On 08/09/2018 12:30 PM, Pablo Sebastián Greco wrote: > > El 9/8/18 a las 12:31, Robert Moskowitz escribió: >> >> >> On 08/09/2018 11:21 AM, arm_ml at rirasoft.de wrote: >>> Am 2018-08-09 16:57, schrieb Robert Moskowitz: >>>> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote: >>>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz: >>>>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote: >>>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco: >>>>>>>> <snip> >>> snip >>>>> >>>>> >>>>> Okay, I give CentOs on this device a try. What have I done: >>>>> 1. write Fedora-Minimal-armhfp-Rawhide-20180802.n.0-sda.raw.xz on >>>>> the SD-card >>>>> 2. delete all 4 partions >>>>> 3. mount CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img as >>>>> loop device >>>>> 4. create 3 new partions on SD-Card (same size as CentOS-Image) >>>>> 5. copy 1. and 3. partion from CentOS to SD-Card >>>>> 6. copy sun8i-a83t-cubietruck-plus.dtb From Fedora to >>>>> /mnt/SDCard/1/dtb-4.4.34-201.el7.armv7hl/ >>>>> 7. boot from SD-Card >>>>> >>>>> boot log: >>>>> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) >>>>> DRAM: 2048 MiB >>>>> Trying to boot from MMC1 >>>>> >>>>> >>>>> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner >>>>> Technology >>>> >>>> OK. You are using the latest uboot. Centos build only has 2018.03 >>>> >>>> Another way is to copy the uboot from Fedora: >>>> >>>> /usr/share/uboot/Cubietruck_plus/ >>>> >>>> and dd that onto the Centos 1804 image (why are you using the old 1611 >>>> image? There were problems with it an Cubietruck+ as I recall). >>> >>> I'm using CentOS-Userland-7-armv7hl-Minimal-1611-CubieTruck.img.xz >>> because of the CubieTruck in the name. With the >>> CentOS-Userland-7-armv7hl-generic-Minimal-1804-sda.raw.xz the boot >>> process complains about missing vmlinuz-4.14.28-201.el7.centos.armv7hl >> >> Read the instructions on: >> https://wiki.centos.org/SpecialInterestGroup/AltArch/armhfp for >> installing Centos generic userland. >> >> But follow my recommendation to swipe the newer uboot from your >> Fedora-rawhide image, rather than installing the uboot-images on your >> system and only getting the 2018.03 version. >> >> It runs fine on my Cubieboard2 and Cubietruck. I do not have a plus. > Cubietruck plus is SoC A83T, and it doesn't work with our 2018.03 > uboot, but it does with 2018.05 OK. So after the dd of the generic image, dd the uboot from a Fedora image. Then boot up. >> >>>> >>>> Boot this and see what it does. If it fails, then copy the dtb >>>> from Fedora: >>>> >>>> /usr/lib/modules/4.18.0-0.rc8.git0.1.fc29.armv7hl/dtb/sun8i-a83t-cubietruck-plus.dtb >>>> >>>> >>>>> >>>>> CPU: Allwinner A83T (SUN8I 1673) >>>>> Model: Cubietech Cubietruck Plus >>>>> I2C: ready >>>>> DRAM: 2 GiB >>>>> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >>>>> Loading Environment from FAT... *** Warning - bad CRC, using >>>>> default environment >>>>> >>>>> Failed (-5) >>>>> In: serial >>>>> Out: serial >>>>> Err: serial >>>>> Net: No ethernet found. >>>>> starting USB... >>>>> USB0: failed to get usb PHY >>>>> Port not available. >>>>> USB1: failed to get usb at 01c1a000 usb PHY >>>>> Port not available. >>>>> USB2: failed to get usb at 01c1b000 usb PHY >>>>> Port not available. >>>>> Hit any key to stop autoboot: 0 >>>>> switch to partitions #0, OK >>>>> mmc0 is current device >>>>> Scanning mmc 0:1... >>>>> Found /extlinux/extlinux.conf >>>>> Retrieving file: /extlinux/extlinux.conf >>>>> 336 bytes read in 13 ms (24.4 KiB/s) >>>>> Ignoring unknown command: ui >>>>> Ignoring malformed menu command: autoboot >>>>> Ignoring unknown command: totaltimeout >>>>> centos Options >>>>> 1: centos >>>>> Enter choice: 1: centos >>>>> Retrieving file: /initramfs-4.4.34-201.el7.armv7hl.img >>>>> 35020663 bytes read in 22174 ms (1.5 MiB/s) >>>>> Retrieving file: /vmlinuz-4.4.34-201.el7.armv7hl >>>>> 6051744 bytes read in 620 ms (9.3 MiB/s) >>>>> append: enforcing=0 root=UUID=ad25a528-baf4-469c-bd12-5276e8f5f9ae >>>>> Retrieving file: >>>>> /dtb-4.4.34-201.el7.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>>>> 548864 bytes read in 260 ms (2 MiB/s) >>>>> ERROR: Did not find a cmdline Flattened Device Tree >>>>> Could not find a valid device tree >>>>> SCRIPT FAILED: continuing... >>>>> Found U-Boot script /boot.scr >>>>> 2 bytes read in 12 ms (0 Bytes/s) >>>>> ## Executing script at 43100000 >>>>> Wrong image format for "source" command >>>>> SCRIPT FAILED: continuing... >>>>> switch to partitions #0, OK >>>>> mmc1(part 0) is current device >>>>> Scanning mmc 1:1... >>>>> starting USB... >>>>> USB0: failed to get usb PHY >>>>> Port not available. >>>>> USB1: failed to get usb at 01c1a000 usb PHY >>>>> Port not available. >>>>> USB2: failed to get usb at 01c1b000 usb PHY >>>>> Port not available. >>>>> USB is stopped. Please issue 'usb start' first. >>>>> starting USB... >>>>> USB0: failed to get usb PHY >>>>> Port not available. >>>>> USB1: failed to get usb at 01c1a000 usb PHY >>>>> Port not available. >>>>> USB2: failed to get usb at 01c1b000 usb PHY >>>>> Port not available. >>>>> No ethernet found. >>>>> missing environment variable: pxeuuid >>>>> Retrieving file: /extlinux/pxelinux.cfg/00000000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/0000000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/000000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/00000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/0000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/000 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/00 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/0 >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/default-arm-sunxi >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/default-arm >>>>> No ethernet found. >>>>> Retrieving file: /extlinux/pxelinux.cfg/default >>>>> No ethernet found. >>>>> Config file not found >>>>> starting USB... >>>>> USB0: failed to get usb PHY >>>>> Port not available. >>>>> USB1: failed to get usb at 01c1a000 usb PHY >>>>> Port not available. >>>>> USB2: failed to get usb at 01c1b000 usb PHY >>>>> Port not available. >>>>> No ethernet found. >>>>> No ethernet found >>>>> >>>>> Greetings >>>>> Andreas >>>>> >>> >>> Andreas >>> >> >> _______________________________________________ >> Arm-dev mailing list >> Arm-dev at centos.org >> https://lists.centos.org/mailman/listinfo/arm-dev > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev