I used to be able to modify my modules.conf file so that certain NIC cards would load specific drivers.
Has this changed in kernel 2.6
i.e. <snip /etc/modules.conf>
alias eth0 e100 alias eth1 e1000
</snip>
It used to be that I could reverse this order and eth0 would be the GigE card.
Robin Mordasiewicz wrote:
I used to be able to modify my modules.conf file so that certain NIC cards would load specific drivers.
Has this changed in kernel 2.6
i.e. <snip /etc/modules.conf>
alias eth0 e100 alias eth1 e1000
</snip>
It used to be that I could reverse this order and eth0 would be the GigE card.
on CentOS 4 you need to look at the /etc/modprobe.conf file, there is no /etc/modules.conf
Always a good idea to look at the docs....
http://www.centos.org/docs/4/html/rhel-sag-en-4/ch-kernel-modules.html
On Thu, 28 Jul 2005, Karanbir Singh wrote:
Robin Mordasiewicz wrote:
I used to be able to modify my modules.conf file so that certain NIC cards would load specific drivers. Has this changed in kernel 2.6
i.e. <snip /etc/modules.conf> alias eth0 e100 alias eth1 e1000
</snip>
It used to be that I could reverse this order and eth0 would be the GigE card.
on CentOS 4 you need to look at the /etc/modprobe.conf file, there is no /etc/modules.conf Always a good idea to look at the docs.... http://www.centos.org/docs/4/html/rhel-sag-en-4/ch-kernel-modules.html
tx. that works now.
On Thu, July 28, 2005 4:21 pm, Robin Mordasiewicz said:
I used to be able to modify my modules.conf file so that certain NIC cards would load specific drivers.
Has this changed in kernel 2.6
i.e. <snip /etc/modules.conf>
alias eth0 e100 alias eth1 e1000
</snip>
It used to be that I could reverse this order and eth0 would be the GigE card.
The name of the file has changed to modprobe.conf
-
Johnny Hughes -
Karanbir Singh -
Robin Mordasiewicz