[Arm-dev] Gigabyte MP30-AR0

Sat Mar 5 11:06:35 UTC 2016
Richard W.M. Jones <rjones at redhat.com>

On Sat, Mar 05, 2016 at 10:26:25AM +0700, Phong Vo wrote:
> There should be no issue of replacing U-boot in SPI nor with the mp30ar0
> Tianocore version.
> But you need to use the mp30ar0_tianocore_media.img I provide, not the one
> supplied
> with the Mustang board. It was likely the person burn the wrong BIOS on
> the board!
> 
> You can burn the Tianocore image from U-boot using TFTP. Please check and
> setup your U-boot
> variables:
> 
> media_addr_r=0x4001000000
> media_img=mp30ar0_tianocore_media.img
> spi_load=tftp ${media_addr_r} ${user_dir}/${media_img}
> spi_update=sf probe 0; sf erase 0x0 ${filesize}; sf write ${media_addr_r}
> 0x0 ${filesize}
> 
> # run spi_load   <== Make sure it is successful
> # run spi_update
> # reset
> 
> If there is any issue, it's still recoverable using SD card.

As a warning to anyone else, that bricked mine.

Rich.

-- 
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-top is 'top' for virtual machines.  Tiny program with many
powerful monitoring features, net stats, disk stats, logging, etc.
http://people.redhat.com/~rjones/virt-top