Joseph L. Casale wrote:
I have a machine I just deployed w/ tg3 interfaces, I have setup bonding on this same line of server (HP DL380 G4) a million times. I saw there were changes recently to how you configure a bond and have my setup configured according to: http://kbase.redhat.com/faq/docs/DOC-7431
Can you post the contents of /proc/net/bonding/bond0 too?
nate
Can you post the contents of /proc/net/bonding/bond0 too?
Here it is!
# cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.4.0 (October 7, 2008)
Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 500 Up Delay (ms): 0 Down Delay (ms): 0
802.3ad info LACP rate: slow Active Aggregator Info: Aggregator ID: 3 Number of ports: 2 Actor Key: 17 Partner Key: 51 Partner Mac Address: 00:14:38:79:c1:00
Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:14:c2:c2:bb:13 Aggregator ID: 3
Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:14:c2:c2:bb:12 Aggregator ID: 3
-
Joseph L. Casale -
nate