Got my Nano Lite running Fedora23 which is the first step before testing with Centos7. On caveat, see below: On 12/25/2015 01:58 PM, Troy Dawson wrote: > > > On Fri, Dec 25, 2015 at 11:31 AM, Robert Moskowitz > <rgm at htt-consult.com <mailto:rgm at htt-consult.com>> wrote: > > > > On 12/25/2015 11:18 AM, Troy Dawson wrote: >> Hi, >> Have you looked at the pcduino3 nano lite. >> $15 and it looks like it meets all your specs. >> >> http://www.amazon.com/pcDuino-pcDuino3-Nano-Lite/dp/B00ZEPZGQO/ref=sr_1_1?ie=UTF8&qid=1451059734&sr=8-1&keywords=pcduino3+nano+lite >> >> It has everything in the kernel and uboot and works with Fedora >> 23 with no modifications. >> I've got Yor Linux armv7 build working on it, so I'm quite >> certain it will work with CentOS arm build, but I have not tested it. >> >> There are two downsides to this board. >> 1 - the sata (and power cable) are sold separately > > Ah, I see it does have a sata port. I missed that the first time. > > And it looks like it has the 5V power out that will hopefully > power any HD up to 1A. > > If it uses the same uboot as the pcduino 3 nano, then I can take > the Cubietruck image and dd the appropriate uboot and boot. > > Have you tested it? The big test is to only have uboot on a 4Gb > mSD and the whole image on the Sata HD and see if it switches over > like the Cubieboard does. Otherwise there is a lot of > customization needed. > > > Yes, I've tested it. It used the same uboot and kernel dtd as the > pcduino 3 nano. > I have a couple of the pcduino 3 nano machines and ordered a couple of > the lite's, so I've used both. I used the nano uboot on the lite and > it worked with no modifications. I also did nothing with the kernel > and it worked great. > > > I am assuming those 3 posts off to the side are for the serial > console. Nice that they put it off to the side. But that would > mess up a case somewhat. > I cannot get the serial console working. I have follow the schematic at: http://learn.linksprite.com/pcduino/quick-start/pcduino8/explanation-of-headers-of-pcduino3-nano/ To connect a USB/TTL adapter and run (as I do for my Cubieboards) screen /dev/ttyUSB0 115200 And nothing. So I really want to have this working to bring up C7 on it for testing. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20160104/b64aaa67/attachment-0005.html>