El 10/8/18 a las 10:18, Robert Moskowitz escribió: > > > On 08/10/2018 08:51 AM, Andreas Reschke wrote: >> >> Am 10.08.2018 um 14:36 schrieb Robert Moskowitz: >>> >>> On 08/10/2018 08:17 AM, arm_ml at rirasoft.de wrote: >>>> Am 2018-08-09 17:31, schrieb Robert Moskowitz: >>>>> On 08/09/2018 11:21 AM, arm_ml at rirasoft.de wrote: >>>>>> Am 2018-08-09 16:57, schrieb Robert Moskowitz: >>>>>>> On 08/09/2018 10:31 AM, arm_ml at rirasoft.de wrote: >>>>>>>> Am 2018-08-09 13:58, schrieb Robert Moskowitz: >>>>>>>>> On 08/09/2018 07:34 AM, arm_ml at rirasoft.de wrote: >>>>>>>>>> Am 2018-08-07 12:23, schrieb Pablo Sebastián Greco: >>>>>>>>>>> <snip> >>>>>> snip >>>> Wow, I can boot it, but I can't login and can't install the kernel >>>> from Pablo. Whats next? >>>> >>>> >>>> U-Boot SPL 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) >>> Good you got the current uboot. >>> >>>> DRAM: 2048 MiB >>>> Trying to boot from MMC1 >>>> >>>> >>>> U-Boot 2018.09-rc1 (Jul 31 2018 - 12:18:07 +0000) Allwinner Technology >>>> >>>> CPU: Allwinner A83T (SUN8I 1673) >>>> Model: Cubietech Cubietruck Plus >>> Do you have any other arm soc? If you put that cards uboot on, boot >>> up on that card, install the new kernel, then go back to the >>> Cubietruck+ uboot, that would work. >>> >>> Pablo may know of a simpler method, as I don't do kernel work. I did >>> work a lot with uboot a couple years ago. >> Sorry: this didn't work, because this Image didn't boot on my Cubietruck >> 3. Maybe Pablo has an Idea? > > Did you dd the Cubietruck uboot? I have booted on my C3. > > Though there may be a 1st boot problem here on things that are copied > during 1st boot based on what uboot is present. In that case, things > are really hard, and quite beyond my limited skills. > > >> >>> >>>> I2C: ready >>>> DRAM: 2 GiB >>>> MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 >>>> Loading Environment from FAT... *** Warning - bad CRC, using default >>>> environment >>>> >>>> Failed (-5) >>>> In: serial >>>> Out: serial >>>> Err: serial >>>> Net: No ethernet found. >>>> starting USB... >>>> USB0: failed to get usb PHY >>>> Port not available. >>>> USB1: failed to get usb at 01c1a000 usb PHY >>>> Port not available. >>>> USB2: failed to get usb at 01c1b000 usb PHY >>>> Port not available. >>>> Hit any key to stop autoboot: 0 >>>> switch to partitions #0, OK >>>> mmc0 is current device >>>> Scanning mmc 0:2... >>>> Found /extlinux/extlinux.conf >>>> Retrieving file: /extlinux/extlinux.conf >>>> 857 bytes read in 16 ms (51.8 KiB/s) >>>> Ignoring unknown command: ui >>>> Ignoring malformed menu command: autoboot >>>> Ignoring malformed menu command: hidden >>>> Ignoring unknown command: totaltimeout >>>> CentOS-Userland-7-armv7hl-generic-Minimal-1804 Boot Options. >>>> 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >>>> (4.14.28-201.el7.centos.armv7hl) >>>> 2: single >>>> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-1804 >>>> (4.14.28-201.el7.centos.armv7hl) >>>> Retrieving file: /initramfs-4.14.28-201.el7.centos.armv7hl.img >>>> 42665567 bytes read in 11495 ms (3.5 MiB/s) >>>> Retrieving file: /vmlinuz-4.14.28-201.el7.centos.armv7hl >>>> 6627840 bytes read in 682 ms (9.3 MiB/s) >>>> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >>>> Retrieving file: >>>> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>>> 6627840 bytes read in 682 ms (9.3 MiB/s) >>>> append: ro root=UUID=e4d55603-4823-4fb7-ab52-46f2e9fcaae1 selinux=off >>>> Retrieving file: >>>> /dtb-4.14.28-201.el7.centos.armv7hl/sun8i-a83t-cubietruck-plus.dtb >>>> 10902 bytes read in 586 ms (17.6 KiB/s) >>>> ## Flattened Device Tree blob at 43000000 >>>> Booting using the fdt blob at 0x43000000 >>>> Loading Ramdisk to 4774f000, end 49fff65f ... OK >>>> Loading Device Tree to 47749000, end 4774ea95 ... OK >>>> >>>> Starting kernel ... >>>> >>>> [ 0.000000] Booting Linux on physical CPU 0x0 >>>> [ 0.000000] Linux version 4.14.28-201.el7.centos.armv7hl >>>> (mockbuild at armhfp-02.bsys.centos.org) (gcc version 4.8.5 20150623 >>>> (Red Hat 4.8.5-16) (GCC)) #1 SMP Mon Mar 19 20:25:46 UTC 2018 >>>> [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), >>>> cr=10c5387d >>>> [ 0.000000] CPU: div instructions available: patching division code >>>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >>>> instruction cache >>>> [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Plus >>>> [ 0.000000] Memory policy: Data cache writealloc >>>> [ 0.000000] efi: Getting EFI parameters from FDT: >>>> [ 0.000000] efi: UEFI not found. >>>> snip >>>> Welcome to CentOS Linux 7 (Core) dracut-033-535.el7 (Initramfs)! >>>> >>>> [ 5.950324] systemd[1]: No hostname configured. >>>> [ 5.954983] systemd[1]: Set hostname to <localhost>. >>>> [ 5.960338] systemd[1]: Initializing machine ID from random >>>> generator. >>>> [ OK ] Reached target Swap. >>>> [ 6.310341] systemd[1]: Reached target Swap. >>>> [ 6.314834] systemd[1]: Starting Swap. >>>> [ OK ] Created slice Root Slice. >>>> [ 6.326288] systemd[1]: Created slice Root Slice. >>>> [ 6.331225] systemd[1]: Starting Root Slice. >>>> [ OK ] Listening on Journal Socket. >>>> [ OK ] Listening on udev Kernel Socket. >>>> [ OK ] Reached target Timers. >>>> [ OK ] Created slice System Slice. >>>> Starting Create list of required st... nodes for the current >>>> kernel... >>>> Starting Journal Service... >>>> Starting Apply Kernel Variables... >>>> [ OK ] Listening on udev Control Socket. >>>> [ OK ] Reached target Slices. >>>> [ OK ] Reached target Sockets. >>>> Starting Setup Virtual Console... >>>> [ OK ] Reached target Local File Systems. >>>> Starting dracut cmdline hook... >>>> [ OK ] Started Create list of required sta...ce nodes for the >>>> current kernel. >>>> [ OK ] Started Apply Kernel Variables. >>>> [ OK ] Started Setup Virtual Console. >>>> Starting Create Static Device Nodes in /dev... >>>> [ OK ] Started Journal Service. >>>> [ OK ] Started Create Static Device Nodes in /dev. >>>> [ OK ] Started dracut cmdline hook. >>>> Starting dracut pre-udev hook... >>>> [ OK ] Started dracut pre-udev hook. >>>> Starting udev Kernel Device Manager... >>>> [ OK ] Started udev Kernel Device Manager. >>>> Starting udev Coldplug all Devices... >>>> [ OK ] Started udev Coldplug all Devices. >>>> Starting Show Plymouth Boot Screen... >>>> [ OK ] Reached target System Initialization. >>>> Starting dracut initqueue hook... >>>> [ OK ] Started Show Plymouth Boot Screen. >>>> [ OK ] Reached target Paths. >>>> [ OK ] Reached target Basic System. >>>> Mounting Configuration File System... >>>> [ OK ] Mounted Configuration File System. >>>> [ 9.258492] ehci-platform: EHCI generic platform driver >>>> [ 9.310921] sunxi-mmc 1c0f000.mmc: Got CD GPIO >>>> [ 9.353339] sunxi-mmc 1c0f000.mmc: base:0xf0b41000 irq:24 >>>> [ 9.401563] mmc0: host does not support reading read-only switch, >>>> assuming write-enable >>>> [ 9.409746] sunxi-mmc 1c11000.mmc: base:0xf0b45000 irq:25 >>>> [ 9.418906] mmc0: new high speed SDHC card at address 0007 >>>> [ 9.488974] mmc1: new DDR MMC card at address 0001 >>>> [ 9.710645] mmcblk0: mmc0:0007 SD32G 29.0 GiB >>>> [ 9.720620] mmcblk0: p1 p2 p3 p4 >>>> [ 9.731581] mmcblk1: mmc1:0001 NCard 7.30 GiB >>>> [ 9.736734] mmcblk1boot0: mmc1:0001 NCard partition 1 4.00 MiB >>>> [ 9.744053] mmcblk1boot1: mmc1:0001 NCard partition 2 4.00 MiB >>>> [ 9.754396] mmcblk1: p1 p2 >>>> [ OK ] Found device >>>> /dev/disk/by-uuid/e4d55603-4823-4fb7-ab52-46f2e9fcaae1. >>>> [ OK ] Started dracut initqueue hook. >>>> [ OK ] Reached target Remote File Systems (Pre). >>>> [ OK ] Reached target Remote File Systems. >>>> Starting File System Check on >>>> /dev/...3-4823-4fb7-ab52-46f2e9fcaae1... >>>> [ OK ] Started File System Check on >>>> /dev/d...603-4823-4fb7-ab52-46f2e9fcaae1. >>>> Mounting /sysroot... >>>> [ 10.483219] EXT4-fs (mmcblk0p4): mounted filesystem with ordered >>>> data mode. Opts: (null) >>>> [ OK ] Mounted /sysroot. >>>> [ OK ] Reached target Initrd Root File System. >>>> Starting Reload Configuration from the Real Root... >>>> [ OK ] Started Reload Configuration from the Real Root. >>>> [ OK ] Reached target Initrd File Systems. >>>> [ OK ] Reached target Initrd Default Target. >>>> Starting dracut pre-pivot and cleanup hook... >>>> [ OK ] Started dracut pre-pivot and cleanup hook. >>>> Starting Cleaning Up and Shutting Down Daemons... >>>> [ OK ] Stopped Cleaning Up and Shutting Down Daemons. >>>> [ OK ] Stopped dracut pre-pivot and cleanup hook. >>>> Stopping dracut pre-pivot and cleanup hook... >>>> [ OK ] Stopped target Initrd Default Target. >>>> [ OK ] Stopped target Basic System. >>>> [ OK ] Stopped target Paths. >>>> [ OK ] Stopped target System Initialization. >>>> Stopping udev Kernel Device Manager... >>>> [ OK ] Stopped target Swap. >>>> [ OK ] Stopped target Slices. >>>> [ OK ] Stopped target Sockets. >>>> [ OK ] Stopped Apply Kernel Variables. >>>> Stopping Apply Kernel Variables... >>>> [ OK ] Stopped target Timers. >>>> [ OK ] Stopped target Local File Systems. >>>> Starting Plymouth switch root service... >>>> [ OK ] Stopped target Remote File Systems. >>>> [ OK ] Stopped target Remote File Systems (Pre). >>>> [ OK ] Stopped dracut initqueue hook. >>>> Stopping dracut initqueue hook... >>>> [ OK ] Stopped udev Coldplug all Devices. >>>> Stopping udev Coldplug all Devices... >>>> [ OK ] Stopped udev Kernel Device Manager. >>>> snip >>>> Welcome to CentOS Linux 7 (Core)! >>>> >>>> [ OK ] Stopped Switch Root. >>>> [ OK ] Stopped Journal Service. >>>> Starting Journal Service... >>>> [ OK ] Reached target Local Encrypted Volumes. >>>> [ OK ] Created slice >>>> system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice. >>>> [ OK ] Set up automount Arbitrary Executab...ats File System >>>> Automount Point. >>>> Mounting Debug File System... >>>> [ OK ] Listening on /dev/initctl Compatibility Named Pipe. >>>> [ OK ] Stopped target Switch Root. >>>> [ OK ] Stopped target Initrd File Systems. >>>> [ OK ] Stopped target Initrd Root File System. >>>> [ OK ] Stopped File System Check on Root Device. >>>> Stopping File System Check on Root Device... >>>> [ OK ] Listening on udev Kernel Socket. >>>> [ OK ] Created slice system-getty.slice. >>>> Starting Read and set NIS domainname from >>>> /etc/sysconfig/network... >>>> Starting Collect Read-Ahead Data... >>>> [ OK ] Listening on Delayed Shutdown Socket. >>>> Mounting POSIX Message Queue File System... >>>> [ OK ] Created slice User and Session Slice. >>>> [ OK ] Reached target Slices. >>>> [ OK ] Reached target Remote File Systems. >>>> [ OK ] Created slice system-serial\x2dgetty.slice. >>>> [ OK ] Listening on udev Control Socket. >>>> Starting Create list of required st... nodes for the current >>>> kernel... >>>> [ OK ] Reached target Paths. >>>> Starting Replay Read-Ahead Data... >>>> [ OK ] Mounted POSIX Message Queue File System. >>>> [ OK ] Mounted Debug File System. >>>> [ OK ] Started Journal Service. >>>> [ OK ] Started Collect Read-Ahead Data. >>>> [ OK ] Started Replay Read-Ahead Data. >>>> [ OK ] Started Read and set NIS domainname from >>>> /etc/sysconfig/network. >>>> [ OK ] Started Create list of required sta...ce nodes for the >>>> current kernel. >>>> Starting Remount Root and Kernel File Systems... >>>> Starting Create Static Device Nodes in /dev... >>>> Starting Apply Kernel Variables... >>>> [ 17.296550] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null) >>>> [ OK ] Started Apply Kernel Variables. >>>> [ OK ] Started Remount Root and Kernel File Systems. >>>> Starting udev Coldplug all Devices... >>>> Starting Load/Save Random Seed... >>>> Starting Configure read-only root support... >>>> Starting Flush Journal to Persistent Storage... >>>> [ OK ] Started Create Static Device Nodes in /dev. >>>> [ OK ] Started Load/Save Random Seed. >>>> [ 17.818547] systemd-journald[427]: Received request to flush >>>> runtime journal from PID 1 >>>> [ OK ] Reached target Local File Systems (Pre). >>>> Starting udev Kernel Device Manager... >>>> [ OK ] Started Flush Journal to Persistent Storage. >>>> [ OK ] Started Configure read-only root support. >>>> [ OK ] Started udev Kernel Device Manager. >>>> [ OK ] Started udev Coldplug all Devices. >>>> [ 19.146181] cpu cpu0: failed to get clock: -2 >>>> [ 19.218261] cpufreq-dt: probe of cpufreq-dt failed with error -2 >>>> [ 19.708227] ehci-platform 1c1a000.usb: EHCI Host Controller >>>> [ 19.721852] ehci-platform 1c1a000.usb: new USB bus registered, >>>> assigned bus number 1 >>>> [ 19.740546] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000 >>>> [ 19.762241] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 >>>> [ 19.775259] usb usb1: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 19.782236] usb usb1: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 19.789508] usb usb1: Product: EHCI Host Controller >>>> [ 19.794416] usb usb1: Manufacturer: Linux >>>> 4.14.28-201.el7.centos.armv7hl ehci_hcd >>>> [ 19.801926] usb usb1: SerialNumber: 1c1a000.usb >>>> [ 19.844670] hub 1-0:1.0: USB hub found >>>> [ 19.854212] hub 1-0:1.0: 1 port detected >>>> [ 19.868545] ehci-platform 1c1b000.usb: EHCI Host Controller >>>> [ 19.882930] ehci-platform 1c1b000.usb: new USB bus registered, >>>> assigned bus number 2 >>>> [ 19.901798] ehci-platform 1c1b000.usb: irq 27, io mem 0x01c1b000 >>>> [ 19.923267] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 >>>> [ 19.936351] usb usb2: New USB device found, idVendor=1d6b, >>>> idProduct=0002 >>>> [ 19.943225] usb usb2: New USB device strings: Mfr=3, Product=2, >>>> SerialNumber=1 >>>> [ 19.950493] usb usb2: Product: EHCI Host Controller >>>> [ 19.955399] usb usb2: Manufacturer: Linux >>>> 4.14.28-201.el7.centos.armv7hl ehci_hcd >>>> [ 19.962907] usb usb2: SerialNumber: 1c1b000.usb >>>> [ 20.008450] hub 2-0:1.0: USB hub found >>>> [ 20.019233] hub 2-0:1.0: 1 port detected >>>> [ OK ] Found device /dev/ttyS0. >>>> [ 20.253371] usb 1-1: new high-speed USB device number 2 using >>>> ehci-platform >>>> [ 20.304553] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled >>>> (timeout=16 sec, nowayout=0) >>>> [ 20.350267] usb 2-1: new high-speed USB device number 2 using >>>> ehci-platform >>>> [ 20.397887] usb 1-1: New USB device found, idVendor=05e3, >>>> idProduct=0718 >>>> [ 20.404808] usb 1-1: New USB device strings: Mfr=0, Product=1, >>>> SerialNumber=2 >>>> [ 20.412007] usb 1-1: Product: USB Storage >>>> [ 20.416058] usb 1-1: SerialNumber: 000000000033 >>>> [ 20.440034] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz >>>> [ 20.492897] usb 2-1: New USB device found, idVendor=0424, >>>> idProduct=3503 >>>> [ 20.499823] usb 2-1: New USB device strings: Mfr=0, Product=0, >>>> SerialNumber=0 >>>> [ 20.523676] hub 2-1:1.0: USB hub found >>>> [ 20.535200] hub 2-1:1.0: 2 ports detected >>>> [ 20.626373] usb3503 usb-hub: Ports disabled with no control >>>> interface >>>> [ OK ] Found device /dev/disk/by-uuid/2CA3-F2A2. >>>> [ 20.760223] usb3503 usb-hub: switched to HUB mode >>>> [ 20.765030] usb3503 usb-hub: usb3503_probe: probed in hub mode >>>> [ OK ] Found device >>>> /dev/disk/by-uuid/13ad9f52-e2ca-4fd1-83d6-7b0af86a85df. >>>> Mounting /boot... >>>> [ 20.966073] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >>>> feature incompatibilities >>>> [FAILED] Failed to mount /boot. >>>> See 'systemctl status boot.mount' for details. >>>> [DEPEND] Dependency failed for Local File Systems. >>>> [DEPEND] Dependency failed for Relabel all filesystems, if necessary. >>>> [DEPEND] Dependency failed for Migrate local... structure to the new >>>> structure. >>>> [DEPEND] Dependency failed for /boot/fw. >>>> [ OK ] Reached target Timers. >>>> [ OK ] Reached target Network (Pre). >>>> [ OK ] Reached target Network. >>>> [ OK ] Reached target Network is Online. >>>> [ OK ] Reached target Login Prompts. >>>> Starting Crash recovery kernel arming... >>>> [ OK ] Reached target Sockets. >>>> Starting Import network configuration from initramfs... >>>> Starting Tell Plymouth To Write Out Runtime Data... >>>> [ OK ] Started Tell Plymouth To Write Out Runtime Data. >>>> [ OK ] Found device >>>> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >>>> Activating swap >>>> /dev/disk/by-uuid/1...1-f4bd-4db2-86d8-a802ceb87618... >>>> [ 21.646852] Adding 249852k swap on /dev/mmcblk0p3. Priority:-2 >>>> extents:1 across:249852k SSFS >>>> [ OK ] Activated swap >>>> /dev/disk/by-uuid/13b9fbb1-f4bd-4db2-86d8-a802ceb87618. >>>> [ OK ] Reached target Swap. >>>> [FAILED] Failed to start Crash recovery kernel arming. >>>> See 'systemctl status kdump.service' for details. >>>> [ OK ] Started Import network configuration from initramfs. >>>> [ OK ] Started Emergency Shell. >>>> Starting Emergency Shell... >>>> [ OK ] Reached target Emergency Mode. >>>> Starting Create Volatile Files and Directories... >>>> [ 23.733719] random: crng init done >>>> [ 25.605825] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP813 found >>>> [ OK ] Started Create Volatile Files and Directories. >>>> Starting Security Auditing Service... >>>> [ 25.816033] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded >>>> [ OK ] Started Security Auditing Service. >>>> Starting Update UTMP about System Boot/Shutdown... >>>> [ OK ] Started Update UTMP about System Boot/Shutdown. >>>> Starting Update UTMP about System Runlevel Changes... >>>> [ OK ] Started Update UTMP about System Runlevel Changes. >>>> Welcome to emergency mode! After logging in, type "journalctl -xPress >>>> enter for maintenance(or type Control-D to continue): [ 26.911598] >>>> input: axp20x-pek as >>>> /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0 >>>> >>>> [ 27.082356] ac100-rtc ac100-rtc: rtc core: registered rtc-ac100 as >>>> rtc0 >>>> [ 27.163368] ac100-rtc ac100-rtc: RTC enabled >>>> [ 27.272882] usb-storage 1-1:1.0: USB Mass Storage device detected >>>> [ 27.317836] scsi host0: usb-storage 1-1:1.0 >>>> [ 27.372202] usbcore: registered new interface driver usb-storage >>>> [ 27.510019] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif >>>> mapping ok >>>> [ 27.516919] asoc-simple-card sound: ASoC: no DMI vendor name! >>>> [ 27.540329] usbcore: registered new interface driver uas >>>> >>>> sulogin: failed to execute /bin/bash: Permission denied >>>> sulogin: failed to execute /bin/sh: Permission denied >>>> Can not execute su shell >>>> >>>> Error getting authority: Error initializing authority: Could not >>>> connect: No such file or directory (g-io-error-quark, 1) >>>> [ 31.615654] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to >>>> feature incompatibilities >>>> Welcome to emergency mode! After logging in, type "journalctl -xPress >>>> enter for maintenance(or type Control-D to continue): >>>> sulogin: failed to execute /bin/bash: Permission denied >>>> sulogin: failed to execute /bin/sh: Permission denied >>>> Can not execute su shell >>>> >> That sounds like a corrupted sd card. WRT installing the kernel, you can go back to this mail https://lists.centos.org/pipermail/arm-dev/2018-August/003399.html from a few days ago. Pablo.