Modify the boot lable as below.

Sudo vim /etc/inittab

Id:5:initdefault: Id:3:initdefault:

You have to chage the setup 5 > 3

Good luck!!

-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Peidong Chen Sent: Thursday, March 19, 2015 12:09 PM To: CentOS mailing list Subject: Re: [CentOS] How to boot CentOS 7 in Text mode in default?

I have done what you said and I restarted centos7. It still goes into graph mode automatically. So what is the step I can do to go into text mode automatically?

2015-03-19 12:03 GMT-07:00 Digimer lists@alteeve.ca:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Try:

plymouth-set-default-theme --list

You should see 'text' and 'details'. You probably want details, so try:

plymouth-set-default-theme details -R

This will take a little while to run, so be patient.

digimer

On 19/03/15 02:58 PM, Peidong Chen wrote:

...

How to boot CentOS 7 in Text mode in default? I install CentOS 7 using vmware, and do not want to use graph mode.

Thanks, Peidong _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

---

Digimer Papers and Projects: https://alteeve.ca/w/ What if the cure for cancer is trapped in the mind of a person without access to education? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1

iQIcBAEBAgAGBQJVCx2PAAoJECChztQA3mh0NbUP/0Jh6bS0hQA7lrXY2Uii1dks OTlP6Kx1ENfKEjRHMaZli4Eb1wV344+eoB4YRnI437OOrfXi2/uTSnLb8A8AIeaR 0I+V56+rLZ+VLBvi9502TnG5iVV+M+CjQdwIURRl2T4xKqwyhh3K/kXGoSq4jWa1 3+/dMmbPeo9pWQAw/DPJKXc9ILIDuSPTCQUZrTPQooWxbksYwY2600kpR5XU9yL1 h0ELJUmDiMpNIxvbVYEGYiA5ALvYzorrprc2xDYustLPUmGHTfaGxf1Cu69Ox52V SiWYZng97zErr8wYnnYEzfEiB9qKJ+ZJXkzs6i0gd29qS3l+4SlRFGpFNDrj26ss 8oytjT0iNaNaeYYaz8UZFpL7HAoC2YzTKOIX8G0aganrGhitTTZFYwp8Rpvi9T9i DUAqllDSQ57ed6cUrT9XY6nccMclrm53fPpy3F2EwyL6EbUCUItuCXibe+Cyjco7 eiw47FL6Gz4QOacE+7me2YmUVKG/8xqF8x+mR9uPN9IFruhgiEuYdfFITiElATRw /1N8zlJanIVKfSDj6wCSWyDmtXwS8AEKdNrVcKjlwySExbC5xbzv+sklxQPDM4J+ q9+4ctMJ47M4ceBfMNe3Q/TA+kStnCZ4yRAIMr5sbKPX3ctxGZngmX4bbuvdHLSU So2h2oYKxNTkelK61KbI =RPOy -----END PGP SIGNATURE----- _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

In case of C7

$ Sudo systemctl disable gdm.service

then reboot your server.

Sean

-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of Peidong Chen Sent: Thursday, March 19, 2015 12:09 PM To: CentOS mailing list Subject: Re: [CentOS] How to boot CentOS 7 in Text mode in default?

I have done what you said and I restarted centos7. It still goes into graph mode automatically. So what is the step I can do to go into text mode automatically?

2015-03-19 12:03 GMT-07:00 Digimer lists@alteeve.ca:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

Try:

plymouth-set-default-theme --list

You should see 'text' and 'details'. You probably want details, so try:

plymouth-set-default-theme details -R

This will take a little while to run, so be patient.

digimer

On 19/03/15 02:58 PM, Peidong Chen wrote:

...

How to boot CentOS 7 in Text mode in default? I install CentOS 7 using vmware, and do not want to use graph mode.

Thanks, Peidong _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

---

Digimer Papers and Projects: https://alteeve.ca/w/ What if the cure for cancer is trapped in the mind of a person without access to education? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1

iQIcBAEBAgAGBQJVCx2PAAoJECChztQA3mh0NbUP/0Jh6bS0hQA7lrXY2Uii1dks OTlP6Kx1ENfKEjRHMaZli4Eb1wV344+eoB4YRnI437OOrfXi2/uTSnLb8A8AIeaR 0I+V56+rLZ+VLBvi9502TnG5iVV+M+CjQdwIURRl2T4xKqwyhh3K/kXGoSq4jWa1 3+/dMmbPeo9pWQAw/DPJKXc9ILIDuSPTCQUZrTPQooWxbksYwY2600kpR5XU9yL1 h0ELJUmDiMpNIxvbVYEGYiA5ALvYzorrprc2xDYustLPUmGHTfaGxf1Cu69Ox52V SiWYZng97zErr8wYnnYEzfEiB9qKJ+ZJXkzs6i0gd29qS3l+4SlRFGpFNDrj26ss 8oytjT0iNaNaeYYaz8UZFpL7HAoC2YzTKOIX8G0aganrGhitTTZFYwp8Rpvi9T9i DUAqllDSQ57ed6cUrT9XY6nccMclrm53fPpy3F2EwyL6EbUCUItuCXibe+Cyjco7 eiw47FL6Gz4QOacE+7me2YmUVKG/8xqF8x+mR9uPN9IFruhgiEuYdfFITiElATRw /1N8zlJanIVKfSDj6wCSWyDmtXwS8AEKdNrVcKjlwySExbC5xbzv+sklxQPDM4J+ q9+4ctMJ47M4ceBfMNe3Q/TA+kStnCZ4yRAIMr5sbKPX3ctxGZngmX4bbuvdHLSU So2h2oYKxNTkelK61KbI =RPOy -----END PGP SIGNATURE----- _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

_______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

What is your ideas? Let me know your opinion before saying no...

-----Original Message----- From: centos-bounces@centos.org [mailto:centos-bounces@centos.org] On Behalf Of James Hogarth Sent: Thursday, March 19, 2015 1:25 PM To: CentOS mailing list Subject: Re: [CentOS] How to boot CentOS 7 in Text mode in default?

On 19 March 2015 at 19:18, Sean.lim lim@u-can.us.com wrote:

In case of C7

$ Sudo systemctl disable gdm.service

then reboot your server.

Sean

Um no?

systemctl set-default multi-user.target

All you have to do is set the target to reach... what the above command does is symlink default.target to the chosen target. _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

On 20.03.2015 02:14, muiz wrote:

Dear all,

I have a Centos 6 (64bit) server used for samba and ACL control. There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem?

use xargs like in:

|find . -name "*.pdf" -print0 | xargs -0 RUNACOMMAND robert |

[root@s1 abc]# getfacl /abc # file: abc # owner: root # group: root user::rwx user:user01:--- user:user02:--- user:user03:--- ... user:user25:--- group::r-x mask::r-x other::r-x [root@s1 abc]# setfacl -m u:user30:rwx /abc setfacl: .: Argument list too long [root@s1 abc]#

Thanks and best regards, muiz _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

muiz wrote:

Dear all,

I have a Centos 6 (64bit) server used for samba and ACL control. There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem?

[root@s1 abc]# getfacl /abc # file: abc # owner: root # group: root user::rwx user:user01:--- user:user02:--- user:user03:--- ... user:user25:--- group::r-x mask::r-x other::r-x [root@s1 abc]# setfacl -m u:user30:rwx /abc setfacl: .: Argument list too long [root@s1 abc]#

What file system are you using?

James Pearson

Hi,

How many user's you have assigned on that directory?

--Regards Ashishkumar S. Yadav

On Tue, Mar 24, 2015 at 5:30 AM, muiz muiz@163.com wrote:

Hi, James, The file system is xfs (/dev/mapper/centos-home xfs 1891292900 1556745108 334547792 83% /home)

Thanks and best regards, Muiz

At 2015-03-23 19:36:02, "James Pearson" james-p@moving-picture.com wrote:

...

muiz wrote:

...

Dear all,

I have a Centos 6 (64bit) server used for samba and ACL control. There has a folder which a lot of user can access, when I add a new

user's ACL, but failed, do you know how to resolve this problem?

...

...

[root@s1 abc]# getfacl /abc # file: abc # owner: root # group: root user::rwx user:user01:--- user:user02:--- user:user03:--- ... user:user25:--- group::r-x mask::r-x other::r-x [root@s1 abc]# setfacl -m u:user30:rwx /abc setfacl: .: Argument list too long [root@s1 abc]#

What file system are you using?

James Pearson _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

---

CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

muiz wrote:

Hi, James, The file system is xfs (/dev/mapper/centos-home xfs 1891292900 1556745108 334547792 83% /home)

XFS has a low limit on the number of entries in an ACL (about 20)

However, I don't know why you are getting the error 'Argument list too long' - I get 'Operation not permitted' when I try to and an entry that goes over the limit ...

I believe more recent versions of the XFS code support more ACL entries (may be more recent than that used by RHEL/CentOS 7 ?)

James Pearson

On 3/19/2015 6:14 PM, muiz wrote:

I have a Centos 6 (64bit) server used for samba and ACL control. There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem?

put all those users in a group, and delete all the user ACLs on that directory, just add the single group ACL

Thanks john and Ashishkumar S. Yadav.

Now I use move some users to the specified groups to resolve this problem, but I don't want to create too many groups.

Thanks and regards, Muiz

At 2015-03-24 13:59:44, "Ashish Yadav" gwalashish@gmail.com wrote:

Hi,

On Tue, Mar 24, 2015 at 11:22 AM, John R Pierce pierce@hogranch.com wrote:

...

On 3/19/2015 6:14 PM, muiz wrote:

...

I have a Centos 6 (64bit) server used for samba and ACL control. There has a folder which a lot of user can access, when I add a new user's ACL, but failed, do you know how to resolve this problem?

put all those users in a group, and delete all the user ACLs on that directory, just add the single group ACL

This is a nice way to do. Totally agreed.

--Regards Ashishkumar S. Yadav _______________________________________________ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos