El 9/12/18 a las 13:25, Robert Moskowitz escribió: > > > On 12/9/18 10:45 AM, Pablo Sebastián Greco wrote: >> >> >> El 9/12/18 a las 12:30, Robert Moskowitz escribió: >>> Pablo, >>> >>> I see a new 419-1820 and a 419-v26-1810 from yesterday. I will >>> first try the v26 as it is newer... >> Correct, both images come from the same ks, but generated with >> different versions of livecd-tools. Better if you use the v26 >> version, since it is what we'd like to use in the future. > > It failed. I dd the image to a 16GB uSD and used gparted to grow the > rootfs partition. I used hardkernel's script to add the boot loader > as I did with F29 testing, but used the uboot you have on your image. > Same 9/18 date, but slightly larger file. I then appended the boot > info with: > > sed -i "s|append|& cpuidle.off=1 \ > console=tty1 console=ttySAC2,115200n8 \ > rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \ > /run/media/rgm/__boot/extlinux/extlinux.conf > > Put the card in the odroid-hc1 and got: > > U-Boot 2018.09 (Nov 27 2018 - 12:48:09 +0000) for ODROID-XU3/XU4/HC1 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Type: hc1 > DRAM: 2 GiB > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 > Loading Environment from MMC... Card did not respond to voltage select! > *** Warning - No block device, using default environment > > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > MMC Device 1 not found > no mmc device at slot 1 > Card did not respond to voltage select! > switch to partitions #0, OK > mmc2 is current device > Scanning mmc 2:2... > Found /extlinux/extlinux.conf > Retrieving file: /extlinux/extlinux.conf > 727 bytes read in 4 ms (176.8 KiB/s) > Ignoring unknown command: ui > Ignoring malformed menu command: autoboot > Ignoring malformed menu command: hidden > Ignoring unknown command: totaltimeout > CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 Boot Options. > 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 > (4.19.7-300.el7.a > rmv7hl) > Enter choice: 1: CentOS-Userland-7-armv7hl-generic-Minimal-419-v26-1810 ( > 4.19.7-300.el7.armv7hl) > Retrieving file: /initramfs-4.19.7-300.el7.armv7hl.img > 47336545 bytes read in 3110 ms (14.5 MiB/s) > Retrieving file: /vmlinuz-4.19.7-300.el7.armv7hl > 7127552 bytes read in 475 ms (14.3 MiB/s) > append: cpuidle.off=1 console=tty1 console=ttySAC2,115200n8 > rd.driver.pre=ledtri > g-heartbeat,xhci-plat-hcd no_bL_switcher ro > root=UUID=df5b1afd-af92-4a3f-b6d8-00 > 5320ba30b7 rhgb quiet LANG=en_US.UTF-8 > Retrieving file: /dtb-4.19.7-300.el7.armv7hl/exynos5422-odroidhc1.dtb > 52518 bytes read in 84 ms (610.4 KiB/s) > Kernel image @ 0x42000000 [ 0x000000 - 0x6cc200 ] > ## Flattened Device Tree blob at 43000000 > Booting using the fdt blob at 0x43000000 > Loading Ramdisk to 4d2db000, end 4ffffc61 ... OK > Loading Device Tree to 4d2cb000, end 4d2dad25 ... OK > > Starting kernel ... > > [ OK ] Started Show Plymouth Boot Screen. > [ OK ] Reached target Paths. > [ OK ] Started Forward Password Requests to Plymouth Directory Watch. > [ OK ] Reached target Basic System. > Mounting Configuration File System... > [ OK ] Mounted Configuration File System. > [ 148.500221] dracut-initqueue[482]: Warning: dracut-initqueue > timeout - star > ting timeout scripts > [ 149.116935] dracut-initqueue[482]: Warning: dracut-initqueue > timeout - starti > ng timeout scripts > [ 149.688854] dracut-initqueue[482]: Warning: dracut-initqueue > timeout - starti > ng timeout scripts > [ 150.259929] dracut-initqueue[482]: Warning: dracut-initqueue > timeout - starti > ng timeout scripts > [ 150.831854] dracut-initqueue[482]: Warning: dracut-initqueue > timeout - starti > ng timeout scripts > > .... snip > > [ 216.440176] dracut-initqueue[4Warning: > /dev/disk/by-uuid/df5b1afd-af92-4a3f-b > 6d8-005320ba30b7 does not exist > > Generating "/run/initramfs/rdsosreport.txt" > > > Entering emergency mode. Exit the shell to continue. > Type "journalctl" to view system logs. > You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick > or /boot > after mounting them and attach it to a bug report. > > > dracut:/# > > Now what? > > Robert > > Robert, that sounds like this https://lists.centos.org/pipermail/arm-dev/2018-August/003399.html