El 10/12/18 a las 14:53, Robert Moskowitz escribió: > > > On 12/9/18 3:45 PM, Pablo Sebastián Greco wrote: >> <snip> >>>> Thanks! Getting it now.... >>> >>> Looks like the same dracut failure. >>> >>> :( >>> >>> >> There must be another module missing, can you decompress the fedora >> initramfs and list the used modules? >> >> You may need to use this command in an empty dir >> >> /usr/lib/dracut/skipcpio $your-img | gunzip -c | cpio -id > > After running: > > /usr/lib/dracut/skipcpio /boot/initramfs-4.18.16-300.fc29.armv7hl.img > | gunzip -c | cpio -id > > in directory /root/info which was empty, I now have LOTS of entries: > > info]# ls -sl > total 8 > 0 lrwxrwxrwx. 1 root root 7 Dec 10 12:51 bin -> usr/bin > 0 drwxr-xr-x. 2 root root 74 Dec 10 12:51 dev > 4 drwxr-xr-x. 12 root root 4096 Dec 10 12:51 etc > 0 lrwxrwxrwx. 1 root root 23 Dec 10 12:51 init -> > usr/lib/systemd/systemd > 0 lrwxrwxrwx. 1 root root 7 Dec 10 12:51 lib -> usr/lib > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 proc > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 root > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 run > 0 lrwxrwxrwx. 1 root root 8 Dec 10 12:51 sbin -> usr/sbin > 4 -rwxr-xr-x. 1 root root 3130 Dec 10 12:51 shutdown > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 sys > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 sysroot > 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 tmp > 0 drwxr-xr-x. 6 root root 53 Dec 10 12:51 usr > 0 drwxr-xr-x. 4 root root 51 Dec 10 12:51 var > > What specifically should I be looking for? > > thanks > Basically, all the .ko files in usr/lib. Also, I left a new image with the modules Mark recommended, please try that one. Pablo.