[Arm-dev] Instructions for installation on an Odroid HC1

Pablo Sebastián Greco pablo at fliagreco.com.ar
Thu Dec 6 17:15:49 UTC 2018


Robert, you're right, I just mounted the 4.19 test image and /boot is a 
mess.
I'll try to solve that and get back to you.

In the meantime, you could fix the image by moving the components to 
their right name.

Pablo.

El 6/12/18 a las 13:52, Robert Moskowitz escribió:
>
>
> On 12/6/18 11:22 AM, Robert Moskowitz wrote:
>> Pablo,
>>
>> I have been busy on the Fedora-arm list getting F29 working on the 
>> Odroid-HC1.  I figured if I could get F29 working, I could port that 
>> knowledge over to Centos-arm.  More on what I accomplished later...
>>
>> I grabbed this image, dropped it on a uSD, did the various needed 
>> steps and tried to boot.  It failed because there is nothing really 
>> in /boot!
>>
>> ==============
>
> BTW, an mostly empty /boot is the same problem I was up against with 
> F30 rawhide RC5 minimal.  RC5 Server had the files, but has an SELinux 
> bug, so I fell back to working with F29.
>
>>
>>
>> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>>
>> CPU:   Exynos5422 @ 800 MHz
>> Model: Odroid XU3 based on EXYNOS5422
>> Board: Odroid XU3 based on EXYNOS5422
>> Type:  hc1
>> DRAM:  2 GiB
>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
>> Loading Environment from MMC... Card did not respond to voltage select!
>> *** Warning - No block device, using default environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> Hit any key to stop autoboot:  0
>> MMC Device 1 not found
>> no mmc device at slot 1
>> Card did not respond to voltage select!
>> switch to partitions #0, OK
>> mmc2 is current device
>> Scanning mmc 2:2...
>> Found /extlinux/extlinux.conf
>> Retrieving file: /extlinux/extlinux.conf
>> 685 bytes read in 4 ms (167 KiB/s)
>> Ignoring unknown command: ui
>> Ignoring malformed menu command:  autoboot
>> Ignoring malformed menu command:  hidden
>> Ignoring unknown command: totaltimeout
>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
>> 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>> (4.19.5-300.el7.armv7
>> hl)
>> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
>> .5-300.el7.armv7hl)
>> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
>> ** File not found /initrd-4.19.5-300.el7.armv7hl.img **
>> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>> (4.19.5-300.el7.armv
>> 7hl) for failure retrieving initrd
>> SCRIPT FAILED: continuing...
>> starting USB...
>> USB0:   USB EHCI 1.00
>> USB1:   Register 2000140 NbrPorts 2
>> Starting the controller
>> USB XHCI 1.00
>>
>> ======================
>>
>> no initrd for starters...
>>
>> Bob
>>
>> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>>>
>>> Robert, I didn't want to send this to the list, but the image that 
>>> will appear on the mirrors are temporarily hosted here 
>>> https://armv7.dev.centos.org/repos/images/.
>>>
>>> You'll see that there is a generic-419, it is a test image I built 
>>> (never had time to test myself), that comes with kernel 4.19 instead 
>>> of 4.14, so it can be used with newer devices.
>>>
>>> Let me know how it goes..... :)
>>>
>>> Pablo.
>>>
>>> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>>>> The power supply and serial connection came today, so now to build 
>>>> my first image.
>>>>
>>>> I see that we are still on the 1804 images, and seem to recall that 
>>>> there was work to do to get that working.
>>>>
>>>> Can someone give me the current recommended installation steps?
>>>>
>>>> I would prefer that all partitions are on the sata drive, only 
>>>> uboot on the uSD.
>>>>
>>>> thanks.
>>>>
>>>> _______________________________________________
>>>> Arm-dev mailing list
>>>> Arm-dev at centos.org
>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev
>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/ccf8f5a2/attachment-0001.html>


More information about the Arm-dev mailing list