[Arm-dev] Instructions for installation on an Odroid HC1
Robert Moskowitz
rgm at htt-consult.com
Thu Dec 6 16:52:01 UTC 2018
On 12/6/18 11:22 AM, Robert Moskowitz wrote:
> Pablo,
>
> I have been busy on the Fedora-arm list getting F29 working on the
> Odroid-HC1. I figured if I could get F29 working, I could port that
> knowledge over to Centos-arm. More on what I accomplished later...
>
> I grabbed this image, dropped it on a uSD, did the various needed
> steps and tried to boot. It failed because there is nothing really in
> /boot!
>
> ==============
BTW, an mostly empty /boot is the same problem I was up against with F30
rawhide RC5 minimal. RC5 Server had the files, but has an SELinux bug,
so I fell back to working with F29.
>
>
> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>
> CPU: Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type: hc1
> DRAM: 2 GiB
> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
> Loading Environment from MMC... Card did not respond to voltage select!
> *** Warning - No block device, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: No ethernet found.
> Hit any key to stop autoboot: 0
> MMC Device 1 not found
> no mmc device at slot 1
> Card did not respond to voltage select!
> switch to partitions #0, OK
> mmc2 is current device
> Scanning mmc 2:2...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 685 bytes read in 4 ms (167 KiB/s)
> Ignoring unknown command: ui
> Ignoring malformed menu command: autoboot
> Ignoring malformed menu command: hidden
> Ignoring unknown command: totaltimeout
> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
> 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
> (4.19.5-300.el7.armv7
> hl)
> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
> .5-300.el7.armv7hl)
> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
> ** File not found /initrd-4.19.5-300.el7.armv7hl.img **
> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
> (4.19.5-300.el7.armv
> 7hl) for failure retrieving initrd
> SCRIPT FAILED: continuing...
> starting USB...
> USB0: USB EHCI 1.00
> USB1: Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
>
> ======================
>
> no initrd for starters...
>
> Bob
>
> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>>
>> Robert, I didn't want to send this to the list, but the image that
>> will appear on the mirrors are temporarily hosted here
>> https://armv7.dev.centos.org/repos/images/.
>>
>> You'll see that there is a generic-419, it is a test image I built
>> (never had time to test myself), that comes with kernel 4.19 instead
>> of 4.14, so it can be used with newer devices.
>>
>> Let me know how it goes..... :)
>>
>> Pablo.
>>
>> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>>> The power supply and serial connection came today, so now to build
>>> my first image.
>>>
>>> I see that we are still on the 1804 images, and seem to recall that
>>> there was work to do to get that working.
>>>
>>> Can someone give me the current recommended installation steps?
>>>
>>> I would prefer that all partitions are on the sata drive, only uboot
>>> on the uSD.
>>>
>>> thanks.
>>>
>>> _______________________________________________
>>> Arm-dev mailing list
>>> Arm-dev at centos.org
>>> https://lists.centos.org/mailman/listinfo/arm-dev
>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/8a73cb26/attachment.html>
More information about the Arm-dev
mailing list