Michael Rock napsal(a):
all-generic-ide irqpoll
Without irqpoll it just hangs and without all-generic-ide it get a kernel panic. So I still need both to recognize the disk and continue
booting.
Michael, I have tested 8.1.14 ICH9 x86_64 version and it's
kring fine. For sure
im right now uploading full DVD isos. I did not want
to :o( due due to
bandwidth bud I have to now. Once I have 8.1.15
kernels ready I will
publish updated version. Please send the mobo ID for
me to read about
the chipset. I do test ICH9 Centos on this mobo MSI P35 Neo-FI
http://www.hardware.info/en-UK/productdb/bGRkZZiUmJHK/viewproduct/MSI_P35_Ne...
Regards, David
I had to get a workstation setup right away for the P5KC so I just ended up using Fedora Test 8 which handled it no problem. (so should be good for about a year)
The P5K-VM I was able to setup as AHCI in bios which is why I was able to get as far as I did. But there was no setting to do the same with the P5KC even though I had the latest BIOS.
I still need to get the P5K-VM setup and since it is a server I would still like to use Centos. Are the new DVD's ready yet?
-- Mike
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Michael Rock napsal(a):
I still need to get the P5K-VM setup and since it is a server I would still like to use Centos. Are the new DVD's ready yet?
-- Mike
Well, I have tried to recreate ISOs, with delta files. Everything's fine: ... zsh.x86_64: copying unchanged payload zsh-html.x86_64: copying unchanged payload iso sucessfully re-created, md5sum: 73765c4be8d5bebbce7a6e894370d031
Recreated ISO file is the very same as original ICH9 ISO. I have published the full DVD too.
As to new kernel-2.6.18-8.1.15, I'm in process of building a new i686 and x86_64 version but it really takes a lot of time. I do have x86_64 rpms ready now and I'm trying to build i686. I'm building i686 version for the fourth time. Every time it ended with segmentation fault under kernel-2.6.18-8.1.15, so now I'm trying to build under kernel-2.6.18-8.1.14 now. I seems to me that kernel-2.6.18-8.1.15 has some problems under VMWare.
I'd like to point that I'm trying my best and it takes long time, even that I have dual xeon and dual opteron machines. I have to build about 12 kernel RPMS, prepare DVD content, run buildinstall, make isos, run makedeltaiso, and etc. It really takes very long time, not my time but machine time. Regards, David
David Hrbác wrote:
Michael Rock napsal(a):
I still need to get the P5K-VM setup and since it is a server I would still like to use Centos. Are the new DVD's ready yet?
-- Mike
Well, I have tried to recreate ISOs, with delta files. Everything's fine: ... zsh.x86_64: copying unchanged payload zsh-html.x86_64: copying unchanged payload iso sucessfully re-created, md5sum: 73765c4be8d5bebbce7a6e894370d031
Recreated ISO file is the very same as original ICH9 ISO. I have published the full DVD too.
As to new kernel-2.6.18-8.1.15, I'm in process of building a new i686 and x86_64 version but it really takes a lot of time. I do have x86_64 rpms ready now and I'm trying to build i686. I'm building i686 version for the fourth time. Every time it ended with segmentation fault under kernel-2.6.18-8.1.15, so now I'm trying to build under kernel-2.6.18-8.1.14 now. I seems to me that kernel-2.6.18-8.1.15 has some problems under VMWare.
I'd like to point that I'm trying my best and it takes long time, even that I have dual xeon and dual opteron machines. I have to build about 12 kernel RPMS, prepare DVD content, run buildinstall, make isos, run makedeltaiso, and etc. It really takes very long time, not my time but machine time. Regards, David
David,
WELCOME TO MY WORLD :D
(Hey, are the new foobar packages done, how about the xwyz packages)
Thanks, JOhnny Hughes
On Sat, 2007-10-27 at 04:47 -0500, Johnny Hughes wrote:
David Hrbác wrote:
Michael Rock napsal(a):
<snip>
I'd like to point that I'm trying my best and it takes long time, even that I have dual xeon and dual opteron machines. I have to build about 12 kernel RPMS, prepare DVD content, run buildinstall, make isos, run makedeltaiso, and etc. It really takes very long time, not my time but machine time. Regards, David
David,
WELCOME TO MY WORLD :D
(Hey, are the new foobar packages done, how about the xwyz packages)
More importantly, is there a release date for the foobar-2.0 which includes the backports currently in alpha in the upstream's 2nd release from now?
I really need those as I bought a new mobo that has the latest prrrth chipset that I want to run my enterprise server on... we bought it and it's in-house now awaiting an OS with these updates. We anticipate it should be stable for 5 years or so.
Thanks, JOhnny Hughes
<snip sig stuff after Johnny-5>
-- Bill
-
David Hrbác( -
Johnny Hughes -
Michael Rock -
William L. Maltby