On 12/6/18 11:22 AM, Robert Moskowitz wrote: > Pablo, > > I have been busy on the Fedora-arm list getting F29 working on the > Odroid-HC1. I figured if I could get F29 working, I could port that > knowledge over to Centos-arm. More on what I accomplished later... > > I grabbed this image, dropped it on a uSD, did the various needed > steps and tried to boot. It failed because there is nothing really in > /boot! > > ============== BTW, an mostly empty /boot is the same problem I was up against with F30 rawhide RC5 minimal. RC5 Server had the files, but has an SELinux bug, so I fell back to working with F29. > > > U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Type: hc1 > DRAM: 2 GiB > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 > Loading Environment from MMC... Card did not respond to voltage select! > *** Warning - No block device, using default environment > > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > MMC Device 1 not found > no mmc device at slot 1 > Card did not respond to voltage select! > switch to partitions #0, OK > mmc2 is current device > Scanning mmc 2:2... > Found /extlinux/extlinux.conf > Retrieving file: /extlinux/extlinux.conf > 685 bytes read in 4 ms (167 KiB/s) > Ignoring unknown command: ui > Ignoring malformed menu command: autoboot > Ignoring malformed menu command: hidden > Ignoring unknown command: totaltimeout > CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 Boot Options. > 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 > (4.19.5-300.el7.armv7 > hl) > Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 (4.19 > .5-300.el7.armv7hl) > Retrieving file: /initrd-4.19.5-300.el7.armv7hl.img > ** File not found /initrd-4.19.5-300.el7.armv7hl.img ** > Skipping CentOS-Userland-7-armv7hl-generic-Minimal-419-1810 > (4.19.5-300.el7.armv > 7hl) for failure retrieving initrd > SCRIPT FAILED: continuing... > starting USB... > USB0: USB EHCI 1.00 > USB1: Register 2000140 NbrPorts 2 > Starting the controller > USB XHCI 1.00 > > ====================== > > no initrd for starters... > > Bob > > On 12/3/18 5:45 AM, Pablo Sebastián Greco wrote: >> >> Robert, I didn't want to send this to the list, but the image that >> will appear on the mirrors are temporarily hosted here >> https://armv7.dev.centos.org/repos/images/. >> >> You'll see that there is a generic-419, it is a test image I built >> (never had time to test myself), that comes with kernel 4.19 instead >> of 4.14, so it can be used with newer devices. >> >> Let me know how it goes..... :) >> >> Pablo. >> >> El 2/12/18 a las 22:59, Robert Moskowitz escribió: >>> The power supply and serial connection came today, so now to build >>> my first image. >>> >>> I see that we are still on the 1804 images, and seem to recall that >>> there was work to do to get that working. >>> >>> Can someone give me the current recommended installation steps? >>> >>> I would prefer that all partitions are on the sata drive, only uboot >>> on the uSD. >>> >>> thanks. >>> >>> _______________________________________________ >>> Arm-dev mailing list >>> Arm-dev at centos.org >>> https://lists.centos.org/mailman/listinfo/arm-dev > > > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/arm-dev/attachments/20181206/8a73cb26/attachment-0006.html>