[Arm-dev] Instructions for installation on an Odroid HC1
Pablo Sebastián Greco
pablo at fliagreco.com.ar
Fri Dec 7 21:30:57 UTC 2018
El 6/12/18 a las 14:37, Robert Moskowitz escribió:
> Pablo,
>
> On 12/6/18 12:15 PM, Pablo Sebastián Greco wrote:
>>
>> Robert, you're right, I just mounted the 4.19 test image and /boot is
>> a mess.
>> I'll try to solve that and get back to you.
>>
>> In the meantime, you could fix the image by moving the components to
>> their right name.
>>
>
> That means I know what to move were. Not likely to be right...
Robert, found the problem, and there should be a new version of the
image with /boot corrected in about 1 hour.
Please keep in mind that this version still uses kernel 4.19.5, which
suffers from the big blk-dev/ext4 bug, so it is just to test. I'll be
building a newer 4.19.x soon
Pablo.
>
> Robert
>
>>
>> Pablo.
>>
>> El 6/12/18 a las 13:52, Robert Moskowitz escribió:
>>>
>>>
>>> On 12/6/18 11:22 AM, Robert Moskowitz wrote:
>>>> Pablo,
>>>>
>>>> I have been busy on the Fedora-arm list getting F29 working on the
>>>> Odroid-HC1. I figured if I could get F29 working, I could port
>>>> that knowledge over to Centos-arm. More on what I accomplished
>>>> later...
>>>>
>>>> I grabbed this image, dropped it on a uSD, did the various needed
>>>> steps and tried to boot. It failed because there is nothing really
>>>> in /boot!
>>>>
>>>> ==============
>>>
>>> BTW, an mostly empty /boot is the same problem I was up against with
>>> F30 rawhide RC5 minimal. RC5 Server had the files, but has an
>>> SELinux bug, so I fell back to working with F29.
>>>
>>>>
>>>>
>>>> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>>>>
>>>> CPU: Exynos5422 @ 800 MHz
>>>> Model: Odroid XU3 based on EXYNOS5422
>>>> Board: Odroid XU3 based on EXYNOS5422
>>>> Type: hc1
>>>> DRAM: 2 GiB
>>>> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
>>>> Loading Environment from MMC... Card did not respond to voltage select!
>>>> *** Warning - No block device, using default environment
>>>>
>>>> In: serial
>>>> Out: serial
>>>> Err: serial
>>>> Net: No ethernet found.
>>>> Hit any key to stop autoboot: 0
>>>> MMC Device 1 not found
>>>> no mmc device at slot 1
>>>> Card did not respond to voltage select!
>>>> switch to partitions #0, OK
>>>> mmc2 is current device
>>>> Scanning mmc 2:2...
>>>> Found /extlinux/extlinux.conf
>>>> Retrieving file: /extlinux/extlinux.conf
>>>> 685 bytes read in 4 ms (167 KiB/s)
>>>> Ignoring unknown command: ui
>>>> Ignoring malformed menu command: autoboot
>>>> Ignoring malformed menu command: hidden
>>>> Ignoring unknown command: totaltimeout
>>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
>>>> 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
>>>> (4.19.5-300.el7.armv7
>>>> hl)
>>>> Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
>>>> (4.19
>>>> .5-300.el7.armv7hl)
>>>> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
>>>> ** File not found /initrd-4.19.5-300.el7.armv7hl.img **
>>>> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810
>>>> (4.19.5-300.el7.armv
>>>> 7hl) for failure retrieving initrd
>>>> SCRIPT FAILED: continuing...
>>>> starting USB...
>>>> USB0: USB EHCI 1.00
>>>> USB1: Register 2000140 NbrPorts 2
>>>> Starting the controller
>>>> USB XHCI 1.00
>>>>
>>>> ======================
>>>>
>>>> no initrd for starters...
>>>>
>>>> Bob
>>>>
>>>> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>>>>>
>>>>> Robert, I didn't want to send this to the list, but the image that
>>>>> will appear on the mirrors are temporarily hosted here
>>>>> https://armv7.dev.centos.org/repos/images/.
>>>>>
>>>>> You'll see that there is a generic-419, it is a test image I built
>>>>> (never had time to test myself), that comes with kernel 4.19
>>>>> instead of 4.14, so it can be used with newer devices.
>>>>>
>>>>> Let me know how it goes..... :)
>>>>>
>>>>> Pablo.
>>>>>
>>>>> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>>>>>> The power supply and serial connection came today, so now to
>>>>>> build my first image.
>>>>>>
>>>>>> I see that we are still on the 1804 images, and seem to recall
>>>>>> that there was work to do to get that working.
>>>>>>
>>>>>> Can someone give me the current recommended installation steps?
>>>>>>
>>>>>> I would prefer that all partitions are on the sata drive, only
>>>>>> uboot on the uSD.
>>>>>>
>>>>>> thanks.
>>>>>>
>>>>>> _______________________________________________
>>>>>> Arm-dev mailing list
>>>>>> Arm-dev at centos.org
>>>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>>
>>>>
>>>> _______________________________________________
>>>> Arm-dev mailing list
>>>> Arm-dev at centos.org
>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>
>>>
>>> _______________________________________________
>>> Arm-dev mailing list
>>> Arm-dev at centos.org
>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181207/50e839a1/attachment.html>
More information about the Arm-dev
mailing list