Does anyone here use a Samba4 setup for single sign-on for MS_Win workstations and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication? We are experimenting with replacing our existing Microsoft domain controllers with Samba4 based controllers and are contemplating moving all authentication for all our systems, Microsoft and CentOS based, over to Samba when, or if, this replacement successfully completes.
Does anyone have any references for using CentOS with Samba domain controllers that they can recommend? I have found some but the few I have found tend to be Samba3 specific.
----- Original Message ----- | Does anyone here use a Samba4 setup for single sign-on for MS_Win | workstations | and CentOS-6 boxes? Does anyone here use it for imap and/or smtp | authentication? We are experimenting with replacing our existing | Microsoft | domain controllers with Samba4 based controllers and are | contemplating moving | all authentication for all our systems, Microsoft and CentOS based, | over to | Samba when, or if, this replacement successfully completes. | | Does anyone have any references for using CentOS with Samba domain | controllers | that they can recommend? I have found some but the few I have found | tend to | be Samba3 specific. | | -- | *** E-Mail is NOT a SECURE channel *** | James B. Byrne mailto:ByrneJB@Harte-Lyne.ca | Harte & Lyne Limited http://www.harte-lyne.ca | 9 Brockley Drive vox: +1 905 561 1241 | Hamilton, Ontario fax: +1 905 561 0757 | Canada L8E 3C3 | | _______________________________________________ | CentOS mailing list | CentOS@centos.org | http://lists.centos.org/mailman/listinfo/centos |
I would have to ask why you're doing such a thing in the first place? You have a perfectly good working Active Directory setup, that people are already familiar with, I suspect with existing MS clients which integrate fully (and "properly") and you want to replace it with a Samba based setup. Unless you have a relatively simple setup, I would say don't change. However, if you are looking to move to something else, then do that. Why fix to Samba? Why not go with a full on Kerberos/LDAP environment?
FWIW, we use CentOS 6 with Active Directory Authorization. Things have worked fine for us for about 1 year. It took a VERY long time to get setup and working, but it is now.
-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of James B. Byrne Sent: den 28 januari 2014 18:13 To: centos@centos.org Subject: [CentOS] Single sign-on for CentOS-6
Does anyone here use a Samba4 setup for single sign-on for MS_Win workstations and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication? We are experimenting with replacing our existing Microsoft domain controllers with Samba4 based controllers and are contemplating moving all authentication for all our systems, Microsoft and CentOS based, over to Samba when, or if, this replacement successfully completes.
Does anyone have any references for using CentOS with Samba domain controllers that they can recommend? I have found some but the few I have found tend to be Samba3 specific.
That is so cool!
Could you keep us updated on your progress on this? Thanks.
FWIW, while I dabbled with Samba3 I never could get it to work properly with our AD. Turns out, the AD was set to a security model Samba3 couldn't handle.
Has this been resolved with Samba4?
-- //Sorin
On Tue, 28 Jan 2014, James B. Byrne wrote:
Does anyone here use a Samba4 setup for single sign-on for MS_Win workstations and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication?
Yes to all of these, using sssd on CentOS, for about 18 months now. It works very well. We have two DC's on CentOS, no Windows DC's. No winbind. I can post the sssd.conf if anyone is interested.
Steve
On Thu, 30 Jan 2014 09:13:18 -0500 (EST) Steve Thompson smt@vgersoft.com wrote:
On Tue, 28 Jan 2014, James B. Byrne wrote:
Does anyone here use a Samba4 setup for single sign-on for MS_Win workstations and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication?
Yes to all of these, using sssd on CentOS, for about 18 months now. It works very well. We have two DC's on CentOS, no Windows DC's. No winbind. I can post the sssd.conf if anyone is interested.
Steve _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Please post sssd.conf.
BR, Bob
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee and want to install netcdf file and ncview but it gives some OS error
On Thu, Jan 30, 2014 at 7:57 PM, Bob Marcan bob.marcan@gmail.com wrote:
On Thu, 30 Jan 2014 09:13:18 -0500 (EST) Steve Thompson smt@vgersoft.com wrote:
On Tue, 28 Jan 2014, James B. Byrne wrote:
Does anyone here use a Samba4 setup for single sign-on for MS_Win
workstations
and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication?
Yes to all of these, using sssd on CentOS, for about 18 months now. It works very well. We have two DC's on CentOS, no Windows DC's. No winbind. I can post the sssd.conf if anyone is interested.
Steve _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Please post sssd.conf.
BR, Bob _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Am 30.01.2014 15:45, schrieb dip patel:
Please do not hijack other threads by replying to other list mails with a new topic. Thanks.
And please no top-posting and full quotation.
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee and want to install netcdf file and ncview but it gives some OS error
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee and want to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL packager and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library is also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee and
want
to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL packager and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want
to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke Andreas.Reschke@mahle.comwrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want
to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want
to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
Really? Really????
j/h
On 1/30/2014 7:32 AM, dip patel wrote:
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel: > i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want
> to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
centos-bounces@centos.org schrieb am 30.01.2014 16:32:16:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:32 Betreff: Re: [CentOS] Antwort: Re: netcdf Gesendet von: centos-bounces@centos.org
or i m also want to run cent os with my window 8 socan u please provide
a
direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com
wrote:
it can not b possible cause i m working in ISRO - PRL and it had a
348
node cluster and that all system is already running on Cent os so it
is not
possible to change whole system due to this single problem my head
doesnt
allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure
the
netcdf file so it fives x lib developer is missing and some x11
library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
> i m working in PHYSICAL RESEARCH LABORATORY as a engineer
trainee
and
want
> to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it.
If you
use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need
if
someone else has this problem and searches for support?" Then
provide
this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
It's a joke, or isnt it?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke
Google is your friend (not that you really need in this instance).
Sent from my iPhone
On Jan 30, 2014, at 10:32, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
> i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want
> to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
ohkkk and what about netcdf ???????
On Thu, Jan 30, 2014 at 9:08 PM, yoursurrogategod@gmail.com < yoursurrogategod@gmail.com> wrote:
Google is your friend (not that you really need in this instance).
Sent from my iPhone
On Jan 30, 2014, at 10:32, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please provide
a
direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com
wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is
not
possible to change whole system due to this single problem my head
doesnt
allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11
library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz: > Am 30.01.2014 15:45, schrieb dip patel:
>> i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want >> to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If
you
use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
https://www.unidata.ucar.edu/software/netcdf/docs/netcdf-tutorial.html
http://www.unidata.ucar.edu/software/thredds/current/netcdf-java/tutorial/
http://www.ems.psu.edu/~young/meteo473/lecture_netcdf_matlab.htm
http://werc.engr.uaf.edu/~ken/doc/netcdf-doc/netcdf-tutorial/Documentation.h...
http://en.wikipedia.org/wiki/RTFM
I wish you well - my good friend from that wonderful little place down there in the Sub-Continent of SouthEast Asia that blesses us with a billion of your brothers and sisters.
ROCK ON!!!!
JJ Hass
On 1/30/2014 7:39 AM, dip patel wrote:
ohkkk and what about netcdf ???????
On Thu, Jan 30, 2014 at 9:08 PM, yoursurrogategod@gmail.com < yoursurrogategod@gmail.com> wrote:
Google is your friend (not that you really need in this instance).
Sent from my iPhone
On Jan 30, 2014, at 10:32, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please provide
a
direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com
wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is
not
possible to change whole system due to this single problem my head
doesnt
allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11
library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
> Am 30.01.2014 16:03, schrieb Alexander Dalloz: >> Am 30.01.2014 15:45, schrieb dip patel: >>> i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
> want >>> to install netcdf file and ncview but it gives some OS error > Sorry, I did sent my previous message too early. > > Your problem description lacks a lot of detail. > > Where do you take netcdf from? The EPEL repository provides it. If
you
> use that package and binaries fail, you should contact the EPEL
packager
> and provide a bug report. > > "some OS error" is very unspecific. > > Start by asking yourself: "What kind of information would I need if > someone else has this problem and searches for support?" Then provide > this information actively. > > Kind regards > > Alexander > > _______________________________________________ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Thu, 2014-01-30 at 21:09 +0530, dip patel wrote:
ohkkk and what about netcdf ???????
Mr Patel,
Please omit (= delete) all unnecessary parts of previous postings. You included 143 lines of previous postings. It is excessive for your one line reply.
Thank you.
... release notes and manuals, too -- always good to hear what the 'prominent Linux vendor in 'North America' is thinking --
ah, the pleasure of knowledge.. I'm surprised at the questions here .. most can be solved with that Google search. don't have to be technical now.. in fact, most technical people aren't. sad. get those damn iPod plugs out of your ears, jr.!
/jh
On 1/30/2014 7:38 AM, yoursurrogategod@gmail.com wrote:
Google is your friend (not that you really need in this instance).
Sent from my iPhone
On Jan 30, 2014, at 10:32, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz: > Am 30.01.2014 15:45, schrieb dip patel: >> i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
want >> to install netcdf file and ncview but it gives some OS error Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL
packager
and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
okkkk
On Thu, Jan 30, 2014 at 9:10 PM, Jeffrey Hass xaccusa@gmail.com wrote:
... release notes and manuals, too -- always good to hear what the 'prominent Linux vendor in 'North America' is thinking --
ah, the pleasure of knowledge.. I'm surprised at the questions here .. most can be solved with that Google search. don't have to be technical now.. in fact, most technical people aren't. sad. get those damn iPod plugs out of your ears, jr.!
/jh
On 1/30/2014 7:38 AM, yoursurrogategod@gmail.com wrote:
Google is your friend (not that you really need in this instance).
Sent from my iPhone
On Jan 30, 2014, at 10:32, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please
provide a
direct download link for centos 6.5 or ftp link for download it?
On Thu, Jan 30, 2014 at 9:00 PM, dip patel dip.patel6555@gmail.com
wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it
is not
possible to change whole system due to this single problem my head
doesnt
allow to me for this
On Thu, Jan 30, 2014 at 8:56 PM, Andreas Reschke < Andreas.Reschke@mahle.com> wrote:
centos-bounces@centos.org schrieb am 30.01.2014 16:20:47:
Von: dip patel dip.patel6555@gmail.com An: CentOS mailing list centos@centos.org Datum: 30.01.2014 16:21 Betreff: Re: [CentOS] netcdf Gesendet von: centos-bounces@centos.org
i had used all the resources as below and when i had all the untar in a directories and then ./configure
the
netcdf file so it fives x lib developer is missing and some x11
library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz
ad+lists@uni-x.orgwrote:
> Am 30.01.2014 16:03, schrieb Alexander Dalloz: >> Am 30.01.2014 15:45, schrieb dip patel: >>> i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee
and
> want >>> to install netcdf file and ncview but it gives some OS error > Sorry, I did sent my previous message too early. > > Your problem description lacks a lot of detail. > > Where do you take netcdf from? The EPEL repository provides it. If
you
> use that package and binaries fail, you should contact the EPEL
packager
> and provide a bug report. > > "some OS error" is very unspecific. > > Start by asking yourself: "What kind of information would I need if > someone else has this problem and searches for support?" Then
provide
> this information actively. > > Kind regards > > Alexander > > _______________________________________________ > CentOS mailing list > CentOS@centos.org > http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
Why do you don't use "yum search netcdf" btw "yum install netcdf" ?
Mit freundlichen Grüßen / Kind regards
Andreas Reschke _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
--
Thanks and Regards, Dip Patel +919925598555
--
Thanks and Regards, Dip Patel +919925598555 _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
On Thu, 2014-01-30 at 10:38 -0500, yoursurrogategod@gmail.com wrote:
Google is your friend (not that you really need in this instance).
Sent from my iPhone
Please stop posting rubbish.
What is the point in your single line comment followed by 124 lines of previous postings ?
CUT-out all unnecessary parts of previous postings.
Thank you.
From: dip patel dip.patel6555@gmail.com
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
On the CentOS website homepage there is a BIG and bright orange button that says "Get CentOS Linux Now". Maybe try to click on it...
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library is also missing etc so please help me...
If you miss dev libraries... install them. By example: yum install libX11-devel
If you need to find which package provides a given file: yum whatprovides *FILENAME
Also, if you want detailed answers, ask detailed questions.
JD
On Thu, Jan 30, 2014 at 9:32 AM, dip patel dip.patel6555@gmail.com wrote:
or i m also want to run cent os with my window 8 socan u please provide a direct download link for centos 6.5 or ftp link for download it?
I'm not sure what you mean by 'with window 8', but VMware player or Virtualbox will probably let you run another OS as a guest. To find downloads, just click the i386 or x86_64 links from: http://wiki.centos.org/Download You can use the dvd images for your choice of fairly complete system type installs, or take the minimal CD image for a quick install where you can add any of the other packages via 'yum install' or 'yum groupinstall'.
On Thu, Jan 30, 2014 at 9:30 AM, dip patel dip.patel6555@gmail.com wrote:
it can not b possible cause i m working in ISRO - PRL and it had a 348 node cluster and that all system is already running on Cent os so it is not possible to change whole system due to this single problem my head doesnt allow to me for this
OK, the _first_ thing you need to do is look at the EPEL (Extra Packages for Enterprise Linux) section of http://wiki.centos.org/AdditionalResources/Repositories. And understand that the rpm packages in that repository do not overwrite any base system packages (although they may conflict with other 3rd party packages). These packages are known to work on RHEL/CentOS - something you can't say for some random tarball you compile yourself.
After you install the epel-release package, you can use 'yum search packagename', 'yum info packagename', yum install packagename, etc., and subsequent 'yum update' runs will do the right things. Or if you want to do it the hard way you can download the individual rpm packages, install them in dependency order, and watch for updates yourself.
um, you could 'yum' your X11 binaries. make sure to also run your updates...
yum update very nice to do for your system.. after you take a 'snapshot' if a VM and it SHOULD BE by now...
.. um, also, you need to load development packages as it needs to 'make' and compile those packages unique to your system -- which is the purpose.
Also, er, it's all documented.
This is the only response I will write to this thread as very little reading was done indeed, I suspect...
Wizard of Hass!
On 1/30/2014 7:20 AM, dip patel wrote:
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library is also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
On Thu, Jan 30, 2014 at 8:38 PM, Alexander Dalloz ad+lists@uni-x.orgwrote:
Am 30.01.2014 16:03, schrieb Alexander Dalloz:
Am 30.01.2014 15:45, schrieb dip patel:
i m working in PHYSICAL RESEARCH LABORATORY as a engineer trainee and
want
to install netcdf file and ncview but it gives some OS error
Sorry, I did sent my previous message too early.
Your problem description lacks a lot of detail.
Where do you take netcdf from? The EPEL repository provides it. If you use that package and binaries fail, you should contact the EPEL packager and provide a bug report.
"some OS error" is very unspecific.
Start by asking yourself: "What kind of information would I need if someone else has this problem and searches for support?" Then provide this information actively.
Kind regards
Alexander
CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
dip patel wrote:
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library is also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
<snip> Oh. And where did you get the tarballs? Everyone, I think, has been assuming you did a yum install of the packages. Installing from a tarball can, sometimes, be... "interesting", because a) some of them are written and built on someone's system that is NOT standard, or, more frequently, built on some other distro, like current fedora, or worse, ubuntu, and so some libraries required are *MUCH newer than are standard on an enterprise o/s, which doesn't put newer ones in until they're no longer half-baked. <g>
Is there something that the versions from the tarballs provide that the ones from the standard repos (base, epel, rpmfusion) don't provide?
mark
On Fri, Jan 31, 2014 at 6:00 AM, m.roth@5-cent.us wrote:
dip patel wrote:
i had used all the resources as below and when i had all the untar in a directories and then ./configure the netcdf file so it fives x lib developer is missing and some x11 library
is
also missing etc so please help me...
netcdf-4.3.1.tar.gz
hdf5-1.9.148.tar.gz
ncview-2.1.2.tar.gz
<snip> Oh. And where did you get the tarballs? Everyone, I think, has been assuming you did a yum install of the packages. Installing from a tarball can, sometimes, be... "interesting", because a) some of them are written and built on someone's system that is NOT standard, or, more frequently, built on some other distro, like current fedora, or worse, ubuntu, and so some libraries required are *MUCH newer than are standard on an enterprise o/s, which doesn't put newer ones in until they're no longer half-baked. <g>
Is there something that the versions from the tarballs provide that the ones from the standard repos (base, epel, rpmfusion) don't provide?
From what he said he is not allowed to update the system by his 'head'
(presumably he means his boss). I wonder why? That's presumably why he is trying to install from the tarballs. In later posts he has changed tack and started talking about installing CentOS, presumably on his own machine (which makes sense). Les directed him to vmware or virtualbox. Sounds like a beginner and there might be a language barrier. We've all been there at one time!
Cheers,
Cliff
On Thu, 30 Jan 2014, Bob Marcan wrote:
Please post sssd.conf.
OK, here it is. Note that we're using service discovery to locate the DC's, which avoids having to hard-code the DC host names. This particular sssd.conf was from a machine called nebula, and europa.icse.cornell.edu is the domain (and realm) name.
[sssd] config_file_version = 2 reconnection_retries = 3 sbus_timeout = 30 services = nss, pam domains = LOCAL, EUROPA
[nss] filter_groups = root filter_users = root reconnection_retries = 3
[pam] reconnection_retries = 3 pam_pwd_expiration_warning = 7
[domain/LOCAL] description = Local Users domain id_provider = local enumerate = false min_id = 400 max_id = 499
[domain/EUROPA] description = EUROPA Environment id_provider = ldap auth_provider = krb5 chpass_provider = krb5 enumerate = false min_id = 1000 max_id = 59999 dns_discovery_domain = europa.icse.cornell.edu
ldap_sasl_mech = GSSAPI ldap_sasl_authid = HOST/nebula.icse.cornell.edu@EUROPA.ICSE.CORNELL.EDU
ldap_search_base = DC=europa,DC=icse,DC=cornell,DC=edu ldap_id_use_start_tls = false ldap_tls_reqcert = never ldap_tls_cacertdir = /etc/openldap/cacerts ldap_schema = rfc2307bis ldap_referrals = false ldap_force_upper_case_realm = true ldap_access_order = expire ldap_account_expire_policy = ad ldap_sasl_canonicalize = false
ldap_user_search_base = CN=users,DC=europa,DC=icse,DC=cornell,DC=edu ldap_user_object_class = person ldap_user_name = sAMAccountName ldap_user_fullname = displayName ldap_user_gecos = displayName ldap_user_uid_number = uidNumber ldap_user_gid_number = gidNumber ldap_user_home_directory = unixHomeDirectory ldap_user_shell = loginShell ldap_user_principal = userPrincipalName ldap_user_modify_timestamp = whenChanged
ldap_group_search_base = CN=users,DC=europa,DC=icse,DC=cornell,DC=edu ldap_group_object_class = group ldap_group_name = sAMAccountName ldap_group_gid_number = gidNumber ldap_group_modify_timestamp = whenChanged ldap_group_nesting_level = 2
krb5_server = europa.icse.cornell.edu krb5_kpasswd = europa.icse.cornell.edu krb5_realm = EUROPA.ICSE.CORNELL.EDU krb5_ccachedir = /tmp krb5_ccname_template = FILE:%d/krb5cc_%U_XXXXXX krb5_auth_timeout = 15
-Steve
I love .conf files.. can you include Shockwave with it, there are some that may not understand it...
j/h
On 1/30/2014 6:13 AM, Steve Thompson wrote:
On Tue, 28 Jan 2014, James B. Byrne wrote:
Does anyone here use a Samba4 setup for single sign-on for MS_Win workstations and CentOS-6 boxes? Does anyone here use it for imap and/or smtp authentication?
Yes to all of these, using sssd on CentOS, for about 18 months now. It works very well. We have two DC's on CentOS, no Windows DC's. No winbind. I can post the sssd.conf if anyone is interested.
Steve _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos
-
Alexander Dalloz -
Always Learning -
Andreas Reschke -
Bob Marcan -
Cliff Pratt -
dip patel -
James A. Peltier -
James B. Byrne -
Jeffrey Hass -
John Doe -
Les Mikesell -
m.roth＠5-cent.us -
Sorin Srbu -
Steve Thompson -
yoursurrogategod＠gmail.com