El 9/8/18 a las 12:31, Robert Moskowitz escribió: > > > On 08/09/2018 11:21 AM, arm_ml at rirasoft.de wrote: >> Am 2018-08-09 16:57, schrieb Robert Moskowitz: >>> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote: >>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz: >>>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote: >>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco: >>>>>>> <snip> >> snip >>>> >>>> >>>> Okay, I give CentOs on this device a try. What have I done: >>>> 1. write Fedora-Minimal-armhfp-Rawhide-20180802.n.0-sda.raw.xz on >>>> the SD-card >>>> 2. delete all 4 partions >>>> 3. mount CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img as >>>> loop device >>>> 4. create 3 new partions on SD-Card (same size as CentOS-Image) >>>> 5. copy 1. and 3. partion from CentOS to SD-Card >>>> 6. copy sun8i-a83t-cubietruck-plus.dtb From Fedora to >>>> /mnt/SDCard/1/dtb-4.4.34-201.el7.armv7hl/ >>>> 7. boot from SD-Card >>>> >>>> boot log: >>>> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) >>>> DRAM: 2048 MiB >>>> Trying to boot from MMC1 >>>> >>>> >>>> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology >>> >>> OK. You are using the latest uboot. Centos build only has 2018.03 >>> >>> Another way is to copy the uboot from Fedora: >>> >>> /usr/share/uboot/Cubietruck_plus/ >>> >>> and dd that onto the Centos 1804 image (why are you using the old 1611 >>> image? There were problems with it an Cubietruck+ as I recall). >> >> I'm using CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img.xz >> because of the CubieTruck in the name. With the >> CentOS-Userland-7-armv7hl-generic-Minimal-1804-sda.raw.xz the boot >> process complains about missing vmlinuz-4.14.28-201.el7.centos.armv7hl > > Read the instructions on: > https://wiki.centos.org/SpecialInterestGroup/AltArch/armhfp for > installing Centos generic userland. > > But follow my recommendation to swipe the newer uboot from your > Fedora-rawhide image, rather than installing the uboot-images on your > system and only getting the 2018.03 version. > > It runs fine on my Cubieboard2 and Cubietruck. I do not have a plus. Cubietruck plus is SoC A83T, and it doesn't work with our 2018.03 uboot, but it does with 2018.05 > >>> >>> Boot this and see what it does. If it fails, then copy the dtb from >>> Fedora: >>> >>> /usr/lib/modules/4.18.0-0.rc8.git0.1.fc29.armv7hl/dtb/sun8i-a83t-cubietruck-plus.dtb >>> >>> >>>> >>>> CPU: Allwinner A83T (SUN8I 1673) >>>> Model: Cubietech Cubietruck Plus >>>> I2C: ready >>>> DRAM: 2 GiB >>>> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >>>> Loading Environment from FAT... *** Warning - bad CRC, using >>>> default environment >>>> >>>> Failed (-5) >>>> In: serial >>>> Out: serial >>>> Err: serial >>>> Net: No ethernet found. >>>> starting USB... >>>> USB0: failed to get usb PHY >>>> Port not available. >>>> USB1: failed to get usb at 01c1a000 usb PHY >>>> Port not available. >>>> USB2: failed to get usb at 01c1b000 usb PHY >>>> Port not available. >>>> Hit any key to stop autoboot: 0 >>>> switch to partitions #0, OK >>>> mmc0 is current device >>>> Scanning mmc 0:1... >>>> Found /extlinux/extlinux.conf >>>> Retrieving file: /extlinux/extlinux.conf >>>> 336 bytes read in 13 ms (24.4 KiB/s) >>>> Ignoring unknown command: ui >>>> Ignoring malformed menu command: autoboot >>>> Ignoring unknown command: totaltimeout >>>> centos Options >>>> 1: centos >>>> Enter choice: 1: centos >>>> Retrieving file: /initramfs-4.4.34-201.el7.armv7hl.img >>>> 35020663 bytes read in 22174 ms (1.5 MiB/s) >>>> Retrieving file: /vmlinuz-4.4.34-201.el7.armv7hl >>>> 6051744 bytes read in 620 ms (9.3 MiB/s) >>>> append: enforcing=0 root=UUID=ad25a528-baf4-469c-bd12-5276e8f5f9ae >>>> Retrieving file: >>>> /dtb-4.4.34-201.el7.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>>> 548864 bytes read in 260 ms (2 MiB/s) >>>> ERROR: Did not find a cmdline Flattened Device Tree >>>> Could not find a valid device tree >>>> SCRIPT FAILED: continuing... >>>> Found U-Boot script /boot.scr >>>> 2 bytes read in 12 ms (0 Bytes/s) >>>> ## Executing script at 43100000 >>>> Wrong image format for "source" command >>>> SCRIPT FAILED: continuing... >>>> switch to partitions #0, OK >>>> mmc1(part 0) is current device >>>> Scanning mmc 1:1... >>>> starting USB... >>>> USB0: failed to get usb PHY >>>> Port not available. >>>> USB1: failed to get usb at 01c1a000 usb PHY >>>> Port not available. >>>> USB2: failed to get usb at 01c1b000 usb PHY >>>> Port not available. >>>> USB is stopped. Please issue 'usb start' first. >>>> starting USB... >>>> USB0: failed to get usb PHY >>>> Port not available. >>>> USB1: failed to get usb at 01c1a000 usb PHY >>>> Port not available. >>>> USB2: failed to get usb at 01c1b000 usb PHY >>>> Port not available. >>>> No ethernet found. >>>> missing environment variable: pxeuuid >>>> Retrieving file: /extlinux/pxelinux.cfg/00000000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/0000000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/000000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/00000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/0000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/000 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/00 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/0 >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/default-arm-sunxi >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/default-arm >>>> No ethernet found. >>>> Retrieving file: /extlinux/pxelinux.cfg/default >>>> No ethernet found. >>>> Config file not found >>>> starting USB... >>>> USB0: failed to get usb PHY >>>> Port not available. >>>> USB1: failed to get usb at 01c1a000 usb PHY >>>> Port not available. >>>> USB2: failed to get usb at 01c1b000 usb PHY >>>> Port not available. >>>> No ethernet found. >>>> No ethernet found >>>> >>>> Greetings >>>> Andreas >>>> >> >> Andreas >> > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev