[Arm-dev] Instructions for installation on an Odroid HC1

Thu Dec 6 16:22:29 UTC 2018
Robert Moskowitz <rgm at htt-consult.com>

Pablo,

I have been busy on the Fedora-arm list getting F29 working on the 
Odroid-HC1.  I figured if I could get F29 working, I could port that 
knowledge over to Centos-arm.  More on what I accomplished later...

I grabbed this image, dropped it on a uSD, did the various needed steps 
and tried to boot.  It failed because there is nothing really in /boot!

==============


U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1

CPU:   Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type:  hc1
DRAM:  2 GiB
MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
switch to partitions #0, OK
mmc2 is current device
Scanning mmc 2:2...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
685 bytes read in 4 ms (167 KiB/s)
Ignoring unknown command: ui
Ignoring malformed menu command:  autoboot
Ignoring malformed menu command:  hidden
Ignoring unknown command: totaltimeout
CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options.
1:    CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
(4.19.5-300.el7.armv7
hl)
Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19
.5-300.el7.armv7hl)
Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img
** File not found /initrd-4.19.5-300.el7.armv7hl.img **
Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 
(4.19.5-300.el7.armv
7hl) for failure retrieving initrd
SCRIPT FAILED: continuing...
starting USB...
USB0:   USB EHCI 1.00
USB1:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00

======================

no initrd for starters...

Bob

On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote:
>
> Robert, I didn't want to send this to the list, but the image that 
> will appear on the mirrors are temporarily hosted here 
> https://armv7.dev.centos.org/repos/images/.
>
> You'll see that there is a generic-419, it is a test image I built 
> (never had time to test myself), that comes with kernel 4.19 instead 
> of 4.14, so it can be used with newer devices.
>
> Let me know how it goes..... :)
>
> Pablo.
>
> El 2/12/18 a las 22:59, Robert Moskowitz escribió:
>> The power supply and serial connection came today, so now to build my 
>> first image.
>>
>> I see that we are still on the 1804 images, and seem to recall that 
>> there was work to do to get that working.
>>
>> Can someone give me the current recommended installation steps?
>>
>> I would prefer that all partitions are on the sata drive, only uboot 
>> on the uSD.
>>
>> thanks.
>>
>> _______________________________________________
>> Arm-dev mailing list
>> Arm-dev at centos.org
>> https://lists.centos.org/mailman/listinfo/arm-dev

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/fc9c75e4/attachment-0006.html>