Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
-Ross
______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
Hey,
If I take swap out of the LVM section and create a regular partition for swap it fails.
Michael
Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
-Ross
This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Michael Gale wrote:
Hey,
If I take swap out of the LVM section and create a regular partition for swap it fails.
Maybe you have some bad white space in there. Accidentally quoted some control character or such.
I'd wipe those lines out in vi and re-type them to be certain.
-Ross
Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2
fails ? I know I
need swap and such, however in trouble shooting this issue
I trimmed
down my config.
It fails on trying to format my logical volume, because
the mount point
does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created
and LVM is setup
correctly. However the volgroup / logvolume was not made
active, so my
/dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which
would allow the
format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol
--vgname=os_volgroup01 --recommended
logvol / --fstype ext3 --name=os_root
--vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root
--vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS
--size=4096 --grow --maxsize=16384
logvol swap --fstype swap --name=swap --vgname=CentOS
--size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects
there to be a swap definition
in kickstart, so that might be it, lv wasn't activated
because swap was missing.
Best I can think of.
-Ross
This e-mail, and any attachments thereto, is intended only
for use by
the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the
intended recipient
of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-- Michael Gale
Red Hat Certified Engineer Network Administrator Pason Systems Corp.
"It's not that I'm so smart, it's just that I stay with problems longer." - Albert Einstein _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
Hey,
So I have created another kickstart that I believe should be correct and it fails the same way with the same problems:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part swap --size=1000 part pv.os --size=8000 --grow --maxsize=8000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
Michael
Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
-Ross
This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Michael Gale wrote:
Hey,
So I have created another kickstart that I believe should be correct and it fails the same way with the same problems:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part swap --size=1000 part pv.os --size=8000 --grow --maxsize=8000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
How about:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 --asprimary part swap --size=1000 part pv.os --size=8000 volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
I removed the '--grow' and '--maxsize' options from the pv.os partition setup as you know what the size you want it to be, there is no need for these. I also moved the --asprimary option to the /boot partition, really only /boot needs to be --asprimary, and then again you really only need that if you have existing partitions on disk that are being preserved, which with 'clearpart --all' you won't have.
I would put swap into the volgroup though as there is no need for a completely separate swap partition anymore. In fact swap files work just as well these days as swap partitions or swap logical volumes, but anaconda still needs a swap partition or logical volume, so create a swap logical volume, then you can extend it later if necessary or create a swapfile and move over to that.
-Ross
Michael Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
So I have created another kickstart that I believe should be correct and it fails the same way with the same problems:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part swap --size=1000 part pv.os --size=8000 --grow --maxsize=8000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
How about:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 --asprimary part swap --size=1000 part pv.os --size=8000 volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
I removed the '--grow' and '--maxsize' options from the pv.os partition setup as you know what the size you want it to be, there is no need for these. I also moved the --asprimary option to the /boot partition, really only /boot needs to be --asprimary, and then again you really only need that if you have existing partitions on disk that are being preserved, which with 'clearpart --all' you won't have.
I would put swap into the volgroup though as there is no need for a completely separate swap partition anymore. In fact swap files work just as well these days as swap partitions or swap logical volumes, but anaconda still needs a swap partition or logical volume, so create a swap logical volume, then you can extend it later if necessary or create a swapfile and move over to that.
-Ross
Michael Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Hey,
So I copied the example you provided and it still failed in the same way as all my earlier tests.
Our normal kickstarts cover all the things you suggested so we have and most others have not see this issue yet.
But there definitely appears to be a problem with LVM being made available during the install phase after it was created and before the formatting takes place.
Adding a swap section to the lvm setup seems to be like a work around or requirement for now.
Michael Gale wrote:
Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
So I have created another kickstart that I believe should be correct and it fails the same way with the same problems:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part swap --size=1000 part pv.os --size=8000 --grow --maxsize=8000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
How about:
--snip-- zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 --asprimary part swap --size=1000 part pv.os --size=8000 volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow --snip--
I removed the '--grow' and '--maxsize' options from the pv.os partition setup as you know what the size you want it to be, there is no need for these. I also moved the --asprimary option to the /boot partition, really only /boot needs to be --asprimary, and then again you really only need that if you have existing partitions on disk that are being preserved, which with 'clearpart --all' you won't have.
I would put swap into the volgroup though as there is no need for a completely separate swap partition anymore. In fact swap files work just as well these days as swap partitions or swap logical volumes, but anaconda still needs a swap partition or logical volume, so create a swap logical volume, then you can extend it later if necessary or create a swapfile and move over to that.
Michael Ross S. W. Walker wrote:
Michael Gale wrote:
Hey,
Can anyone tell me why option 1 works and option 2 fails ? I know I need swap and such, however in trouble shooting this issue I trimmed down my config.
It fails on trying to format my logical volume, because the mount point does not exist (/dev/volgroup/logvol)
It seems that with option 2, the partitions are created and LVM is setup correctly. However the volgroup / logvolume was not made active, so my /dev/volgroup/logvol did not exist.
Running `lvm lvchange -a -y pathname` from with in the shell after anaconda failed made the volgroup / logvol active. Which would allow the format command to complete.
Option 1: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol swap --fstype swap --name=os_swap_logvol --vgname=os_volgroup01 --recommended logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
Option 2: zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=100 part pv.os --size=10000 --grow --maxsize=10000 --asprimary volgroup os_volgroup01 pv.os logvol / --fstype ext3 --name=os_root --vgname=os_volgroup01 --size=1024 --grow
I do this through kickstart and here's what I use:
bootloader --location=mbr zerombr yes clearpart --linux --initlabel --drives=sda part /boot --fstype ext3 --size=128 --ondisk=sda --asprimary part pv.0 --size=0 --grow --ondisk=sda volgroup CentOS --pesize=32768 pv.0 logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=16384 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048
I haven't tried without swap and I think anaconda expects there to be a swap definition in kickstart, so that might be it, lv wasn't activated because swap was missing.
Best I can think of.
Hey,
So I copied the example you provided and it still failed in the same way as all my earlier tests.
Our normal kickstarts cover all the things you suggested so we have and most others have not see this issue yet.
But there definitely appears to be a problem with LVM being made available during the install phase after it was created and before the formatting takes place.
Adding a swap section to the lvm setup seems to be like a work around or requirement for now.
Weird, I guess maybe it calls for a bug report to be filed for anaconda.
I would probably just setup swap on LVM anyways if I was using LVM, so it's not a show stopper, but it seems with anaconda right now if you are doing kickstart and using LVM then swap needs to be on LVM.
Can you try this while you have your test system working:
--snip-- bootloader --location=mbr zerombr yes clearpart --all --initlabel part /boot --fstype ext3 --size=128 --asprimary part swap --fstype swap --size=4096 part pv.os --size=0 --grow volgroup CentOS pv.os logvol / --fstype ext3 --name=root --vgname=CentOS --size=4096 --grow --maxsize=8192 logvol swap --fstype swap --name=swap --vgname=CentOS --size=1024 --grow --maxsize=2048 --snip--
Oh, oh, I just saw the problem as I was typing.
part swap --fstype swap --size-4096
Originally you had:
part swap --size=1000
And was missing '--fstype swap' that just might be the problem!
-Ross
______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.
-
Michael Gale -
Ross S. W. Walker