On 12/10/18 1:08 PM, Pablo Sebastián Greco wrote: > > El 10/12/18 a las 14:53, Robert Moskowitz escribió: >> >> >> On 12/9/18 3:45 PM, Pablo Sebastián Greco wrote: >>> <snip> >>>>> Thanks! Getting it now.... >>>> >>>> Looks like the same dracut failure. >>>> >>>> :( >>>> >>>> >>> There must be another module missing, can you decompress the fedora >>> initramfs and list the used modules? >>> >>> You may need to use this command in an empty dir >>> >>> /usr/lib/dracut/skipcpio $your-img | gunzip -c | cpio -id >> >> After running: >> >> /usr/lib/dracut/skipcpio /boot/initramfs-4.18.16-300.fc29.armv7hl.img >> | gunzip -c | cpio -id >> >> in directory /root/info which was empty, I now have LOTS of entries: >> >> info]# ls -sl >> total 8 >> 0 lrwxrwxrwx. 1 root root 7 Dec 10 12:51 bin -> usr/bin >> 0 drwxr-xr-x. 2 root root 74 Dec 10 12:51 dev >> 4 drwxr-xr-x. 12 root root 4096 Dec 10 12:51 etc >> 0 lrwxrwxrwx. 1 root root 23 Dec 10 12:51 init -> >> usr/lib/systemd/systemd >> 0 lrwxrwxrwx. 1 root root 7 Dec 10 12:51 lib -> usr/lib >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 proc >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 root >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 run >> 0 lrwxrwxrwx. 1 root root 8 Dec 10 12:51 sbin -> usr/sbin >> 4 -rwxr-xr-x. 1 root root 3130 Dec 10 12:51 shutdown >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 sys >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 sysroot >> 0 drwxr-xr-x. 2 root root 6 Dec 10 12:51 tmp >> 0 drwxr-xr-x. 6 root root 53 Dec 10 12:51 usr >> 0 drwxr-xr-x. 4 root root 51 Dec 10 12:51 var >> >> What specifically should I be looking for? >> >> thanks >> > Basically, all the .ko files in usr/lib. > Also, I left a new image with the modules Mark recommended, please try > that one. YES!!!! [ OK ] Started Login Service. CentOS Linux 7 (AltArch) Kernel 4.19.7-300.el7.armv7hl on an armv7l localhost login: root Password: Login incorrect localhost login: root Password: Last failed login: Mon Dec 10 19:17:30 UTC 2018 on ttySAC2 There was 1 failed login attempt since the last successful login. ==== OK, I fat fingered the password.... Note that I am using the new uboot from F30 rawhide: U-Boot 2019.01-rc1 (Dec 04 2018 - 18:03:53 +0000) for ODROID-XU3/XU4/HC1/HC2 Next test is to move the swap and the rootfs to the sata drive. This is really a 'simple' test. But looks like we are good to go with the odroid-HC1.