Great!!!. After you file the bug, please post back here for reference. Pablo. El 4/2/18 a las 16:56, Chris Szilagyi escribió: > On 02/04/2018 01:07 PM, Pablo Sebastián Greco wrote: > > [SNIP] > >> If you copied the right .config, it shouldn't ask anything. Make >> oldconfig just takes your current .config and asks for what is >> missing (current as in copied to the root of your kernel build dir, >> not as in "booted" version). >> I have never done what you are doing, but I would do it this way: >> 1) rpmbuild -bp kernel.spec so original patches are applied. >> 2) copy current config from /boot to .config in your build environment >> 3) apply the patch you want >> 4) make oldconfig (should not ask a single question, since you didn't >> activate anything) >> 5) continue with your usual steps. >> >> HTH. >> Pablo. > > That worked! Thanks so much. I followed your instructions and > everything worked straight through this time. I did also need to copy > Module.symvers from the source from the kernel-devel package to the > build directory, but your solution did the trick. The module compiled > and everything is working now with the Hauppauge device! > > I will also submit a bug as suggested as well, in case this can help > others, too. > > Chris > _______________________________________________ > Arm-dev mailing list > Arm-dev at centos.org > https://lists.centos.org/mailman/listinfo/arm-dev >