Or have you another good way to install the driver because the problem is that if the driver is not in the kernel the raid will not boot from them or?
Two words: initrd image.
Google can help you out quite easily with creating one.
Regards,
-Joshua
In /boot i have the initrd-2.4.21-27.0.2.ELsmp.img But what i must do exactly now?
-----Ursprüngliche Nachricht----- Von: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] Im Auftrag von Hirsh, Joshua Gesendet: Freitag, 25. Februar 2005 21:05 An: 'CentOS discussion and information list' Betreff: RE: [Centos] How to install 3ware Modules?
Or have you another good way to install the driver because the problem is that if the driver is not in the kernel the raid will not boot from them or?
Two words: initrd image.
Google can help you out quite easily with creating one.
Regards,
-Joshua _______________________________________________ CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
mv initrd-2.4.21-27.0.2.ELsmp.img initrd-2.4.21-27.0.2.ELsmp.img_orig
copy 3w-9xxx.o for your system to /lib/modules/2.4.21-27.0.2.ELsmp/kernel/drivers/scsi
make sure there is an entry in /etc/modules.conf like this:
alias scsi_hostadapter1 3w-9xxx
The entry: scsi_hostadapter1 in the above may be different....
run mkinitrd /boot/initrd-2.4.21-27.0.2.ELsmp.img 2.4.21-27.0.2.Elsmp
Now you have the driver install done try it by rebooting and see if the 9500 is mounted at boot time.
Seth Bardash
Integrated Solutions and Systems
719-495-5866
Failure can not cope with perseverance!
-----Original Message----- From: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Sven Sent: Friday, February 25, 2005 1:51 PM To: 'CentOS discussion and information list' Subject: AW: [Centos] How to install 3ware Modules?
In /boot i have the initrd-2.4.21-27.0.2.ELsmp.img But what i must do exactly now?
-----Ursprüngliche Nachricht----- Von: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] Im Auftrag von Hirsh, Joshua Gesendet: Freitag, 25. Februar 2005 21:05 An: 'CentOS discussion and information list' Betreff: RE: [Centos] How to install 3ware Modules?
Or have you another good way to install the driver because
the problem
is that if the driver is not in the kernel the raid will
not boot from
them or?
Two words: initrd image.
Google can help you out quite easily with creating one.
Regards,
-Joshua _______________________________________________ CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
Thanks Seth
But another question scsi_hostadapter1 if an scsi_hostadapter exist? And are any changes in the config-2.4.21-27.0.2.Elsmp required or not?
-----Ursprüngliche Nachricht----- Von: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] Im Auftrag von Seth Bardash Gesendet: Freitag, 25. Februar 2005 23:03 An: 'CentOS discussion and information list' Betreff: RE: [Centos] How to install 3ware Modules?
mv initrd-2.4.21-27.0.2.ELsmp.img initrd-2.4.21-27.0.2.ELsmp.img_orig
copy 3w-9xxx.o for your system to /lib/modules/2.4.21-27.0.2.ELsmp/kernel/drivers/scsi
make sure there is an entry in /etc/modules.conf like this:
alias scsi_hostadapter1 3w-9xxx
The entry: scsi_hostadapter1 in the above may be different....
run mkinitrd /boot/initrd-2.4.21-27.0.2.ELsmp.img 2.4.21-27.0.2.Elsmp
Now you have the driver install done try it by rebooting and see if the 9500 is mounted at boot time.
Seth Bardash
Integrated Solutions and Systems
719-495-5866
Failure can not cope with perseverance!
-----Original Message----- From: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] On Behalf Of Sven Sent: Friday, February 25, 2005 1:51 PM To: 'CentOS discussion and information list' Subject: AW: [Centos] How to install 3ware Modules?
In /boot i have the initrd-2.4.21-27.0.2.ELsmp.img But what i must do exactly now?
-----Ursprüngliche Nachricht----- Von: centos-bounces@caosity.org [mailto:centos-bounces@caosity.org] Im Auftrag von Hirsh, Joshua Gesendet: Freitag, 25. Februar 2005 21:05 An: 'CentOS discussion and information list' Betreff: RE: [Centos] How to install 3ware Modules?
Or have you another good way to install the driver because
the problem
is that if the driver is not in the kernel the raid will
not boot from
them or?
Two words: initrd image.
Google can help you out quite easily with creating one.
Regards,
-Joshua _______________________________________________ CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
-- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005
_______________________________________________ CentOS mailing list CentOS@caosity.org http://lists.caosity.org/mailman/listinfo/centos
-
Hirsh, Joshua -
Seth Bardash -
Sven