Hi,
I've got a couple of servers that are running WBEL4 that I would like to upgrade to CentOS4. I noticed that there is a FAQ which explains how to upgrade WBEL3 to CentOS3, but haven't found anything similar for WBEL4.
Are the instructions for the WBEL3 upgrade the same for WBEL4? Should I be doing something else instead?
Any help would be greatly appreciated.
Thanks,
Eric
Eric B. spake the following on 9/7/2007 10:03 PM:
Hi,
I've got a couple of servers that are running WBEL4 that I would like to upgrade to CentOS4. I noticed that there is a FAQ which explains how to upgrade WBEL3 to CentOS3, but haven't found anything similar for WBEL4.
Are the instructions for the WBEL3 upgrade the same for WBEL4? Should I be doing something else instead?
Any help would be greatly appreciated.
Thanks,
Eric
It should be similar. Just try substituting "4" for "3". You will find many converts from Whitebox here. Whitebox was great, but I think John has never had the time to get back into things since Katrina. I hear that the infrastructure in Louisiana is still very unstable.
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
---- hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
Craig
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
Craig
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Thu, 2007-09-13 at 23:12 -0400, Manuel E. Chavez Manzano wrote:
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
---- yum update is not an easy job...it takes a lot of processing power and memory. You don't have that much memory and the Celeron is only OK as a processor
Craig
Thanks then I have ti assume that the problem is the processor, I mean that it's not enought. thanks a lot see you
El jue, 13-09-2007 a las 20:41 -0700, Craig White escribió:
On Thu, 2007-09-13 at 23:12 -0400, Manuel E. Chavez Manzano wrote:
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
yum update is not an easy job...it takes a lot of processing power and memory. You don't have that much memory and the Celeron is only OK as a processor
Craig
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
And memory, you should consider adding more.
-matt
On 9/13/07, Manuel E. Chavez Manzano manny@cmc.cfg.sld.cu wrote:
Thanks then I have ti assume that the problem is the processor, I mean that it's not enought. thanks a lot see you
El jue, 13-09-2007 a las 20:41 -0700, Craig White escribió:
On Thu, 2007-09-13 at 23:12 -0400, Manuel E. Chavez Manzano wrote:
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
yum update is not an easy job...it takes a lot of processing power and memory. You don't have that much memory and the Celeron is only OK as a processor
Craig
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-- "Nuestra recompensa se encuentra en el esfuerzo y no en el resultado. Un esfuerzo total es una victoria completa". Mahatma Gandhi (@ @) |------o00o-(_)-o00o----------| |Manuel Enrique Chávez Manzano| |manuel864@gmail.com | |manny@cmc.cfg.sld.cu | |GNU/LINUX User | |#424754 | |Usando CentOS 5 | |-------ooo--ooo--------------|
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Thu, 2007-09-13 at 23:57 -0400, Manuel E. Chavez Manzano wrote:
Thanks then I have ti assume that the problem is the processor, I mean that it's not enought. thanks a lot see you
El jue, 13-09-2007 a las 20:41 -0700, Craig White escribió:
On Thu, 2007-09-13 at 23:12 -0400, Manuel E. Chavez Manzano wrote:
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
yum update is not an easy job...it takes a lot of processing power and memory. You don't have that much memory and the Celeron is only OK as a processor
---- 256 MB RAM is suggested minimum and likely to cause your machine to use swap more and interruptions in streaming process is likely while system is swapping memory to/from hard disk
Craig
On Friday 14 September 2007 15:41:41 Craig White wrote:
On Thu, 2007-09-13 at 23:57 -0400, Manuel E. Chavez Manzano wrote:
Thanks then I have ti assume that the problem is the processor, I mean that it's not enought. thanks a lot see you
El jue, 13-09-2007 a las 20:41 -0700, Craig White escribió:
On Thu, 2007-09-13 at 23:12 -0400, Manuel E. Chavez Manzano wrote:
I mean when i do it locally, and even from command line, and I always do it as a user, and it isn't shows any error, and example when I run yum update when yum starts downloading headers, mplayer stop for a secund and start again, and that happens averytime yum start downloading a header, and when download a packeage, but when the download is on curse mplayer plays normally Do you understad what I mean ???? sorry but I'm not very good writing, I speak spanish
El jue, 13-09-2007 a las 19:52 -0700, Craig White escribió:
On Thu, 2007-09-13 at 22:43 -0400, Manuel E. Chavez Manzano wrote:
I have installed CentOS 5 with mplayer -1.0-0.34. from de dag's repos,everythings going well while I'm just listening music ando doing any easy job, but when I run yum the mplayer stops for a while and start again, the sames happens with xmms. I have a celeron 2.9ghz and 256mb ram I want to know why is this happening ?
hurry up and grab a chair...
try launching xmms/mplayer (as user) from command line instead of clicking because starting from a command line might give some useful information in error out.
I find that if I am watching video or listening to audio via the Internet, a stoppage generally means that it lost contact with the streaming server
yum update is not an easy job...it takes a lot of processing power and memory. You don't have that much memory and the Celeron is only OK as a processor
256 MB RAM is suggested minimum and likely to cause your machine to use swap more and interruptions in streaming process is likely while system is swapping memory to/from hard disk
Craig
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
I get a similar problem when watching Tv and doing other memory intensive stuff. The sound and picture start to stutter. If I close some programs down it sorts itself out. This is on a 3 GHz AMD (32Bit) with 1Gb of Ram on a dual memory channel board. Basically I'm pushing the memory / processor to its limit. 256Mb of RAM is suggested MINIMUM required. If you can afford to invest in some more RAM you will find its more cost effective than up gradeing your CPU, and having more RAM will allow mplayer to buffer more of the sound file that its playing.
On Sat, 2007-09-08 at 01:03 -0400, Eric B. wrote:
Hi,
I've got a couple of servers that are running WBEL4 that I would like to upgrade to CentOS4. I noticed that there is a FAQ which explains how to upgrade WBEL3 to CentOS3, but haven't found anything similar for WBEL4.
Are the instructions for the WBEL3 upgrade the same for WBEL4? Should I be doing something else instead?
Any help would be greatly appreciated.
The RHEL-5 to CentOS-5 advice quoted on http://wiki.centos.org/HowTos/MigrationGuide should be applicable:
"All that you should need to do is install centos-release, remove redhat-release rpms and just yum update the machine, which should bring in all packages changed by CentOS ( since they will have a slightly higher E-V-R )." - per KaranbirSingh on centos-list
Phil
-
Craig White -
Eric B. -
John Bowden -
Manuel E. Chavez Manzano -
Matt Shields -
Phil Schaffner -
Scott Silva