Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it?
This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card. In particular, I'm trying to mount a firewire external DVD device.
Lspsi shows the following so I *thought* the kernel found the card:
[ritz@localhost ~]$ /sbin/lspci 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:01.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID 02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 02:05.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08) 03:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 08) 03:06.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
Any suggestions would be much appreciated.
On Mon, 2006-09-18 at 15:24 -0400, chrism@imntv.com wrote:
Assuming I have a firewire card with a supported chipset, is there anything special I need to do in order for the kernel to recognize the card? Shouldn't kudzu "wake up" and configure the card when I boot up after installing it?
This is a brand spanking new 4.4 system and a supported Agere chipset firewire card. I'm having trouble tickling devices connected to the card. In particular, I'm trying to mount a firewire external DVD device.
Lspsi shows the following so I *thought* the kernel found the card:
[ritz@localhost ~]$ /sbin/lspci 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:01.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID 02:05.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 02:05.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10) 03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 03:04.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 03:05.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08) 03:05.1 Input device controller: Creative Labs SB Live! Game Port (rev 08) 03:06.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
Firewire is not turned on in the standard RHEL kernel. It is on in the CentOSPlus kernel.
Johnny Hughes wrote:
03:06.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
Firewire is not turned on in the standard RHEL kernel. It is on in the CentOSPlus kernel.
Ah, that explains it. I've never used the non-default kernel. Is this just a matter of firing up yum or yumex and installing a specific kernel? In the centosplus repo I see one for hugemem, xfs, etc. Which one should I choose?
Sorry for the n00bish question.
Cheers,
Chris
chrism@imntv.com wrote:
Johnny Hughes wrote:
03:06.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61)
Firewire is not turned on in the standard RHEL kernel. It is on in the CentOSPlus kernel.
Ah, that explains it. I've never used the non-default kernel. Is this just a matter of firing up yum or yumex and installing a specific kernel? In the centosplus repo I see one for hugemem, xfs, etc. Which one should I choose?
Just a quick follow-up that the problem was operator error. :) I've now figured out how to use yumex, updated my kernel to the plus version and my firewire devices are now working.
Thanks to everyone who responded by email.
Cheers,
Hi My People,
I am looking for the best tool or method for Linux authentication like Ms Active Directory:
Scenarios
1. Samba PDC for Linux Clients and Windows Xp Status: (Server Centos OS 4.3 Samba 3.023 Setup Ready, Windows Clients Ready can logon, Linux Clients Centos 4.3, Ubuntus 6,06 and Suse 10. Fail to logon error: Utils/net_rpc_join.c:net_rpc_join_newstyle(295) Error setting trust account password: NT_STATUS_ACCESS_DENIED Unable to join domain mydomain.com.ve
2. Samba PDC with Ldap Comments about.
3. Samba with Fedora Directory Status: (The Same) I will revise it because show easy talk with Ms Active Directory, I have already setup Fedora Directory and I will join samba with it.
4. Your recommendations
So really we want logon our linux clients in our linux PDC.
Best regards
Jose Perales Grid Systems
- Your recommendations
http://theendlessnow.com/ten/SSO/Paper
On Mon, 2006-09-18 at 18:46 -0400, Jim Perrin wrote:
- Your recommendations
Jim's link looks nice ... here is another option.
I highly recommend the below guide. It has LDAP enabled samba and works well (read everything to understand the working of Samba ... then do the LDAP section.)
http://us2.samba.org/samba/docs/man/Samba-Guide/
(This is not Active Directory but NT type domains, as ADS is not supported in samba-3)
Thanks, Johnny Hughes
-
chrism＠imntv.com -
Jim Perrin -
Johnny Hughes -
Jose Perales ＠ Grid System