On 05/03/2016 03:26, Phong Vo wrote:
> There should be no issue of replacing U-boot in SPI nor with the mp30ar0
> Tianocore version.
> But you need to use the mp30ar0_tianocore_media.img I provide, not the one
> supplied
> with the Mustang board. It was likely the person burn the wrong BIOS on
> the board!
>
> You can burn the Tianocore image from U-boot using TFTP. Please check and
> setup your U-boot
> variables:
>
> media_addr_r=0x4001000000
> media_img=mp30ar0_tianocore_media.img
> spi_load=tftp ${media_addr_r} ${user_dir}/${media_img}
> spi_update=sf probe 0; sf erase 0x0 ${filesize}; sf write ${media_addr_r}
> 0x0 ${filesize}
>
> # run spi_load <== Make sure it is successful
> # run spi_update
> # reset
>
> If there is any issue, it's still recoverable using SD card.
>
> -Phong
>
>
Ok, thanks, I'll give it a go, just for the halibut!.
Cheers,
Mike.
--
Mike Howard