[Arm-dev] Instructions for installation on an Odroid HC1

[Robert Moskowitz]

On 12/10/18 1:08 PM, Pablo Sebastián Greco wrote:
>
> El 10/12/18 a las 14:53, Robert Moskowitz escribió:
>>
>>
>> On 12/9/18 3:45 PM, Pablo Sebastián Greco wrote:
>>> <snip>
>>>>> Thanks!  Getting it now....
>>>>
>>>> Looks like the same dracut failure.
>>>>
>>>> :(
>>>>
>>>>
>>> There must be another module missing, can you decompress the fedora 
>>> initramfs and list the used modules?
>>>
>>> You may need to use this command in an empty dir
>>>
>>> /usr/lib/dracut/skipcpio $your-img | gunzip -c | cpio -id
>>
>> After running:
>>
>> /usr/lib/dracut/skipcpio /boot/initramfs-4.18.16-300.fc29.armv7hl.img 
>> | gunzip -c | cpio -id
>>
>> in directory /root/info which was empty, I now have LOTS of entries:
>>
>> info]# ls -sl
>> total 8
>> 0 lrwxrwxrwx.  1 root root    7 Dec 10 12:51 bin -> usr/bin
>> 0 drwxr-xr-x.  2 root root   74 Dec 10 12:51 dev
>> 4 drwxr-xr-x. 12 root root 4096 Dec 10 12:51 etc
>> 0 lrwxrwxrwx.  1 root root   23 Dec 10 12:51 init -> 
>> usr/lib/systemd/systemd
>> 0 lrwxrwxrwx.  1 root root    7 Dec 10 12:51 lib -> usr/lib
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 proc
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 root
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 run
>> 0 lrwxrwxrwx.  1 root root    8 Dec 10 12:51 sbin -> usr/sbin
>> 4 -rwxr-xr-x.  1 root root 3130 Dec 10 12:51 shutdown
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 sys
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 sysroot
>> 0 drwxr-xr-x.  2 root root    6 Dec 10 12:51 tmp
>> 0 drwxr-xr-x.  6 root root   53 Dec 10 12:51 usr
>> 0 drwxr-xr-x.  4 root root   51 Dec 10 12:51 var
>>
>> What specifically should I be looking for?
>>
>> thanks
>>
> Basically, all the .ko files in usr/lib.
> Also, I left a new image with the modules Mark recommended, please try 
> that one.


YES!!!!

[  OK  ] Started Login Service.

CentOS Linux 7 (AltArch)
Kernel 4.19.7-300.el7.armv7hl on an armv7l

localhost login: root
Password:
Login incorrect

localhost login: root
Password:
Last failed login: Mon Dec 10 19:17:30 UTC 2018 on ttySAC2
There was 1 failed login attempt since the last successful login.

====

OK, I fat fingered the password....

Note that I am using the new uboot from F30 rawhide:

U-Boot 2019.01-rc1 (Dec 04 2018 - 18:03:53 +0000) for ODROID-XU3/XU4/HC1/HC2

Next test is to move the swap and the rootfs to the sata drive. This is 
really a 'simple' test.

But looks like we are good to go with the odroid-HC1.