On 08/22/2018 04:38 PM, Iván Chavero wrote: > El lun, 20-08-2018 a las 16:06 -0300, Pablo Sebastián Greco escribió: <snip> >> Iván, I didn't have time today to build 4.18 today, but I pushed >> 4.17.17, and it should appear here >> https://armv7.dev.centos.org/repodir/community-kernel-latest/kernel/ >> between today and tomorrow. >> It has smp for a83t (bananapi-m3 and cubieborard5) >> Your hdmi patch for cubieboard5. >> Some other fixes for R40. >> >> It would be great if you could test it. > > I will and report on this thread, thanks! > OK Guys, I bought a Cubieboard5 a very long time ago to test on CentOS-7. Years later, it finally works :). I worked with Pablo to test his 4.17.17 kernel, using this thread, specifically this post: https://lists.centos.org/pipermail/arm-dev/2018-August/003399.html I am happy to say that I now have it working now. My only real issues were: 1. The '/etc/sysconfig/network-scripts/ifcfg-link.sh' needing to be deleted and a permanent MACADDR added. This post by Robert used to Delete the ifcfg-link.sh and I created a static IP with a MACADDR: https://lists.centos.org/pipermail/arm-dev/2018-August/003366.html (don't forget to edit ifcfg-eth0.sh and change HWADDR= to MACADDR=) 2. I am getting a usb bus hang .. it normally takes about 5 minutes for the bus to reset, then everything seems to be OK. After setting everything up, I did try using the latest Fedora 29 Cubieboard5 u-boot-sunxi-with-spl.bin. That one did not fix either the MACADDR issue or the usb bus hang. Thanks, Johnny Hughes -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20180826/07ba311f/attachment-0006.sig>