[Arm-dev] Instructions for installation on an Odroid HC1
Robert Moskowitz
rgm at htt-consult.com
Thu Dec 6 16:22:29 UTC 2018
Pablo,
I have been busy on the Fedora-arm list getting F29 working on the
Odroid-HC1. I figured if I could get F29 working, I could port that
knowledge over to Centos-arm. More on what I accomplished later...
I grabbed this image, dropped it on a uSD, did the various needed steps
and tried to boot. It failed because there is nothing really in /boot!
==============
U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: hc1
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
685 bytes read in 4 ms (167 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command: autoboot
Ignoring malformed menu command: hidden
Ignoring unknown command: totaltimeout
CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
(4.19.5-300.el7.armv7
hl)
Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
.5-300.el7.armv7hl)
Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
** File not found /initrd-4.19.5-300.el7.armv7hl.img **
Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
(4.19.5-300.el7.armv
7hl) for failure retrieving initrd
SCRIPT FAILED: continuing...
starting USB...
USB0: USB EHCI 1.00
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
======================
no initrd for starters...
Bob
On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>
> Robert, I didn't want to send this to the list, but the image that
> will appear on the mirrors are temporarily hosted here
> https://armv7.dev.centos.org/repos/images/.
>
> You'll see that there is a generic-419, it is a test image I built
> (never had time to test myself), that comes with kernel 4.19 instead
> of 4.14, so it can be used with newer devices.
>
> Let me know how it goes..... :)
>
> Pablo.
>
> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>> The power supply and serial connection came today, so now to build my
>> first image.
>>
>> I see that we are still on the 1804 images, and seem to recall that
>> there was work to do to get that working.
>>
>> Can someone give me the current recommended installation steps?
>>
>> I would prefer that all partitions are on the sata drive, only uboot
>> on the uSD.
>>
>> thanks.
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/fc9c75e4/attachment.html>
More information about the Arm-dev
mailing list