[Arm-dev] Instructions for installation on an Odroid HC1

Sun Dec 9 15:30:38 UTC 2018

Pablo,

I see a new 419-1820 and a 419-v26-1810 from yesterday.  I will first 
try the v26 as it is newer...

Robert

On 12/7/18 4:30 PM, Pablo Sebastián Greco wrote:
>
>
> El 6/12/18 a las 14:37, Robert Moskowitz escribió:
>> Pablo,
>>
>> On 12/6/18 12:15 PM, Pablo Sebastián Greco wrote:
>>>
>>> Robert, you're right, I just mounted the 4.19 test image and /boot 
>>> is a mess.
>>> I'll try to solve that and get back to you.
>>>
>>> In the meantime, you could fix the image by moving the components to 
>>> their right name.
>>>
>>
>> That means I know what to move were.  Not likely to be right...
> Robert, found the problem, and there should be a new version of the 
> image with /boot corrected in about 1 hour.
> Please keep in mind that this version still uses kernel 4.19.5, which 
> suffers from the big blk-dev/ext4 bug, so it is just to test. I'll be 
> building a newer 4.19.x soon
>
> Pablo.
>>
>> Robert
>>
>>>
>>> Pablo.
>>>
>>> El 6/12/18 a las 13:52, Robert Moskowitz escribió:
>>>>
>>>>
>>>> On 12/6/18 11:22 AM, Robert Moskowitz wrote:
>>>>> Pablo,
>>>>>
>>>>> I have been busy on the Fedora-arm list getting F29 working on the 
>>>>> Odroid-HC1.  I figured if I could get F29 working, I could port 
>>>>> that knowledge over to Centos-arm. More on what I accomplished 
>>>>> later...
>>>>>
>>>>> I grabbed this image, dropped it on a uSD, did the various needed 
>>>>> steps and tried to boot.  It failed because there is nothing 
>>>>> really in /boot!
>>>>>
>>>>> ==============
>>>>
>>>> BTW, an mostly empty /boot is the same problem I was up against 
>>>> with F30 rawhide RC5 minimal.  RC5 Server had the files, but has an 
>>>> SELinux bug, so I fell back to working with F29.
>>>>
>>>>>
>>>>>
>>>>> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>>>>>
>>>>> CPU:   Exynos5422 @ 800 MHz
>>>>> Model: Odroid XU3 based on EXYNOS5422
>>>>> Board: Odroid XU3 based on EXYNOS5422
>>>>> Type:  hc1
>>>>> DRAM:  2 GiB
>>>>> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
>>>>> Loading Environment from MMC... Card did not respond to voltage 
>>>>> select!
>>>>> *** Warning - No block device, using default environment
>>>>>
>>>>> In:    serial
>>>>> Out:   serial
>>>>> Err:   serial
>>>>> Net:   No ethernet found.
>>>>> Hit any key to stop autoboot:  0
>>>>> MMC Device 1 not found
>>>>> no mmc device at slot 1
>>>>> Card did not respond to voltage select!
>>>>> switch to partitions #0, OK
>>>>> mmc2 is current device
>>>>> Scanning mmc 2:2...
>>>>> Found /extlinux/extlinux.conf
>>>>> Retrieving file: /extlinux/extlinux.conf
>>>>> 685 bytes read in 4 ms (167 KiB/s)
>>>>> Ignoring unknown command: ui
>>>>> Ignoring malformed menu command:  autoboot
>>>>> Ignoring malformed menu command:  hidden
>>>>> Ignoring unknown command: totaltimeout
>>>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
>>>>> 1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>>>>> (4.19.5-300.el7.armv7
>>>>> hl)
>>>>> Enter choice: 1: 
>>>>> CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
>>>>> .5-300.el7.armv7hl)
>>>>> Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
>>>>> ** File not found /initrd-4.19.5-300.el7.armv7hl.img **
>>>>> Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
>>>>> (4.19.5-300.el7.armv
>>>>> 7hl) for failure retrieving initrd
>>>>> SCRIPT FAILED: continuing...
>>>>> starting USB...
>>>>> USB0:   USB EHCI 1.00
>>>>> USB1:   Register 2000140 NbrPorts 2
>>>>> Starting the controller
>>>>> USB XHCI 1.00
>>>>>
>>>>> ======================
>>>>>
>>>>> no initrd for starters...
>>>>>
>>>>> Bob
>>>>>
>>>>> On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>>>>>>
>>>>>> Robert, I didn't want to send this to the list, but the image 
>>>>>> that will appear on the mirrors are temporarily hosted here 
>>>>>> https://armv7.dev.centos.org/repos/images/.
>>>>>>
>>>>>> You'll see that there is a generic-419, it is a test image I 
>>>>>> built (never had time to test myself), that comes with kernel 
>>>>>> 4.19 instead of 4.14, so it can be used with newer devices.
>>>>>>
>>>>>> Let me know how it goes..... :)
>>>>>>
>>>>>> Pablo.
>>>>>>
>>>>>> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>>>>>>> The power supply and serial connection came today, so now to 
>>>>>>> build my first image.
>>>>>>>
>>>>>>> I see that we are still on the 1804 images, and seem to recall 
>>>>>>> that there was work to do to get that working.
>>>>>>>
>>>>>>> Can someone give me the current recommended installation steps?
>>>>>>>
>>>>>>> I would prefer that all partitions are on the sata drive, only 
>>>>>>> uboot on the uSD.
>>>>>>>
>>>>>>> thanks.
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Arm-dev mailing list
>>>>>>> Arm-dev at centos.org
>>>>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Arm-dev mailing list
>>>>> Arm-dev at centos.org
>>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>>
>>>>
>>>> _______________________________________________
>>>> Arm-dev mailing list
>>>> Arm-dev at centos.org
>>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>>
>>> _______________________________________________
>>> Arm-dev mailing list
>>> Arm-dev at centos.org
>>> https://lists.centos.org/mailman/listinfo/arm-dev
>>
>
> _______________________________________________
> Arm-dev mailing list
> Arm-dev at centos.org
> https://lists.centos.org/mailman/listinfo/arm-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181209/2d611c0c/attachment.html>