Hello guys,
I have two ISP's connected to my router. One via eth2, second one via ADSL modem, with ppoe doing on my Centos 5 .
The problem I have is, that when ADSL fails , interface ppp0 is removed. This also removes my static routes configured for this interface. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears.
This is my ifcfg-ppp0 config :
USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=yes PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=NONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=no SYNCHRONOUS=no ETH=eth0 PROVIDER=DSLppp0 USER=O2 PEERDNS=no DEMAND=no PERSIST=yes
As you can see, I have PERSIST=yes , which according to documentation should keep ppp0 interface ON. Well it does but only for a couple of seconds. I suspect this to be other parameters problem (CONNECT_TIMEOUT or PPPOE_TIMEOUT).
Can you please help me with this?
Thank you in advance!
David
On Sun, 2010-01-10 at 16:54 +0100, David Hláčik wrote:
Hello guys,
I have two ISP's connected to my router. One via eth2, second one via ADSL modem, with ppoe doing on my Centos 5 .
The problem I have is, that when ADSL fails , interface ppp0 is removed. This also removes my static routes configured for this interface. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears.
This is my ifcfg-ppp0 config :
USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=yes PIDFILE=/var/run/pppoe-adsl.pid FIREWALL=NONE PING=. PPPOE_TIMEOUT=80 LCP_FAILURE=3 LCP_INTERVAL=20 CLAMPMSS=1412 CONNECT_POLL=6 CONNECT_TIMEOUT=60 DEFROUTE=no SYNCHRONOUS=no ETH=eth0 PROVIDER=DSLppp0 USER=O2 PEERDNS=no DEMAND=no PERSIST=yes
As you can see, I have PERSIST=yes , which according to documentation should keep ppp0 interface ON. Well it does but only for a couple of seconds. I suspect this to be other parameters problem (CONNECT_TIMEOUT or PPPOE_TIMEOUT).
Can you please help me with this?
Thank you in advance!
David
--- Maybe not really that since you have it set to "yes". Check /var/log/messages for Authentication Problems, like CHAP, MSCHAP or Tokin ID Session. I would really get a router to do the balancing not the OS it self.
John
-
David Hláčik -
JohnS