turn off SPD mode and let you set timings manually.

-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

tblader

6:24 p.m.

Scott Silva wrote: <snip>

...

Maybe this MOBO is just choking on the combination of the type and quantity of ram. Maybe the ram timing is just slightly under spec, and pulling one stick puts the board into single channel mode. Have you tried pulling a stick from the other channel also, so the board goes back into dual-channel mode, and testing again? You could also see if you can change the memory timing slightly with the 8 gigs of ram. See if the bios will let you turn off SPD mode and let you set timings manually.

I've removed two sticks from channel B, and just running with the matched pair in channel A. The java install has been running for almost an hour straight. When I get back over to the server room, I'll power it off and try the same pair in channel B to see how it goes.

Thanks for the SPD tip - I'll check that out as well.

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

John R Pierce

7:02 p.m.

I seem to recall there were some generations of Opterons where if you ran 3 or fewer banks (6 or fewer dimms, balanced for dual channel), you could run at PC3200 speed, but if you populated all 4 banks (8 dimms), you had to downgrade the memory bus to PC2700 or something. Could be you're running into something like this.

Scott Silva

7:22 p.m.

John R Pierce spake the following on 3/22/2007 11:02 AM:

...

I seem to recall there were some generations of Opterons where if you ran 3 or fewer banks (6 or fewer dimms, balanced for dual channel), you could run at PC3200 speed, but if you populated all 4 banks (8 dimms), you had to downgrade the memory bus to PC2700 or something. Could be you're running into something like this.

Also check the voltage req. of the memory. Maybe the board is under volt for the specific ram.

-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

Scott Silva

7:54 p.m.

tblader spake the following on 3/22/2007 9:01 AM:

...

Hi All, Just a follow up. Pulling out one stick (2 gig) of the 8 seems to fix the problem.

I ran into the most problems while installing Sun's Java (jre-1_5_0_11-linux-i586.bin) while this is unzipping into /usr/local is when things consistently lock up. This is what I've been using to test things. There is sufficient disk space in the partition.

I bypassed the prompt during the install and made a loop that removes the jre1.5.0_11 directory and then just does sh -x on the jre-1_5_0_11-linux-i586.bin. Leaving this run will lock the machine within a couple loops. Removing 1 stick of ram , the loop continues to run at least for 15 minutes before I terminated it.

I've moved the ram around in different slots to see if it made a difference, as well as removed different single sticks to test. It seems the only thing that improves stability is to remove a single stick out of either the channel A or channel B slots.

On the last test with all 4 sticks in, this message was printed to my ssh session right before hurling.

oas kernel: Assertion failure in __journal_temp_unlink_buffer() at fs/jbd/transaction.c:1521: "jbd_is_locked_bh_state(bh)"

Hopefully this all makes sense to someone more knowlegeable than I.

Thomas

Looking online, there are many pages that mention problems with DDR2-800 memory needing the voltages turned up to 1.9 volts. Something else to try.

-- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!

tblader

23 Mar 23 Mar

2:17 p.m.

Scott Silva wrote: <snip>

...

...
Looking online, there are many pages that mention problems with DDR2-800 memory needing the voltages turned up to 1.9 volts. Something else to try.

I tried the ram at 1.9 volts (from the 1.8 in the BIOS) and it worked good on the bench for a few minutes, but after SSH'ing in however, it locked up soon after. I thought perhaps the nic is flaky, but removing a single stick of ram from the board seems to stabilize everything whether it's a console or ssh session.

I have the option in the bios of turning the ram speed down to 667mhz all the way to 400. I will try all 4 sticks at 400 today. There are a ton of other settings for the dram that I do not know what they do.

Found an article on google groups suggesting using all 4 slots is a crap shoot. Hmm..

[*] - http://groups.google.com/group/misc.forsale.computers.memory/browse_thread/t...

-- Flambeau Inc. Technology Center - Baraboo, WI Email : tblader@flambeau.com Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C

Feizhou

2:56 p.m.

...

Found an article on google groups suggesting using all 4 slots is a crap shoot. Hmm..

:( That is valid for a host of motherboards...that fourth slot is forbidden...

6552

Age (days ago)

6559

Last active (days ago)

discuss@lists.centos.org

35 comments

9 participants

tags (0)

participants (9)

Dave K
Feizhou
John R Pierce
Morten Torstensen
Peter Kjellstrom
Scott Silva
Stephen Harris
tblader
William Warren