[Arm-dev] armv7hl - centos 7.1 rebuild status

[cc35359 at gmail.com]

Did something go wrong in the image build that it didn't dump it in /usr for some reason? I'm not sure why else that would happen, something when it installed the dbus rpm

On June 17, 2015 3:47:21 PM CDT, Mandar Joshi <emailmandar at gmail.com> wrote:
>> OK, I have a pi2 image built from RBF:
>>
>> https://github.com/mndar/rbf
>>
>> However, the dbus service is not working.
>>
>> The way RBF is currently set up, it uses the raspi2 3.18.14-v7+
>kernel
>> on a vfat filesystem.
>>
>> Are you using the raspi2 kernel and does your dbus service work?
>>
>
>I found a solution. Had to copy dbus.service and dbus.socket from
>/lib/systemd/system/ to /usr/lib/systemd/system and create a symlink
>for dbus.socket in dbus.target.wants
>
>The commands I executed were
>
>cd /usr/lib/systemd/system
>cp /lib/systemd/system/dbus.s* .
>cd dbus.target.wants/
>ln -s ../dbus.socket .
>reboot
>
>I tested this fix on Rpi2 and Odroid C1
>Can you check if this works for you?
>Not sure why this problem should have occurred in the first place. But
>the above steps do fix the problem for me.
>_______________________________________________
>Arm-dev mailing list
>Arm-dev at centos.org
>http://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20150617/686d161d/attachment.html>