I have an odd problem with an IBM EServer XSeries 305 (aka x305). Sometimes it seems to just sit there, completely unresponsive to the command line (ssh and console), for several seconds. Other times it works normally. top will sometimes die with a floating point error while waiting for it to start. When top does work, it often shows a system load of 0.5, with high interrupt load.

At first I though that the tg3 driver was not playing nicely, so I disabled the onboard NICs and installed a 3Com card. This seemed to clear up the problem, but it's now returned two days later.

System is running CentOS 4.4, no X, Apache and MySQL.

CPU is a P4 1.8GHz 512MB RAM 40GB ATA-100 disk

Any suggestions on where to look next are appreciated.

--Chris

Have you run or considered running memtest86+ from the centos install cd ??

If physical memory problems isn't it, have you done this

chkconfig --list | grep :on | more

And shut off any of the items that are not necessary on your unit?

I can provide a list if you need it of things that are typically not needed in our situations.

You more than likely know this yet...

ps ax | more

will show many of them as well.

- rh

-- Robert - Abba Communications Computer & Internet Services (509) 624-7159 - www.abbacomm.net