I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
True. So, where do you place the bridge, in the VE or in the host itself?
Timo
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
In the host
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:50 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
True. So, where do you place the bridge, in the VE or in the host itself?
Timo
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked
before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
In the host
Could you post you appropriate ifcfg scripts?
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:50 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
True. So, where do you place the bridge, in the VE or in the host itself?
Timo
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked
before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
Ifcfg-eth1
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
DEVICE=eth1
HWADDR=00:50:FC:F9:84:CB
ONBOOT=yes
DHCP_HOSTNAME=vps.mjw.se
BRIDGE=br0
Ifcfg-br0 [br0]
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=dhcp
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:54 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
In the host
Could you post you appropriate ifcfg scripts?
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:50 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
True. So, where do you place the bridge, in the VE or in the host itself?
Timo
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On
Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked
before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 03/09/2010 10:59, mattias wrote:
Ifcfg-eth1
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
DEVICE=eth1
HWADDR=00:50:FC:F9:84:CB
ONBOOT=yes
DHCP_HOSTNAME=vps.mjw.se
BRIDGE=br0
Ifcfg-br0 [br0]
ONBOOT=yes
TYPE=Bridge
BOOTPROTO=dhcp
Can you try adding the following line to the ifcfg-br0 file?
PHYSICAL=eth1
That seems to be the only difference I can find from our working config.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:54 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
In the host
Could you post you appropriate ifcfg scripts?
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:50 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
For example 2.6.18-194.8.1.el5.028stab070.4
This is the openvz kernel
True. So, where do you place the bridge, in the VE or in the host itself?
Timo
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Timo Schoeler Sent: Friday, September 03, 2010 11:43 AM To: CentOS mailing list Subject: Re: [CentOS] bridge
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Hi,
so, you installed a fresh CentOS 5.5 and then added the OpenVZ repo from
their site?
Which kernel did you try (of which you say it lacks bridge support)?
Regards,
Timo
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On 03/09/2010 10:41, mattias wrote:
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Can you try to run "modprobe bridge" before you start networking?
I have seen that error before, I just can't remember how I fixed it.
Alredy solved There whas a configure error in the ifcfg-br0 file
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Gabriel Tabares Sent: Friday, September 03, 2010 6:22 PM To: centos@centos.org Subject: Re: [CentOS] bridge
On 03/09/2010 10:41, mattias wrote:
I try to use a bridge with openvz but get the following Bridging Support is not available in this kernel This message are in all kernels i tryed from the centos yum repo On a frech 5.5 It has worked before With the same install i have used
Can you try to run "modprobe bridge" before you start networking?
I have seen that error before, I just can't remember how I fixed it.
_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
Gabriel Tabares -
mattias -
Timo Schoeler